1956 & 1958 Chevy Bel Air, 150, 210, Impala, Biscayne; Rear Bumper to Body Seal Weatherstrip
Reproduction of the original rear bumper to body seal designed for 1956 and 1958 Chevrolet full size passenger car models. Each body seal is manufactured to factory specifications from molded EPDM rubber. {fitment}
Staple For Inner Fender Splash Apron, 1/2 inch
Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.
1955-90 Buick, Chevrolet, Pontiac, Oldsmobile; Door Lock Gasket; Each; Various Models
Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...
Reproduction weatherstrip clip receiver seal for 1958-71 GM models. These small plugs are inserted into the door and provide a mounting point for the door frame weatherstrip clips to insert into. Sold individually. 26...
1966-72 GM; Outer Mirror Mounting Set ; LH or RH ; Gasket, Bracket, Screws
Reproduction of the original style components required to replace and mount the outer door mirror on the door. Contains all the necessary hardware to install a standard outer door mirror onto either the drivers or passenger...
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
1966-72 Chevrolet; Standard Door Mirror Gasket
Quality reproduction outer door mirror gasket for various GM models. Manufactured to factory specifications in quality injection molded ABS, will fit original GM or reproduction mirrors. Installs between the mirror base and...
Correct reproduction of the original U-shape rubber molded weatherstrip seal originally installed on 1969-70 Buick, Chevy, Pontiac, and Oldsmobile Full Size hardtop & convertible passenger car models. This seal attaches to...
1963-65 Chevy; Door Mirror Gasket; LH or RH; Various Models
Quality reproduction of the original outer door mirror gasket designed for use on various GM models. Manufactured to factory specifications in quality injection molded ABS, will fit original GM or reproduction mirrors....
Reproduction of the original hood to cowl seal weatherstrip designed for use on 1991-96 Buick, Cadillac, Chevrolet, and Oldsmobile Full Size passenger car models. Each hood seal is manufactured from durable EPDM rubber in the...
1957-58 Chevrolet Bel Air, 150, 210, Nomad; Radiator Core Support Wiring Grommet
High-quality reproduction radiator core grommet designed for 1957-58 Chevrolet passenger car models. This grommet routes and protects the wiring harness as it passes through the radiator core support, preventing abrasion and...
1962-81 Trunk Lock Cylinder Gasket ; Die-Cut Replacement
Reproduction die-cut trunk lock cylinder gasket designed to seal the trunk lock cylinder to the body. This gasket is designed for use on the listings below. Each gasket will fit and function as original. This is a non-molded...
1958-75 Clutch Bellcrank Felt Seals ; Pair
OER® reproduction of the original die-cut felt seals that slips over the bellcrank pivot studs and seals against the end of the bellcrank tube to prevent dirt and water damage. Manufactured to correct dimensions. Sold in...
1961-64 Impala, 1961-62 Bel Air; U Shape Door Jamb Rubber Seals, with Screws; Pair
Correct reproduction of the of the original U-shaped rubber door jamb rubber seals designed for use on 1961-64 GM Impala 2 door hardtop models. Each U-shape seal is manufactured to original specifications including a steel...
1965-72 Chevrolet, Oldsmobile; Trunk Lock Cylinder Gasket; Molded Rubber; Various Models
Reproduction of the original trunk lock cylinder gasket designed for use on various GM models. This gasket is used to seal the trunk lock cylinder to the body. Manufactured in quality EPDM molded rubber that replicates the...
1967-68 Impala, Wildcat, Delta 88; Roof Rail Weatherstrip Seal, 2-Door Fastback; Pair
Reproduction of the original roof rail weatherstrip designed for use on 1967-68 Impala 2 door Fastback, Wildcat, Le Sabre, and various GM models as listed below. This quality reproduction weatherstripping is manufactured in...
Reproduction door frame weatherstrip set for Chevrolet Impala and other GM Full Size 2-door hardtop and convertible models. This reproduction is designed to replace the original exactly featuring the correct molded ends and...
Correct reproduction of the original roof rail weatherstrips designed for use on 1967-68 Impala and Full Size GM 2 door hardtop models. Eliminate water or other elements from entering the passenger area by replacing these...
1968-76 Remote Outer Door Mirror Gasket ; Various Models
Reproduction of the original outer door remote mirror mounting gasket for use with the various applications listed. Each gasket is manufactured to replicate the original is fitment and design. Can be used with the original...
1955-79 Outer Door Handle Push Button O-Ring Gasket ; Each
This door handle O-ring is one of the most overlooked replacement parts on any vehicle. The O-ring inserts onto the outer door handle push button and eliminates rattling and wear between the handle and the push button....
