1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; RH Passenger Side; Various Models
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; LH Drivers Side; Various Models
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
1969-70 Chevrolet Impala Front End Rebuild Kit
1969-70 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...
1958-64 Impala; Lower Control Arms; Rubber Bushings; Pair
New stock style lower control arms designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and full size models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints...
1958-64 Impala, Bel Air, Biscayne; Front Disc Brake Spindles; 2" Drop; Pair
These 2" drop spindle are for use when you want to lower your disc brake converted car a full 2". The spindles are precision cast from high quality Ductile Iron, with 4140 Chrom-moly CNC machined pins and accepts factory...
1980-90 Impala, Caprice; Front Disc Brake Spindle Set; Reconditioned; Pair
Each reconditioned spindle set includes a LH and RH spindle that features a new outer bearing/race (#S34) which allows the spindle to be used with the 1973-77 GM 11" diameter rotor that came on mid-size GM vehicles with the 5...
1958-64 Impala, Bel Air, Biscayne; Front Tubular Lower Control Arms; Pair
These performance tubular lower control arms are designed to accept the standard coil spring, coil-over shocks or shocks with air bags. The arms are powder coated black and pre-assembled with our Del-a-lum bushings, billet...
1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1965-70 Impala, Caprice, Bel Air; Upper Tubular Control Arms; Pair
These tubular control arms are designed for maximum strength and visual impact. These upper arms are designed for stock replacement. All arms capture both sides of the bushing, unlike the originals that were only retained on...
1958-64 Impala, Bel Air, Biscayne; Front Tubular Upper Control Arms; Pair
Reproduction of the original upper tubular upper control arms designed for use with 1958-64 Impala, Bel Air, Biscayne, and Full Size Chevrolet models. These tubular style upper control arms change the way the car drives and...
Reproduction lower control arm bushings for 1955-64 Chevrolet Bel Air, Impala, Corvair, and Full Size models. Each bushing is manufactured to factory specifications. Add new life to your suspension by replacing the old...
1971-2005 GM; Lower Control Arm Bushing; Passenger Car and Truck; Varius Models; Each
Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or...
1958-62 Chevrolet Impala Front End Rebuild Kit
1958-62 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...
1965-68 Chevrolet Impala Front End Rebuild Kit
1965-68 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...
1971-72 Chevrolet Impala Front End Rebuild Kit
1971-72 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...
1973; Chevrolet Impala; Front End Rebuild Kit
1971-72 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...
1974-76; Chevrolet Impala; Front End Rebuild Kit
1974-76 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...
1958-64 Impala / Full Size Upper Control Arm; RH
This is a reproduction of the right hand upper control arm used on 1958-64 full size models. For left hand side use Part # A1000. Note: This is the control arm only, ball joints, bumpers, shafts and bushings are sold...
1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft Set
Reproduction of the original style upper control arm shafts for use with 1958-64 Impala, Bel Air, and Biscayne models. Set include shafts, bushings, washers and washer/bushing retainer bolts. {fitment}
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1958-64 Impala, Bel Air, Biscayne; Lower Control Arm Shaft; LH or RH
Quality reproduction of the lower control arm cross-shaft for use on various 1958-64 Chevrolet Impala, Bel Air, Biscayne, and 1963-82 Corvette models. Each control arm shaft is manufactured in quality stamped steel to...
1958-64 Impala, Bel Air, Biscayne; Upper Control Arms; Rubber Bushings; Pair
New stock style upper control arms designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and full size models. Includes both RH and LH upper control arms with cross shafts, bushings, and ball joints...
1965-70 Impala, Caprice, Bel Air; Lower Tubular Control Arms; Pair
These tubular control arms are designed for maximum strength and visual impact. These upper arms are designed for stock replacement. All arms capture both sides of the bushing, unlike the originals that were only retained on...
1955-70 Full Size Chevy; Upper Ball Joint; with Hardware; RH or LH
Reproduction of the original upper ball joint designed for use with 1955-70 Chevy full size models including 1955-57 Chevy, and 1958-70 Impala, Bel Air, Biscayne, and Caprice models. Control arm ball joints take a beating...
1958-82 Chevrolet; Lower Ball Joint with Hardware; Various Applications
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1970-05 GM Cars / Trucks; Lower Ball Joint (Standard Size); Thread: 9/16"
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1977-79; Chevrolet Impala; Front End Rebuild Kit
1977-79 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...
1980-96; Chevrolet Impala; Front End Rebuild Kit
1980-96 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1971-96 GM; Upper Control Arm Bushing; Various Models; Pair
Reproduction style upper control arm bushing designed for various 1971-96 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1958-64 Impala / Full Size Upper Control Arm; LH
This is a reproduction of the upper left hand control arm used on 1958-64 full size models. Note: This is the control arm only, ball joints, bumpers, shafts and bushings are sold separately. For rig ht hand side use Part #...
