1961-62 Chevrolet Impala, Bel Air, Biscayne; Rear Dummy Antenna Assembly; LH Drivers Side
Reproduction antenna assembly designed for use with 1961-62 Chevrolet Impala and full size models. Manufactured to factory specifications each piece is chrome plated, and includes correct mounting hardware to angle the...
1961-62 Chevrolet Impala, Bel Air, Biscayne; Rear Antenna Assembly; RH Passenger Side
Reproduction of the original rear antenna assembly for use with 1961-62 Chevrolet Impala and full size models. Manufactured to factory specifications each piece is chrome plated, and includes correct mounting hardware to...
1969-81 Chevrolet, GMC, Pontiac; AM/FM Antenna Mast; Non-Telescoping Fixed; Stainless Steel
Reproduction GM AM/FM non-telescopic stainless steel fixed front fender antenna mast for various GM models with an AM/FM radios including 1969 Camaro and Firebird models. Measures 30" non-retractable style round mast....
Universal HIDE-A-WAY Antenna AM/FM; OER Amplified Electronic
If you want great reception without a visible antenna, then the OER® Authorized Hide-a-Way amplified electronic antenna may be just what you need! A major breakthrough in antenna science, the OER® Authorized...
1962-64 Impala; Rear Seat Speaker Grill; 2 Door Hardtop; Convertible; GM Licensed
Quality reproduction of the original chrome rear seat speaker grill designed for use on 1962-64 Impala models. Each grill assembly is manufactured to original specifications offering a beautiful replica of the original...
New reproduction chrome radio faceplates are now available for 1965 Chevrolet models including Impala, Full Size, Chevelle, Malibu, and El Camino. The die-cast face is correct for AM/FM radios and includes the original style...
1965-67 Impala; Rear Seat Speaker Grill; GM Licensed
Quality reproduction of the original chrome center rear seat speaker grille designed for use on 1965-67 Impala models. Each grill assembly is manufactured to original factory specifications offering a beautiful replica of the...
1968-70 Camaro, Corvette, Impala; Radio Volume and Tuning Knobs; AM & AM/FM
OER® reproduction of the original volume and tuning control knobs designed for use with all 1968-70 factory original AM or AM/FM radios. Each knob is a perfect replication of the original. Manufactured in zinc die-cast...
1967-68 Camaro, Impala, Firebird Dash Radio Knobs ; Pair
Reproduction of the original volume control knob and tuner control knob radio knobs designed for use on various GM models including Camaro and Impala. Each knobs is manufactured in quality zinc die-cast metal and chrome...
1965-69 Impala, Camaro, Firebird: Convertible Speaker Bolt ; 4 Piece Set
Beautiful reproduction of the original rear speaker anchor bolt and screws designed for use on various 1965-69 GM convertible models. These special screws are used to mount the rear speakers, for use on models with rear...
1964-72 GM; Oval Front Dash Speaker; 4" x 10"; Four Bolt; 8 - 10 Ohms; Each
Reproduction 4" x 10" Oval 8-10 Ohm factory front dash speaker for various 1964-72 GM models. Each speaker is manufactured to original specifications featuring a cosmetically correct rectangular magnet and 4 bolt design for...
Repair the antenna mast and cable for the power antenna with this reproduction repair set. Works on various 1982-93 Buick, Chevrolet, Pontiac, and Oldsmobile models. Comes with the mast and cable. This is an upgraded service...
1967-68 In Dash Radio Knob Set ; Stereo ; 4 Piece Set ; Various Models
OER® reproduction of the original radio knob set designed for use on various 1967-68 Chevrolet models with a stereo radio. This radio knob set will replace the old or worn out original knobs on factory in-dash radios....
1970-81 Buick, Chevrolet, Pontiac, Oldsmobile; Rear Speaker Grille; With 4 Mounting Studs
Reproduction rear speaker grille for various 1970-81 Buick, Chevrolet, Pontiac, and Oldsmobile models including Camaro, Firebird, Impala, and Regal. Each grill is manufactured in stamped steel to correct factory...
1964-81 Buick, Chevy, Olds, Pontiac; Rear Seat Shelf Speaker Mounting Studs; 4 Piece Set
Reproduction of the original style rear seat shelf speaker mounting studs for use with various 1964-81 GM coupe and hardtop models. These studs have the correct spring clips used to keep tension on the stud when attached to...
