Product#: 7828871

1959-79 AMC, GM, Ford, Dodge, Plymouth; Steering Coupler; with Power Steering; 13/16"-36 Spline; Various Models

OER® Authorized reproduction steering coupler found on various models. Each coupler replicates the original in every detail. A worn out steering coupling joint will cause your vehicle's steering to become loose or...


Product#: 8270149AC

GM 140 Steering Gear Box; Vega Style; Manual: 20:1 Ratio; 5 Turns Lock-To-Lock; Chrome

The Saginaw 140 manual steering gear box is a favorite among hot rodders, street rodders and racers alike. In production during a 7-year span from 1971-1977, the 140 gear box has a number of favorable attributes, including...


Product#: 8270149A

GM 140 Steering Gear Box; Vega Style; Manual: 20:1 Ratio; 5 Turns Lock-To-Lock; Black

The Saginaw 140 manual steering gear box is a favorite among hot rodders, street rodders and racers alike. In production during a 7-year span from 1971-1977, the 140 gear box has a number of favorable attributes, including...


Product#: 71350

3/8" X 48" Power Steering Return Hose; Without Fittings; Cut to Fit

A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...


Product#: 7834183

1961-99 GM, Chrysler, Dodge Plymouth; Saginaw Power Steering Pump Cap

Reproduction of the power steering pump cap designed for use with a variety of 1961-2005 GM, and Chrysler, Dodge, Plymouth models that included a Saginaw power steering pump. Each cap is manufactured in quality injection...


Product#: 1253580

1960-77 GM, Chrysler, Dodge, Plymouth; Power Steering Fitting; with Saginaw PS Pump; Cad Plated; Various Models

Reproduction of the original style power steeing pump fitting for use with various 1960-77 Chrysler, Dodge, Plymouth, and GM models as listed. Many Saginaw power steering pumps with a female style fitting require an adapter...


Product#: 70518

1965-81 Buick, Chevy, Olds, Pontiac; Power Steering Return Hose

Reproduction of the original power steering return hose for use with various 1971-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each hose is manufactured to specific factory dimensions replicating the original in...


Product#: 71224

3/8" x 24" Power Steering Return Hose; Without Fittings; Cut to Fit

Service replacement power steering hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn out or cracked power...


Product#: ES409R

1971-97 Chevy, GMC C10, Blazer, Suburban; Outer Tie Rod End; 2WD; RH or LH; Each

Reproduction of the original outer tie-rod end designed for use with various 1971-97 Chevrolet and GMC truck models with 2-wheel drive. Restores vehicle handling, and OE alignment. Reduces tire wear, and improves steering...


Product#: 18732

1968-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban, Van; Pitman Arm; with Power Steering; 2 Wheel Drive

Quality reproduction pitman arm for various 1968-72 Chevrolet and GMC light truck applications. This hard-to-find steering linkage component is ideal for rebuilding your stock steering system. Improves steering response;...


Product#: ES409L

1971-99 Chevrolet, GMC C10, Blazer, Suburban; Inner Tie Rod End; 2 WD; RH or LH

Reproduction of the original tie-rod end designed for use with various 2-wheel drive Chevrolet and GMC truck models. Restores vehicle handling, and OE alignment. Reduces tire wear, and improves steering response. Each tie-rod...


Product#: 153623

1969-89 Chevrolet, GMC Truck; Pitman Arm; 2WD; with Manual Steering

Reproduction of the original pitman arm designed for use with various 1969-89 Chevrolet and GMC trucks. Each pitman arm is manufactured in heavy duty cast iron replicating the original in design, appearance and fitment. Is...


Product#: 1253532

1978-2006 Power Steering Pump Supply Hose Fitting; Metric; O-ring Style

Power steering pump supply hose fitting for 1978-2006 Saginaw power steering pumps requiring a metric style fitting with the o-ring style seal. This fitting is necessary to mount the cover to the pump and connects to the...


Product#: ES681N

1964-77 GM; Inner Tie Rod End; RH or LH; Various Models; ES681N

Reproduction of the original inner tie-rod end designed for use with various 1964-77 Buick, Chevrolet, GMC, Oldsmobile, and Pontiac models. Restores vehicle handling, and OE alignment. Reduces tire wear, and improves steering...


Product#: NP6084

1961-72 Chevy, Buick, Olds; Power Steering Pump; with Reservoir; 6 & 8 Cyl. 198, 215, 283, 327; New

If you're looking for a power steering pump for your classic vehicle and are finding that your part has become obsolete and cores for reman units are unavailable, you can now replace that obsolete pump with a brand-new...


Product#: 7818568

1970-91 AMC, GM, Chrysler, Ford; Steering Coupler; for 3/4" Shaft; 30 Spline; 3-1/4" Diameter; Various Models

Reproduction steering coupling joint for a variety of AMC, GM, Chrysler, Dodge, Plymouth, and Ford models as listed. This coupler (rag joint) is required to connect the steering column to the steering box. {specs} AMC models:...


Product#: 1253515

1959-77 Chevrolet, Buick, Cadillac, Oldsmobile, Pontiac; Tie Rod End Dust Boot Set; GM Vehicles; Set of Four

Reproduction tie rod end dust boots with OE part number on the boots. Tie rod end dust boots measure approximately 1-3/16" on bottom, 1-1/4" on top & 1/2" hole. Sold as a set of 4. Fit a wide variety of 1959 & later GM makes...


Product#: 71236

Power Steering Return Hose; 3/8" I.D. X 36"; Cut to Fit

Reproduction of the original style power steering return hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn...


Product#: 1253531

1963-77 Power Steering Pump Supply Hose Fitting; SAE; Inverted Flare Style

Power steering pump supply hose fitting for 1977 and older Saginaw pumps requiring an SAE style fitting with the inverted flare. This fitting is necessary to mount the cover to the pump and connects to the supply pressure...