1958-64 Impala, Bel Air, Biscayne; Lower Control Arm Shafts; Set
Reproduction of the original style lower control arm shafts for use with 1958-64 Impala, Bel Air, Biscayne and full size Chevrolet models. Set include shafts, bushings, washers and washer/bushing retainer bolts. Sold in...
1970-96 GM Lower Control Arm Bumper, Each, Various Models
OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...
1977-96 GM; Upper Control Arm; With Shaft; RH
Replacement upper control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement upper control arm includes pre-installed bushings and ball...
1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft; Pair; LH and RH
Quality reproduction of the lower control arm cross-shafts for use on various 1958-64 Chevrolet Impala, Bel Air, and Biscayne models. Upper control arm shafts are manufactured in quality stamped steel to original factory...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1971-2005 GM; Lower Ball Joint; Thread: 5/8"; RH or LH; Each
Reproduction of the original style lower ball joint for a variety of 1971-2005 GM models as listed. Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving...
1970-05 GM Cars / Trucks; Lower Ball Joint (.0025 Oversize)
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1958-64 Impala; Bel Air; Biscayne; 1963-82 Corvette; Lower Control Arm Bumper
Replacing the control arm bumper can help bring the suspension back to factory original condition and keep it from bottoming out. {fitment}
1963-64 Chevrolet Impala Front End Rebuild Kit
1963-64 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...
1967-70 Impala/Full Size Passenger Car; Center Link
Reproduction drag link/center link for 1967-70 Chevrolet Impala/full size models as listed. Includes hardware. Full ball stud pitman arm end, greaseable, self aligning no bind design, low friction, and ready to install....
1961-75 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bumper; Each
Quality reproduction of the original upper control arm bumper designed for use with various 1967-75 General Motors models. Each bumper is manufactured in heavy duty EPDM molded rubber material to original specifications...
1965-70 Impala, Bel Air, Biscayne, Caprice; Lower Control Arm Bushing; Front; Each
Superb reproduction of the original control arm bushing reproduced to factory specifications. Add new life to your suspension by replacing the old bushings with these quality reproductions. Sold individually. 2 required per...
1973-76 Impala / GM Full Size Steering Center Link
Reproduction drag link for 1973-76 Chevrolet Impala and full size models. Includes hardware. Ready to install. This center link is made of hot-forged alloy steel for superior strength and is coated to help provide rust...
1955-74 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bushing; Each; Various Models
1958-1970 Chevrolet Biscayne 1958-1970 Chevrolet Bel Air 1966-1970 Chevrolet Caprice 1970-1972 Chevrolet Monte Carlo 1968-1968 Chevrolet Chevy II 1968-1974 Chevrolet Nova 1955-1957 Chevrolet Bel Air 1955-1957 Chevrolet One...
1966-74 Camaro, Nova, Impala, Caprice; Lower Control Arm Bushing; Each
Reproduction of the original control arm bushing designed for the lower control arm on various 1966-74 GM F-body, B-body, and X-body models. Manufactured in steel clad rubber to be pressed into place. If your suspension...
1962-70 Chevrolet; Pontiac; Control Arm Bumper; Rubber; Various Models
Reproduction of the original control arm bumper designed for use on various GM models. Each bumper is manufactured to factory specifications in the correct configuration and includes a built in stud ensuring a perfect fit....
1958-64 Tubular Control Arm Set - Black
Tubular control arms are designed for maximum strength and visual impact. These upper arms are designed for stock replacement. All arms capture both sides of the bushing, unlike the originals that were only retained on one...
1965-70 Tubular Control Arm Set - Black
Tubular control arms are designed for maximum strength and visual impact. These upper arms are designed for stock replacement. All arms capture both sides of the bushing, unlike the originals that were only retained on one...
1971-72 GM Full Size Passenger Car; Center Link
Reproduction drag link/center link for 1971-72 Chevrolet Impala and various other GM full size models as listed. Includes hardware. Full ball stud pitman arm end, greaseable, self aligning no bind design, low friction, and...
1961-1994 GM, Ford; Upper Control Arm Bushing; Front or Rear; Various Applications
Reproduction of the original control arm bushing designed for use on the the upper control arm for various 1961-1994 GM and Ford models. Manufactured in steel clad rubber that replicates the original control arm bushing in...
1971-2005 GM; Rear Lower Control Arm Bushing; Each; Various Models
Reproduction control arm bushing for the lower control arm on various 1971-2005 GM models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or going over...
Spindle Nut & Cotter Pin; 3/4"-20 With 1-1/16" Hex Head
3/4"-20 With 1-1/16" hex head spindle nut and plated 1/8" x 1-1/2" cotter pin for securing drum or rotor to spindle. Kit contains one nut and one cotter pin. 2 kits required per vehicle. {fitment}
1970-87 Buick, Chevrolet, Olds, Pontiac; Upper Control Arm Bumper; Various Models; Each
Reproduction control arm bumper for Buick, Chevrolet, Oldsmobile, and Pontiac models. This upper control arm bumper is designed to replicate the factory original and is essential for proper suspension travel and ride control....