1956-80 General Motors / Mopar Truck Power Steering Return Hose
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
1958-68 Chevy, GMC; Power Steering Power Cylinder; Various Car & Truck Models
Reproduction power steering slave cylinder for 1958-64 Chevrolet full size, 1960-68 GM truck, and 1962-67 Chevy II/Nova models. Our most economical solution to keep your power steering system functioning. IMPORTANT: Flush...
1970-74 Chevrolet, Pontiac; Chrome Power Steering Pump; with "A-Style" Reservoir; 6 or 8 Cylinder
Dress up your engine compartment with this all new OER® Authorized chrome power steering pump with a banjo style reservoir. This all new pump is a great replacement for 6 or 8 cylinder models. This power steering pump...
If you're looking for a power steering pump for your classic vehicle and are finding that your part has become obsolete and cores for reman units are unavailable, you can now replace that obsolete pump with a brand-new...
If you're looking for a power steering pump for your classic vehicle and are finding that your part has become obsolete and cores for reman units are unavailable, you can now replace that obsolete pump with a brand-new...
3/8" X 48" Power Steering Return Hose; Without Fittings; Cut to Fit
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
1961-99 GM, Chrysler, Dodge Plymouth; Saginaw Power Steering Pump Cap
Reproduction of the power steering pump cap designed for use with a variety of 1961-2005 GM, and Chrysler, Dodge, Plymouth models that included a Saginaw power steering pump. Each cap is manufactured in quality injection...
1967-74 Camaro, Impala, Nova, El Camino; Power Steering Pulley; Deep Groove
Reproduction of the original style deep single groove power steering pulley designed for use with various 1967-74 Chevrolet models as listed. Each pulley is manufactured in stamped steel replicating the original dimensions...
Reproduction of the original style power steeing pump fitting for use with various 1960-77 Chrysler, Dodge, Plymouth, and GM models as listed. Many Saginaw power steering pumps with a female style fitting require an adapter...
1955-72 Chevrolet Power Steering Bracket Set; Small Block; LH Side Mount; w/Short Water Pump; Chrome
This convenient 1/4" steel power steering bracket set is designed for mounting GM Saginaw power steering pumps, with integral reservoir, to small block Chevy engines. Features a polished chrome finish. Universal LH side...
Power Steering Pump or Smog Pump Bracket Spacer; 3/4" O.D. x 3/8" wide
This spacer is used between the power steering pump and mounting bracket or the smog pump and the mounting bracket on various GM models. Use as required. 3/8" width 27/64" inside dia 3/4" outside dia
1965-81 Buick, Chevy, Olds, Pontiac; Power Steering Return Hose
Reproduction of the original power steering return hose for use with various 1971-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each hose is manufactured to specific factory dimensions replicating the original in...
3/8" x 24" Power Steering Return Hose; Without Fittings; Cut to Fit
Service replacement power steering hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn out or cracked power...
1970-75 Chevrolet, GMC; Power Steering Reservoir; with Hardware; Black Powder Coated
Reproduction of the original style power steering reservoir designed fos use with 1970-75 Chevrolet and GMC models as listed. Replace the old, dented, leaking, or missing reservoir with thei authentic style reproduction. This...
1968-72 Chevrolet, GMC Truck; Power Steering Reservoir, Cover; Big Block; Black
Reproduction of the original style power steering reservoir designed for use with 1968-72 Chevrolet and GMC truck models with big block. Replace the old, dented, leaking, or missing reservoir with this authentic style...
1968-72 Chevrolet/GMC C/K Pickup; Big Block; Power Steering Reservoir And Cap Kit; Black
This brand new power steering remote reservoir has a beautiful OEM appearance and function. Remote canister style reservoir comes with attached short 1" bracket, correct style cap, and mounting hardware. Fits 1968-72 big...
1959-72 GM; Power Steering Cap; for Saginaw Remote Reservoir; Big Block
Reproduction power steering cap for saginaw power steering remote reservoir on various 1959-72 GM models including several popular 1965-68 Chevrolet big block equipped muscle car and 1968-72 big block equipped C/K truck...
1978-2006 Power Steering Pump Supply Hose Fitting; Metric; O-ring Style
Power steering pump supply hose fitting for 1978-2006 Saginaw power steering pumps requiring a metric style fitting with the o-ring style seal. This fitting is necessary to mount the cover to the pump and connects to the...
1962-69 Buick, Chevy, GMC; Olds; Power Steering Pump; with "Banjo Style" Reservoir; New, Not Rebuilt
If you're looking for a power steering pump for your classic vehicle and are finding that your part has become obsolete and cores for reman units are unavailable, you can now replace that obsolete pump with a brand-new...
1970-72 Power Steering Pump with Banjo Style Reservoir; Brand New
If you're looking for a power steering pump for your classic vehicle and are finding that your part has become obsolete and cores for reman units are unavailable, you can now replace that obsolete pump with a brand-new...
1973-74 6-Cylinder Power Steering Pump with "A-Style" Reservoir
If you're in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...
1961-72 Chevy, Buick, Olds; Power Steering Pump; with Reservoir; 6 & 8 Cyl. 198, 215, 283, 327; New
If you're looking for a power steering pump for your classic vehicle and are finding that your part has become obsolete and cores for reman units are unavailable, you can now replace that obsolete pump with a brand-new...
1965-68 Chevrolet; Power Steering Adjustor Bracket ; 283ci, 307ci, 327ci; Small Block
OER® reproduction of the original small block power steering adjustor bracket for use with various 1965-68 GM small block models. Manufactured in stamped steel, this bracket was original installed for a variety of...