Reproduction rear speaker grille for various GM, Ford, and Chrysler models including 1964-80 Buick, Chevrolet, Oldsmobile, Pontiac, Ford, Dodge, Plymouth. Fits Chevelle, Malibu, Impala, Caprice and Nova among other models....
1966-79 GM; Rear Speaker Grill; 5 1/2" x 9 1/2"; Various Models; Each
Reproduction rear speaker grill for various 1966-79 Buick, Chevrolet, Pontiac, and Oldsmobile models (except wagons). Each grill is manufactured in quality stamped steel, replicating the original design for an authentic...
1964-65 Chevy II Nova; Chevelle; Impala; Radio Tone/Fader Knobs; Die-Cast Chrome; Pair
Reproduction tone/fader radio knobs for 1964-65 Chevy II Nova, Chevelle and El Camino models, replacement style for Impala, Bel Air and Biscayne models. Each knob is manufactured in quality die-cast zinc replicating the...
1965-1975 Buick, Chevrolet, Pontiac, Oldsmobile, Radio Antenna Grounding Plate; Bronze; Front
Reproduction of the original radio antenna grounding plate for use with various 1965-75 GM models. Often referred to as a bezel or ring, this special bronze radio grounding plate mounts on the underside of the front fender...
1967-75 GM; Front Fender Mount Antenna Chrome Bezel ; Various Models
Reproduction of the original fender mounted chrome antenna bezel designed for use on various GM models. Manufactured in die-cast zinc to factory dimensions featuring brightly polished triple chrome plating. This chrome bezel...
OER® reproduction chrome antenna bezel nut designed for various 1965-81 GM models. Each bezel nut is manufactured in die-cast zinc and chrome plated, matches the original in appearance and functionality. Antenna hole in...
OER® reproduction of the original chrome antenna bezel nut designed for use with various 1967-72 GM models. Each bezel nut is manufactured in die-cast zinc metal and chrome plated and matches the original in appearance...
Universal-fit, service replacement antenna for classic or late model vehicles with power antenna option. Each motor is mounted directly to the mast assembly and is designed to mount with the universal-fit bracket and 160 inch...
1970 Chevrolet; Rear Speaker Grille; with 4 Mounting Studs; Various Models
Reproduction rear speaker grille for various GMmodels. Correct for 1970 Chevelle, Nova, Impala, Caprice and Monte Carlo. This speaker grill features straight sides and four built-in studs like the original. This is a...
Reproduction round ball telescopic antenna mast for various GM models from 1962-72 including GM trucks. This reproduction telescoping antenna mast is manufactured to original specifications with stainless steel material for...
Our Premium 5-1/2" round coaxial stereo speakers provide the ultimate audio quality in your classic car or truck. Speakers have 100 watts peak power capacity and a frequency response of 90-13KHZ. Ultra thin design makes this...
Premium Kick Panel Speakers; 4"; 70 Watts Peak Power; Pair
Our Premium 4" round stereo speakers provide the ultimate audio quality in your classic car or truck. Speakers have 70 watts peak power capacity and a frequency response of 100-13 KHZ. 2" deep design makes this speaker...
1962-77 GM Car, Truck; Front Dash Speaker; 4" x 10"; 8 -10 Ohms; Authentic Reproduction
Reproduction 4" x 10" rectangular factory style front dash speaker for various 1962-77 GM models. The GM factory began using this style of speaker in 1962. By 1968 this speaker design was commonly found in almost all GM...
1958-83 GM; Front In Dash / Rear Seat Shelf Speaker; 6" x 9"; 8-10 Ohms; Each
Reproduction 6" x 9" factory style 8-10 Ohm speaker for various 1958-83 GM models. This is an exact replica of the speaker installed by the GM factory in the dash and/or beneath the rear seat shelf, manufactured to original...
1967 Chevrolet Impala, Full Size; Radio Delete Plate; Black Pebble Grain With Chrome Edge
This is the radio delete plate wth the black pebble finish and chrome on the edge for 1967 Chevrolet Impala, Caprice and Bel Air. It can also be used on 1968 models. Sold individually. {specs} {fitment}
1969-70 Chevrolet Bel Air, Caprice, Impala; Radio Delete Plate Kit
Replacement radio delete plate for 1969-70 Chevrolet Bel Air, Caprice and Impala models. Injection molded like the OEM, black with chrome accents. Replaces GM part# 3948563. {specs} {fitment}
1968-70 Inner Radio Control Knobs ; Stereo ; Pair
OER® reproduction of the original tone and fader control knobs designed for use on various 1968-70 GM models. Each knob is manufactured in quality injection molded ABS plastic with a bright chrome finish. Note: For use...
