OER® reproduction of the original style rubber bumper designed for use with various GM applications. Each rubber stopper is manufactured to correct specifications in EPDM rubber ensuring long lasting quality. Will fit...
1937-80 GM, 1961-64 Impala, 1964-72 El Camino; Gas Door Bumpers; 1937-58 1-prong Door Bumpers; Pair
Correct reproduction rubber bumper for various GM applications. Fits: 1937-1958 GM full size vehicle door bumper, single prong style, front or rear. 1961-64 full size and 1964-72 El Camino gas filler door. Keeps the door from...
Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each
Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.
1958-59 Impala, Bel Air, Biscayne, El Camino; Rear Gas Filler Door Bumpers; Pair
Correct reproduction of the original gas filler door rubber bumper for use with 1958-59 Impala, Bel Air, Biscayne, and El Camino models. Each bumper is manufactured in EPDM rubber to original factory specifications. Keeps the...
1958-84 GM; Outer Rear Hood Rubber Stoppers; Pair; Various Models
Reproduction outer rear hood bumpers for various GM models. Each bumper is manufactured to quality EPDM rubber compound and matches the original in dimensions allowing proper fitment. Sold in pairs. Use as required Buick...
1959-79 Buick, Chevy, Pontiac, Oldsmobile; Seat Back Bumper; Oval Style; Each; Various Models
Reproduction of the original oval style seat back bumper designed for use on various 1959-79 GM vehicles. Each bumper is manufactured in hard rubber including a steel core for added strength. The bumper is installed where the...
1955-57 Chevy Bel Air, 150, 210, Nomad; Upper Trunk lid, 1955-59 Rear License Plate Bumpers; Pair
Correct reproduction of the rubber bumper for the upper trunk on 1955-57 Chevrolet Bel Air, 150, 210, Nomad cars and the rear license plate on all 1955-59 Impala. Bel Air, Biscayne, El Camino, and station wagon models. Sold...
1982-04 GM; Hood Adjustment Rubber Bumper & Bolt; 1" Diameter; Each; Various Models
Replace your original rubber hood adjuster stoppers with a correctly configured reproduction hood adjustment bumper. This part replace the adjuster bolt and the rubber bumper for a complete bolt-on replacement of the...
1959-61 Impala, Bel Air, Biscayne; Hood Side Rubber Bumpers; Pair
Reproduction hood rubber bumpers for 1959-61 full size Chevrolet cars including Impala and Bel Air models. Designed to help keep your hood aligned and in the correct position. Each bumper duplicates the original and fits...
1959 Impala, Bel Air, Biscayne, Station Wagons; Hood To Grill Bumpers; Pair
Original style hood to grill rubber bumper for use on 1959 Chevrolet Impala, Bel Air, Biscayne, El Camino, and station wagon models. Manufactured using quality EPDM rubber, these bumpers are designed to keep the hood from...
1970-77 Chevrolet El Camino, Monte Carlo, 1970-73 Chevelle; Hood Stop Stud; Pair
New hood stop studs for 1970-73 Chevrolet Chevelle and 1970-77 Monte Carlo that mount on cowl firewall. 2 are used per car. These lock the hood in back. Sold as pair only. These have the special head with "C".
1960-61 Impala / Full Size Rear License Plate Bumpers - Pair
Correct reproduction rubber bumper for the rear license plate on 1960-61 full size Chevrolet cars including Impala, Bel Air and El Camino models. Sold as a pair.
1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models
Reproduction hood adjustment bumpers for various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated, or lost originals. Allows for a...
1958-77 Buick, Chevy, Olds, Pontiac; Hood Adjust Bumper and Screw Set; Various Models
Reproduction hood adjustment bumpers for various 1958-77 GM models including 1967-69 Camaro and Firebird models. These 7/8" OD reproduction stoppers and screws are manufactured to original specifications to replace the worn...
1955-1976 Glove Box Door Arm Rubber Stopper
Reproduction of the original glove box door arm rubber stopper designed for use on various GM models. Eliminate the rattling and looseness of the glove box door by simply replacing the worn out or missing rubber glove box...
1980-2016 GM; Outer Hood Adjust Rubber Bumper; Each; Various Models
Reproduction of the original molded rubber hood adjustment bumper located on the outer hood for various 1980-2002 GM models. This reproduction molded rubber bumper is manufactured to original specifications for an authentic...
1955-1981 GM; Firewall Pad Fastener; Each
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
1964-72 Chevrolet, Pontiac; Lower Control Arm Bumper; Each; Various Models
Reproduction of the original lower control arm bumper designed for use on various GM vehicles including 1968-1969 Camaro and Firebird models. Each bumper is manufactured from durable hard rubber and features the correct...
1962-66 Chevrolet; Door Rubber Bumper Set; 4 Piece Set; Various Models
Replacing the rubber door stoppers will help keep your doors aligned correctly while adding a factory fresh appearance to the vehicle. Each rubber bumper is designed and manufactured to exact OE specs. Manufactured in quality...
1962-81 GM; Glove Box Door Arm Rubber Bumper
OER® reproduction of the original glove box door arm rubber bumper designed for use with various 1962-81 GM models. This rubber bumper is manufactured in EPDM rubber to the original factory configuration. Was installed on...
1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each
Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...
Reproduction rubber bumper for various GM applications. Each bumper is manufactured in EPDM rubber to factory specifications replicating the original in design and fitment. This bumper was used for various applications...
1966-1979 Camaro, Impala, Nova; Rubber Side Hood Bumper; Each
Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...
1938-91 GM; Consol & Glove Box Rubber Stoppers; Fits 1/4" Hole; Pair
Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...
1954-1981 GM; Hood Adjustor Rubber Bumper & Stud; Various GM Cars & Trucks
Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...
1970-90 GM; Lower Door Window Stop Bumper; Each; Various Models
Correct reproduction rubber stop bumper designed to keep the door glass from rolling down beyond the required travel point. Each stopper is manufactures from quality EPDM rubber and features a press fit retaining tab for easy...
1968-96 Impala, Chevelle, Corvette; Hood Rear Panel Bumper, Each, Various Models
Reproduction of the original rear hood panel bumper designed for use on various 1968-96 GM models. Exact reproduction of the original rear hood bumper used to replace the worn out or missing original. Manufactured to exact...
1973-81 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Bumpers; 8 Piece Set
Reproduction of the original hood bumpers for 1973-81 Chevrolet & GMC pickup, Blazer, Jimmy, and Suburban models. Manufactured in quality EPDM rubber to factory dimensions for an authentic appearance and fitment. Set...