Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
The most accurate reproduction fuel tank sending unit in the industry, with original design for an authentic fit and genuine appearance. Each sending unit includes the sender, gasket, filter, and float as original. This unit...
1961-64 Impala, Bel Air, Biscayne; Fuel Tank Mounting Brace; Each
Reproduction gas tank mounting brace for 1961-64 Impala, Bel Air, and Biscayne models. This brace attaches to the bottom of the trunk floor to support the gas tank. The gas tank mounting strap attaches to this brace....
1967-70 Impala, Bel Air, Biscayne, Caprice; Fuel Sending Unit; 3/8"; 0-90 ohm
Reproduction fuel sender for 1967-70 Impala, Bel Air, Biscayne, and Caprice models except station wagon models. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
Reproduction fuel tank sending unit for 1961-64 Chevrolet Impala. Bel Air, and Biscayne models except station wagon. Each fuel sending unit is manufactured in quality steel to resist corrosion within your fuel tank. Provides...
1961-64 Impala, Bel Air, Biscayne; Fuel Tank Sending Unit; 5/16"; Except Station Wagon
Reproduction fuel tank sending unit produced with original design for an authentic fit and genuine appearance. Each sending unit includes the sender, gasket, filter, and a brass float as original. This unit monitors the fuel...
Reproduction fuel tank sending unit for 1965-66 Chevrolet Impala, Bel Air, Biscayne, Caprice models and 1965-67 Chevelle, El Camino, Malibu and other GM A-Body and B-Body models with 5/16" line. The most accurate reproduction...
1964 Impala, Bel Air, Biscayne; Fuel Tank Filler Neck; Gray Primer; Except Station Wagon Models
Reproduction of the original fuel tank filler neck designed for use with 1964 Impala, Bel Air, and Biscayne models (except station wagons). Each neck is manufactured to factory dimensions and replaces the original exactly....
Reproduction of the original gas tank straps designed for use with 1967-1970 Chevrolet Impala, Bel Air, Biscayne, Caprice models (except station wagon). Each strap is manufactured in quality stainless steel with all correct...
Reproduction of the original fuel tank mounting straps designed for use with 1961-1964 Impala, Bel Air, and Biscayne models (except station wagon). Each strap is manufactured in quality stamped steel and galvanized for long...
Reproduction of the original style fuel tank mounting straps that fit various 1964-1966 Buick, Chevrolet, Pontiac, and Oldsmobile mid-size, and full size models as listed (except station wagon). Each strap is manufactured in...
1964 Impala, Bel Air, Biscayne; Fuel Tank Filler Grommet; Each
Reproduction of the original fuel tank filler grommet designed for use with 1964 Impala, Bel Air, Biscayne, 1964-67 El Camino, Chevelle, and Malibu station wagon models. Grommets are manufactured to correct dimensions...
Reproduction of the original style fuel tank mounting straps that fit various 1964-1966 Buick, Chevrolet, Pontiac, and Oldsmobile mid-size, and full size models as listed (except station wagon). Each strap is manufactured in...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
Reproduction of the original gas tank straps designed for use with 1959-1960 Chevrolet Bel Air, Impala, and Biscayne models. Each strap is manufactured in quality stainless steel with all correct contours for an authentic...
Reproduction of the original gas tank straps designed for use with 1958 Chevrolet Bel Air, Impala, and Biscayne models. Each strap is manufactured in quality stainless steel with all correct contours for an authentic fitment...
1968-70 Camaro, Firebird, Nova, Impala; Fuel Tank Vent Valve
Reproduction of the original gas tank vent valve that's installed on various 1968-70 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured in injection molded plastic to factory specifications. This commonly damaged...
Reproduction of the original fuel tank mounting straps designed for use with 1958 Impala, Bel Air, and Biscayne models with a 16 gallon fuel tank (except station wagon). Each strap is manufactured in quality stamped steel,...
Reproduction fuel tank mounting strap set for various 1977-1988 Buick, Chevrolet, Pontiac, and Oldsmobile full size models as listed (except station wagon). Each strap is manufactured in quality stamped steel, galvanized and...
Reproduction of the original fuel tank mounting straps designed for use with 1958 Impala, Bel Air, Biscayne, Brookwood, and Nomad station wagon models. Each strap is manufactured in quality stamped steel, galvanized and EDP...