1973-89 Buick, Cadillac, Chevy, Pontiac, Oldsmobile; Rear Speaker Enclosure Retainer; Each
Reproduction of the original enclosed speaker retainer for use with various 1973-89 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models. This is the spring steel retainer that attaches the rear speaker enclosure on...
1971-78 Chevrolet, Pontiac, Oldsmobile; Radio Control Knobs; Volume and Tuning; Pair
Reproduction volume and tuning control knobs for 1971-78 General Motors factory radios. Each knob features the correct radio tuning symbol and music note markings as shown. Manufactured in injection molded ABS with correct...
Reproduction of the original 4" x 6" front kick panel speaker and in-dash speaker for various 1965-93 GM models with a factory 4-speaker stereo system that requires a 8-10 OHM speaker. Each speaker is manufactured to the...
1968-70 Inner Radio Control Knobs ; Mono ; Pair
OER® reproduction of the original tone and fader control knobs designed for use on various 1968-70 GM models. Each knob is manufactured in quality injection molded ABS plastic with a bright chrome finish. Note: For use...
Radio Installation Nuts; 7/16"-28 thread x 1/8" thick; Pair
Correct mounting nuts used to hold the radio in place on most GM applications. Fits radios that use 7/16"-28 thread x 1/8" thick flat style hex nuts.
1967-68 In Dash Radio Knob Set ; Mono ; 4 Piece Set ; Various Models
OER® reproduction of the original radio knob set designed for use on various 1967-68 Chevrolet models with a mono radio. This radio knob set will replace the old or worn out original knobs on factory in-dash radios. Knobs...
OER® reproduction of the original radio control knobs for the Tone and Fader controls. For use with original AM and AM/FM in dash radios without stereo or rear speaker option. Manufactured to factory dimensions in...
1965-66 Impala, Bel Air, Chevy II Nova; Chevelle; Radio Knobs; Die-Cast Chrome; Pair
Reproduction outer radio knobs for 1965-66 Impala, Bel Air, Biscayne, Chevy II Nova, Chevelle, and El Camino models. Each knob is manufactured in quality die-cast zinc replicating the original design, appearance, and fitment....
OER® reproduction of the original radio control knobs for the Tone and Fader controls. For use with original AM and AM/FM in dash radios with stereo or rear speaker option. Manufactured to factory dimensions in injection...
1955-91 GM; Molded Fender Antenna Gasket; with Manual Antenna; 1-1/2" OD 1-1/16" ID; Various Models
Correct OER® reproduction of the original style antenna gasket found on a variety of GM vehicles equipped with fender mount AM or AM/FM manual antennas. Each gasket is manufactured to OE specifications and replaces the...
1965-72 GM; Kick Panel Speaker Grills; 6" x 9"; Pair
Speaker grills are for use with 1965-72 Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile models as listed. Exact duplicate of the original factory installed 6" x 9" speaker grill. Manufactured in natural steel. Sold in...
1967-69 Camaro, Firebird; 1969-1972 GM Trucks; Front Antenna Cable; AM / FM ; 49-1/2"
Replace your worn out antenna body and cable with this quality reproduction antenna cable assembly designed to fit the applications listed below. For use with AM or AM/FM antennas with a plug in/nut retained style mast....
1969-96 GM Car & Truck; Antenna Bezel Nut; Chrome; 11/16" ID; Various Models
Reproduction of the original chrome flat style (non-domed) bezel nut designed for use on various 1969-96 GM models. This chrome antenna bezel nut is manufactured in zinc die-cast metal and chrome plated to a lusterous shine....
1969-70 Camaro, Impala, Caprice, Nova; Dash Knob Set ; with Mono Radio; GM Licensed
Reproduction of the original dash knobs designed for use on various 1969-70 Chevrolet models. This complete dash knob set will replace the old or worn out original knobs and help bring your dash back to a factory fresh...
1969-70 Chevrolet; Dash Knob Set ; with Stereo Radio; GM Licensed
Reproduction of the original dash knobs designed for use on various 1969-70 Chevrolet models. This complete dash knob set will replace the old or worn out original knobs and help bring your dash back to a factory fresh...
1970-92 Buick, Chevrolet, Pontiac, Oldsmobile; Antenna Cable with Windshield Antenna; Various Models
OER reproduction of the original radio antenna cable designed for various GM models including 1970-92 Camaros and Firebirds with a built in windshield antenna. This antenna cable is manufactured with stamped steel ends for an...