1964 Chevelle, Malibu, El Camino; Front Bumper Bracket Set; 4-Pieces
Reproduction front bumper bracket set for 1964 Chevrolet Chevelle, Malibu, and El Camino models. Manufactured in stamped steel to factory specifications, each bracket replicates the original design for proper fit, strength,...
1965 Chevelle, Malibu, El Camino; Front Bumper Bracket Set; 4-Pieces
Reproduction front bumper bracket set for 1965 Chevrolet Chevelle, Malibu, and El Camino models. Manufactured in stamped steel to factory specifications, each bracket replicates the original design for proper fit, strength,...
Reproduction license plate rubber bumpers for various GM models including 1967-68 Camaro front or rear. Each bumper replicates the original in fit and appearance. Will replace the original worn out or missing original rubber...
1978-1987 Chevrolet El Camino, Malibu; Front Bumper Filler Set; Urethane Rubber
1978-1987 Chevrolet El Camino, 1978-83 Malibu urethane rubber front bumper fillers. Replaces GM part#'s 14044259 LH and 14044260 RH. Sold by the pair.
1965 Chevelle, Malibu, El Camino; Grill to Bumper Filler Panel
Reproduction grille to bumper filler panel for 1965 Chevelle, Malibu, and El Camino models. Manufactured in stamped steel to factory specifications, this panel is designed to fill the gap between the grille and front bumper...
1966 Chevelle, Malibu, El Camino; Grill to Bumper Filler Panel; Replaces GM# 3871080
Reproduction front bumper to grill filler panel for 1966 Chevelle, Malibu, El Camino models. Manufactured in stamped steel to exact factory specifications replicating the original in quality and design. Features correct...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1976-77 Chevrolet Malibu, El Camino, Laguna; Front Bumper Fillers; 2nd Design
1976-1977 Chevrolet Malibu 2dr, 4dr, wagon, Laguna, and El Camino reproduction front bumper filler panels. These filler panels fill the gap between the fender and the bumper. They are made out of rubber like the originals....
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1964-68 Chevelle, Malibu, Tempest, Lemans, GTO; License Plate Bracket; Gas Door; Rear
License plate bracket for 1964-68 Chevrolet and Pontiac A-Body models, including Chevelle, Malibu, Tempest, Lemans, and GTO. Manufactured in stamped steel and includes the spring that allows you to flip it open for access to...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut
Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...
7/16"-14 X 1" Bolt With Hex Nut; Zinc Plated; With 29/32" Flat Stainless Steel Cap
This stainless capped bolt is used on both the front or rear, features the correct style head and includes a hex nut. Manufactured in zinc plated material, measures 7/16"-14 and is 1" and features a stainless steel cap. Head...
Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1966-67 Chevrolet Chevelle, Malibu; Rear Bumper Bracket Set; 4 Pieces
Reproduction rear bumper bracket set for 1966-67 Chevelle and Malibu makes replacing your damaged or rusted bumper and bumper components easier. Correct stamped steel brackets with all the proper mounting holes in correct...
1967 Chevelle, Malibu, El Camino; Front Bumper Bracket Set; 4-Pieces
Reproduction front bumper brackets for 1967 Chevelle, Malibu, and El Camino models makes replacing your damaged bumper easy. Correct stamped steel brackets with all the proper mounting holes in correct locations. Each side...
Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...
1967 Chevelle, Malibu, El Camino; Grill to Bumper Filler Panel; Replaces GM# 3893903
Reproduction front bumper to grill filler panel for 1967 Chevelle, Malibu, El Camino models. Manufactured in stamped steel to exact factory specifications replicating the original in quality and design. Features correct...
License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear
Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...
Reproduction rear license plate mounting bracket and chrome center bumper filler bar for 1964-65 Chevelle, Malibu, and El Camino models. Manufactured to factory specifications, includes the steel rear license plate mounting...
License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...
License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)
Correct replacement license plate nylon nut insert and slotted pan head screw used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality...
1964-65 Chevelle, El Camino, Malibu; Front License Plate Bracket
Reproduction license plate bracket for 1964-65 Chevelle, El Camino, and Malibu models. This bracket mounts to the front bumper and the license plate is mounted to it. Manufactured in stamped steel to factory specifications...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1/2" Hole; GM # 14103461; 25 Pieces
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold in set of 25 pieces. Use as required....
7/16"-14 X 1-3/8"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head
This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 7/16"-14 X 1-3/8" and features a stainless steel cap. Head diameter 7/8". Shoulder length...
7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish
7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish. Sold inidvidually.
Original Equipment Reproduction License Plate
Put a highly visible accent on your restoration with a quality aluminum OER® license plate, a recognized symbol of originality and authenticity.
M6-1.0 Metric Standard Flange Spin Lock Nut with Serrations; Pair
M6-1.0 metric standard flange spin lock nut with serrations. Sold as a pair.
1966 Chevelle, Malibu, El Camino; Front Bumper Bracket Set; 4-Pieces
Reproduction front bumper brackets for 1966 Chevelle, Malibu, and El Camino models makes replacing your damaged bumper easy. Correct stamped steel brackets with all the proper mounting holes in correct locations. Each side...
License Plate Mounting Kit; Features Slotted Round Washer Head Screws; (4 Screws, 4 Nuts)
This license plate mounting set comes with four plastic nuts and four screws, which is enough to mount one license plate. These are original style nuts and screws, and they'll make sure your license plate stays securely...
1955-77 Ford; Bumper Bolt; Stainless Steel Cap; 7/16-14 x 1-1/2"; Various Models; Box of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
5/16-18" x 3/4" Bolt; With Stainless Steel Cap; Each
Reproduction 5/16-18" x 3/4" bumper bolt with stainless steel cap for various Ford and other models. Perfect as a replacement for the small 1964-70 Mustang front bumper end mounting bolt. Sold individually. Specifications:...
7/16-14 x 1-1/2"; Bumper Bolt; Stainless Steel Cap; Each
Reproduction bumper bolt that measures 7/16-14 x 1-1/2" with a stainless steel cap and round head willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company models. Sold...
Push-in retainer clip, also know as a blind rivet for various GM applications. Fits a wide number of applications including front and rear bumper fascia, and other urethane and plastic body components. Fits 1/2" hole. Set of...
7/16"-14 x 1-1/4" Hex Bolt, Grade 5, Zinc
7/16"-14 x 1-1/4" Hex Bolt, Grade 5, Zinc chromate finish. Sold individually.