1965-66 Impala, Bel Air, Biscayne, Caprice; Gas Tank Mounting Straps; Pair
Reproduction gas tank mounting straps for 1965-66 Chevrolet Impala, Bel Air, Biscayne, and Caprice models except station wagon models. Each strap is manufactured in quality stamped steel replicating the original configuration...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1955-70 Impala, Full Size; Fuel Tank Mounting Strap Hardware Set; 6-Pieces
Use proper mounting hardware to make your fuel tank installation job easier. This hardware set is the correct replacement fuel tank strap bolt set for 1955-70 full size Chevrolet models including 150, 210, Bel Air, Impala,...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1958-60 Impala, Bel Air, Biscayne; Fuel Tank Sending Unit; with 348 ci; 3/8" Inlet
Reproduction fuel tank sending unit for 1958-60 Chevrolet Impala and Full Size models with 348ci engines. Features the original design for an authentic fit and genuine appearance. Each sending unit includes the sender,...
1961-1963 Impala, Bel Air, Biscayne; Fuel Tank Filler Neck; Gray Primer; Except Station Wagon Models
Reproduction of the original style steel fuel tank filler neck designed for use with 1961-1963 Impala, Bel Air, and Biscayne models. Each filler neck assembly is manufactured in quality stamped steel and features a gray...
Reproduction of the original gas tank straps designed for use with 1961-64 Chevrolet Bel Air, Impala, and Biscayne (except station wagon) models. Each strap is manufactured in quality stainless steel with all correct contours...
1958-60 Impala, Bel Air, Biscayne; Fuel Tank Sending Unit; 5/16" Inlet; 6 or 8 Cyl.; Except 348 ci
Reproduction fuel tank sending unit for various 1958-60 Chevrolet Impala and Full Size hardtop and sedan models. Features the original design for an authentic fit and genuine appearance. Each sending unit includes the sender,...
1991-96 Impala, Caprice; Sedan; Fuel Filler Neck; with Fuel Cap; Except Station Wagon Models
Reproduction of the original style steel fuel tank filler neck designed for use with 1991-96 Caprice, Impala, Hearst Limousine, Buick Roadmaster and other GM full size models. Each filler neck assembly is manufactured in...
Reproduction of the original fuel tank mounting straps designed for use with 1967-1970 Impala, Bel Air, Biscayne, and Caprice models (except station wagon). Each strap is manufactured in quality stamped steel, galvanized and...
1961-64 Impala, Bel Air, Biscayne 6 Pass Station Wagon; Fuel Tank Sending Unit; with 5/16" Line
Reproduction of the original fuel tank sending unit designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne station wagon models with 5/16" line. Each sender is produced in quality steel to resist corrosion...
Reproduction fuel tank filler neck for 1969-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models except station wagons. This neck joins to the fuel tank with the filler neck rubber hose (available separately). Each...
Reproduction fuel tank sending unit for 1963-64 Impala, Bel Air, and Biscayne 409ci V8 models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge...
1958-60 Chevrolet; 6 Passenger Wagon, El Camino; Sedan Delivery; Fuel Sending Unit; with 3/8" Line
Reproduction fuel tank sender unit for 1958-60 Chevrolet 6-passenger station wagons, or 1959-60 El Camino models. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge...
Reproduction of the original gas tank straps designed for use with 1973-1978 Electra, LeSabre, Riviera, Impala, Bel Air, Caprice, Bonneville, Catalina, and other GM full size models (except station wagon). Each strap is...
1958-60 Chevrolet Station Wagon / El Camino; Fuel Sending Unit; With 5/16" Line
Reproduction fuel sender for 1958-60 Chevrolet full-size wagon or 1959-60 El Camino. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with the signal to indicate fuel...
Reproduction of the original fuel tank mounting straps designed for use with 1959-1960 Impala, Bel Air, and Biscayne models with a 16 gallon fuel tank (except station wagon). Each strap is manufactured in quality stamped...
Reproduction of the original fuel tank mounting straps designed for use with 1973-1978 Electra, LeSabre, Riviera, Impala, Bel Air, Caprice, Bonneville, Catalina, and other full size GM models (except station wagon). Each...