1966 Chevy Impala; Tail Lamp Lens to Housing Gaskets; RH & LH; Pair
Reproduction of the original die-cut rear tail lamp gaskets designed to replace the old or worn out originals on 1966 Impala models. These gaskets seal the tail light lens to the tail lamp housing assembly. Includes 6...
1966-1979 Camaro, Impala, Nova; Rubber Side Hood Bumper; Each
Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...
1962-78 Nova, Camaro, Firebird, Impala, Truck; Speedometer Cable Firewall Grommet; w/Steel Insert
Quality reproduction of the original speedometer cable firewall grommet designed for use on various 1962-73 Chevy II Nova, Camaro, Impala, Bel Air, Biscayne, Caprice, Firebird, and 1973-78 Chevrolet, GMC truck models as...
1954-1981 GM; Hood Adjustor Rubber Bumper & Stud; Various GM Cars & Trucks
Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...
1965-67 Impala, Bel Air, Biscayne, Caprice; Hood To Cowl Seal Weatherstrip
High quality reproduction of the original weatherstrip seal that attaches to the front cowl panel and seals the area between the hood and windshield. This reproduction is manufactured to exact configuration allowing the seal...
1963-64 Impala, Bel Air, Biscayne; Hood to Cowl Seal Weatherstrip Seal
Quality reproduction of the original hood to cowl weatherstrip seal that attaches to the cowl panel and seals the area between the hood and windshield. This correctly configured seal is manufactured to exact specifications...
1955-58 Buick, Cadillac, Chevy, Pontiac, Olds; Windshield Pillar Post Weatherstrip; Pair
Reproduction of the original pillar post weatherstripping designed for use on various 1955-58 Buick, Cadillac, Chevy, Pontiac, and Oldsmobile models including 1955-57 Bel Air and full size Chevrolets. Replacing the windshield...
Quality reproduction of the original weatherstripping designed for use on 1965-66 Impala, Caprice, Electra, Wildcat, Calais, DeVille, Bonneville, Catalina 4 door hardtop models. Each weatherstrip is manufactured with OEM type...
1982-98 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac; Door Jamb Switch Seal
Reproduction door jamb switch seal for the door jamb switch on a wide variety of GM models. Manufactured in rubber like the original, this accordian style seal prevent the elements from entering into the door jamb switch...
Reproduction of the original rubber stopper designed for use on the upper door section of the various GM models listed below. Each rubber stopper is manufactured to replicate the original in fitment and appearance. This...
1958-72 Buick, Chevy, Olds, Pontiac; Trunk Lid Rubber Stopper; Each; Various Models
Correct OER® reproduction of the original trunk lid rubber bumpers designed for use with various 1958-72 GM models. These rubber bumpers are engineered to replicate the factory originals in design, fit, and function. Each...
1966-70 Evaporator Case Drain Hose Rubber Seal - with AC
OER® reproduction of original evaporator case drain hose that attaches to the bottom portion of the evaporator core outlet case on various 1966-70 GM models originally equipped with air conditioning. Each drain hose is...
1955-60 Buick, Chevy, Olds, Pontiac; Hood to Cowl Seal; with Clips; Various Models
Reproduction of the original hood to cowl seal designed for use on various 1955-60 GM models. Includes the hood to cowl seal and installation clips. This seal will keep rain and dirt from entering your engine compartment. A...
1955-76 Chevrolet Bel Air, 150, 210, Impala, Caprice; Fender Skirt Rubber Seal ; 120" Long; OER
Reproduction fender or quarter panel skirt rubber seal for various 1955-76 Chevrolet models. Manufactured to correct dimensions from quality EDPM rubber that replicates the original in fitment and appearance. Measures 120"...
1958-64 Impala, Bel Air; Quarter Window Vertical Weatherstrip; 2 Door; Hardtop, Convertible
Reproduction of the original quarter window vertical weatherstripping designed for 1958-64 Impala, Bel Air, Electra, Le Sabre, El Dorado, and other Full Size GM models as listed. This high quality reproduction is manufactured...
1967-68 Chevrolet; Inner Fender Air Conditioning Hose Grommet; Various Models
Reproduction of the original AC hose grommet designed for use on 1967-68 GM models. Located on the RH front fender well, this hose grommet insulates the AC hoses from the condensor to the engine compartment. Manufactured in...
Reproduction of the original outer door handle and door lock gasket set designed to properly seal and protect the exterior door handle and lock areas on various vehicle models. Each gasket is precision die-cut to factory...