1969-72 Chevrolet, GMC; Power Steering Adjust Bracket; Small Block; Car & Truck; Various Models
Correct reproduction of the original power steering bracket designed for use with various 1969-1972 Chevrolet models wirh small block engines. Each bracket is manufactured in stamped steel replicating the original...
1970-72 Chevrolet; Power Steering Bracket Set; Big Block; 2 Piece
This quality reproduction big block power steering bracket set is designed for use with 1970-72 models with a big block. The set includes the upper bracket stamped with OE # 3967420 and the lower bracket stamped with OE#...
1969-86 Chevrolet; Power Steering Bracket Set; Small Block; with Long Water Pump; with Hardware
This convenient aluminum power steering bracket set is designed for 1969-86 small block Chevy engines with long water pump. Mounts the power steering pump on the LH or drivers side of the vehicle using the long style water...
1960-75 Camaro, Impala, Nova, Truck; Power Steering Pump Pulley; Single Groove
OER® reproduction of the original power steering pump pulley designed for use with for various 1960-75 Chevrolet models as listed. Manufactured from formed and machined steel with the correct key way fit design and...
Reproduction power steering pump bracket which is required when mounting the power steering pump on Big Block applications.
This is a quality OER® reproduction of the original power steering pump pulley designed for use on various GM applications..This pulley is manufactured to exact factory specifications and stamped with the original GM part...
Replace that dented, leaky or missing reservoir with a brand new reproduction. This reservoir comes with all o-rings and fittings necessary to install on your power steering pump. When appearance is a concern, this OE style...
1960-1972 Buick, Chevy, GMC, Pontiac, Oldsmobile; Power Steering Pump Cap; OEM Style; Various Models
Reproduction original power steering pump cap for various 1961-72 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile models as listed. This is not a factory service replacement or aftermarket cap, this is a genuine reproduction...
This brand new reservoir has a beautiful OEM appearance and function. Comes with attached short 1" bracket and mounting hardware. Cap is sold separately under part # 3908539. Fits 1968-72 big block engine equipped C/K truck...
Power Steering Return Hose; 3/8" I.D. X 36"; Cut to Fit
Reproduction of the original style power steering return hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn...
Power Steering Pressure Line Clamp
This OER® line clamp is manufactured from die stamped steel. Each piece is plated in clear zinc to help protect it from rust and corrosion. Clip slips over the high pressure line and is secured to the gear box top cover...
1965-72 Chevrolet, GMC; Power Steering Pump Remote Reservoir Canister; Big Block; Long 2" Bracket
This all new reservoir features a beautiful OEM appearance and functionality for models listed. Comes with attached 2" bracket and mounting hardware. Fits various big block engine equipped models with remote reservoir. This...
1963-77 Power Steering Pump Supply Hose Fitting; SAE; Inverted Flare Style
Power steering pump supply hose fitting for 1977 and older Saginaw pumps requiring an SAE style fitting with the inverted flare. This fitting is necessary to mount the cover to the pump and connects to the supply pressure...
1968-72 Chevrolet/GMC C/K Pickup; Big Block; Power Steering Pump Kit; With Reservoir And Cap; Black
This brand new power steering pump kit with remote reservoir has a beautiful OEM appearance and function. Remote canister style reservoir comes with attached short 1" bracket, correct style cap, and mounting hardware. Fits...
1975-76 Buick Regal V8 350ci Remanufactured Power Steering Pump with Reservoir
If you're in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...
1961-74 GM, 1968-74 AMC, 1963-74 Mopar; Saginaw Type Power Steering Pump; without Reservoir; New
OER Authorized power steering pump for use with various 1961-74 AMC, GM, and Mopar models with a Saginaw style power steering pump. Each pump is manufactured to correct OEM standard of quality. This new power steering pump is...
1960-77 Power Steering Pulley Nut & Washer Set; for GM Models
Reproduction power steering pulley washer and nut for various 1960-77 GM models. This lock-nut and washer set is needed to secure the power steering pulley to the pump. Measures 9/16"- 18. {fitment}
1962-2002 AMC, Chrysler, Ford, GM; Saginaw Power Steering Pump Rebuild Set; 3/4" Shaft
This OER® power steering pump rebuild set designed for use with various AMC, Chrysler, GM, and Ford models that included a Saginaw power steering pump. This rebuild kit includes the essential parts needed to rebuild your...
5/16"-24 Grade 8 Hex Nut Zinc; Each
5/16"-24 Grade 8 hex nut in zinc & yellow finish. Sold individually. Product Specifications: Screw Size : 5/16-24 Across Flats : Hex Width: 7/16" Grade : 8 Finish : Zinc & Yellow Proof Load : 150000 Rockwell Hardness :...
1960-77 GM & Mopar; Saginaw Power Steering Fitting Adapter; 5/8"-18 to -6AN
This is the hose adapter fitting for Saginaw power steering gear box or pump. Straight, inverted flare zinc coated steel, 5/8"-18 to -6AN. Fits most Saginaw gear boxes or pumps 1960 through 1977 including Saginaw P series....
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is the chrome plated set...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Stud And Bolt Kit; Black Phosphate Coated Bolts
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is black phosphate...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Reservoir Installation Kit; Standard Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has unfinished hardware that are designed to be used with a...
1962-2002 GM, Chrysler, Plymouth, Dodge; Saginaw Power Steering Pump O-Ring Seal Kit
Reproduction of the O-rings for 1962-77 Saginaw power steering pumps. Includes 8 seals to replace the old or worn out originals for the pump to the reservoir. Does not include the shaft seal. Fits most Saginaw pumps through...
1962-2002 GM & Mopar; Saginaw; Power Steering Reservoir Installation Kit; Chrome Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has chrome hardware that are designed to be used with a chrome...