Reproduction of the original fuel tank mounting straps designed for use with 1958 Impala, Bel Air, Biscayne, Brookwood, and Nomad station wagon models. Each strap is manufactured in quality stamped steel, galvanized and EDP...
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
1974 Chevrolet Impala, Caprice, Bel Air; Fuel Tank Filler Neck; Except Station Wagon Models
Reproduction fuel tank filler neck for 1974 Bel Air, Impala, or Caprice models (except station wagon). Manufactured to factory specifications featuring the correct gas cap opening for proper fit, and functionality. Each...
1977-88 Buick, Chevy, Olds, Pontiac Full-Size; Fuel Tank Mounting Straps; w/24 Gallon Tank; Pair
Reproduction of the original fuel rank mounting straps designed for use with various 1977-78 GM full size models including Impala, Caprice, Electra, LeSabre, Bonneville, Catalina, and more. Each strap is manufactured in heavy...
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...
1962-81 GM; Fuel Tank Sending Unit Lock Ring; Small; 1-15/16"; Various Models
Correct reproduction fuel tank sending unit locking ring which secures the fuel tank sending unit to the gas tank. Replaces the original ring which are commonly destroyed when being removed. This ring helps to seal the...
1947-66 Chevrolet/GMC Truck; 1955-57 Bel Air, 150, 210; Fuel Tank Sending Unit Screw Set
Reproduction of the original fuel tank sending unit screws and washers designed for use with 1947-66 Chevrolet, GMC trucks, and 1955-57 Bel Air, 150, 210, and Nomad models as listed. Each set features 5 phillips head screws...
1991-96 Caprice, Impala, Full Size; NiTerne Fuel Tank Mounting Straps; OE Material; Pair
Reproduction of the original fuel rank mounting straps designed for use with various 1991-96 GM full size models including Impala, Caprice, Electra, and more. Each strap is manufactured in heavy dute preformed stamped steel...
Correct replacement gasket which is used between the sending unit and the locking ring. We recommend replacing the gasket any time the sending unit has been removed. Fits: 1967-90 models except wagon
1969-70 Impala/Full Size; Hose; For Fuel Tank Filler Neck; Nitrile 70 Shore; 2" ID x 5-1/2" Length
Reproduction fuel tank filler neck hose for 1969-70 full size Chevrolet cars including Impala, Bel Air, Biscayne, and Caprice models except wagon. This hose joins the fuel tank with the filler neck. Nitrile hose is...
1942-86 GM; Fuel Sending Unit Filter Strainer; for 3/8" Pickup Tube
Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....
Fuel Sending Unit Filter Strainer; For 5/16" Pickup Tube
Correct OER® reproduction of the original fuel tank float strainer designed for use with various 1942-85 GM, Chrysler, Dodge, Plymouth models as listed below. This filter will keep dirt and other elements from clogging or...
Reproduction of the original fuel tank sending unit designed for use with 1955-57 Chevy Bel Air, 150, 210, Nomad, and 1931-62 Chevy and GMC pickup truck models. Correct replacement of the original fuel tank sending unit...
1991-96 Impala/Caprice; Fuel Tank Neck Mount Set
Reproduction of the nut and bolt set used to attach the fuel tank filler neck to the rear panel on 1991-96 Chevrolet Caprice and 1994-96 Impala models. 4 piece set conists of 2 u-bolts and 2 bolts.
Hex Head Sems Screw; With Washer; A/AB Point; 6.3-1.81 x 25mm; Black Phosphate; Each
Reproduction black phosphate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 6.3-1.81 x 25mm...
Reproduction of the original style components necessary to Install the fuel tank sending unit for 1949-1966 Chevrolet, GMC pickup truck, Suburbans, and 1958-1960 Impala, Bel Air, Biscayne, and full size models as losted. This...
1961-81 GM; Fuel Tank Sending Unit Gasket; Small; 1-13/16 ID; Various Models
Correct replacement fuel tank sending unit gasket for various 1961-81 Buick, Chevrolet, Oldsmobile and Pontiac models. This gasket installs between the sending unit and the locking ring. Gasket is manufactured to correct...
Reproduction of the original style fuel sending unit lock ring and gasket for use with various 1962-1979 Buick, Chevrolet, Pontiac, and Oldsmobile models. Install the sending unit on your vehicle with a new sending unit lock...