Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
Reproduction of the original outer door mirror designed for use with various 1967-72 Chevrolet models. Each mirror is manufactured from durable die-cast zinc and finished to match factory specifications for a precise fit and...
Reproduction of the original outer door mirror designed for use with various 1968-72 GM models. Each mirror is precision-manufactured in high-quality die-cast zinc, replicating the original design, fit, and finish for an...
1962-1977 GM; Windshield Washer Jar Bracket; Various Models
OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...
1962-72 Chevrolet/Pontiac; OE Style Firewall Pad Fastener; Plastic; 7/16" X 1.50"; Various Models
Correct reproduction plastic firewall pad fastener for various GM models including 1967-69 Camaro, 1967-69 Firebird, 1962-72 Nova and 1962-69 Impala models. These fasteners are required to allow the firewall pad to attach...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
Reproduction of the original outer door mirror designed for use with various 1966-74 GM models. Each mirror is manufactured in premium die-cast zinc with a high-quality chrome-plated finish for an authentic OE-correct...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1965-69 Impala, Camaro, Nova, Firebird; Hood Hinge; LH; Driver Side
Reproduction of the original hood hinge assembly designed for various GM models. Each hood hinge is manufactured from stamped steel assuring a quality replacement. We recommend replacing the hood spring when installing a new...
1959 Impala, Bel Air, Biscayne, El Camino; Front Bumper; 2-Piece Set
Reproduction of the original front bumper designed for use on 1959 Chevrolet Impala, Biscayne, Bel Air and El Camino models. This reproduction bumper is manufactured to exact factory specifications featuring a beautifully...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1966-1967 Camaro, Nova, Impala, Corvair; Remote Door Mirror Assembly; LH Driver Side; Various Models
Reproduction remote outer door mirror for various GM applications. Cable-operated design recreates the factory interior-controlled mirror for safer, hands-on-the-wheel adjustments. Built in quality zinc die-cast metal with a...
1969-72 El Camino; 1971-72 Sprint; Tailgate Shell; Replaces GM#"s 8728837, 8761259, 9862703
This tailgate shell assembly is a high quality reproduction part built to replace the original tailgate on 1969-72 El Camino and 1971-72 GMC Sprint models. Each tailgate shell is manufactured to factory specifications...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1959-60 GM Full-Size Windshield; Various Makes/Models; With Gray Shade
Replacing your original damaged or missing windshield glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the...
OER® reproduction of the original style 18" Trico windshield wiper blades designed to fit 3/16" side-lock connector arms. This blade is an exact reproduction for various GM models including 1970-81 Camaro, Firebird,...
1963-67 Chevrolet, Oldsmobile, Pontiac; Hood Hinge Assembly; RH Passenger Side
Reproduction hood hinge assembly for various 1963-67 GM models. Each hood hinge is manufactured from stamped steel to factory specifications assuring a quality replacement. Features correct mounting points for ease of...
Reproduction chrome rear bumper for 1966 El Camino and Chevelle station wagon models. Each chrome bumper is manufactured to factory specifications and replicates the original in every detail. This reproduction bumper will fit...
1959-60 El Camino; Back Glass; Light Green Tint
Replacing your original damaged or missing back glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the windows of...
1969 Chevrolet Chevelle, El Camino; Front Bumper Chrome; Replaces GM# 3926850
Reproduction chrome front bumper for 1969 Chevrolet Chevelle or El Camino models. Each bumper is manufactured to original specifications and replicates the original in every detail. This reproduction bumper will fit and...
1966 Chevelle, Malibu, El Camino; Front Bumper; Chrome: Replaces GM# 3869723
Reproduction chrome front bumper for 1966 Chevrolet Chevelle or El Camino models. Each bumper is manufactured to original specifications and replicates the original in every detail. This reproduction bumper will fit and...
1967 Chevelle, Malibu, El Camino; Front Bumper; Chrome; Replaces GM# 3884920
Reproduction chrome front bumper for 1967 Chevrolet Chevelle or El Camino models. Each bumper is manufactured to original specifications and replicates the original in every detail. This reproduction bumper will fit and...
Reproduction rear bumper for 1978-87 Chevrolet El Camino and GMC Caballero, and 1978-83 Chevrolet Malibu Station Wagon models without impact strips. Manufactured in stamped steel to factory specifications, this bumper...
Reproduction chrome rear bumper for 1968-72 El Camino, 1971-72 GMC Spriint and 1968 Chevelle station wagon models. Each chrome bumper is manufactured to factory specifications and replicates the original in every detail. This...
1965 Chevelle, El Camino, Malibu; Rear Bumper; Chrome; Replaces GM# 3858438
Reproduction chrome rear bumper for 1965 Chevrolet Chevelle, Malibu, or El Camino models. Each bumper is manufactured to original specifications and replicates the original in every detail. This reproduction bumper will fit...
1965 Chevelle, El Camino, Malibu; Front Bumper; Chrome; Replaces GM# 3856906
Reproduction chrome front bumper for 1965 Chevrolet Chevelle, Malibu, or El Camino models. Each bumper is manufactured to original specifications and replicates the original in every detail. This reproduction bumper will fit...
Reproduction of the original outer door remote mirror assembly designed for the driver side of various GM models. Each mirror is precision manufactured from high-quality zinc die-cast metal and replicates the original factory...
1966-67 Camaro, Firebird, Chevelle, GTO; Lower Door Hinge; LH; Drivers Side; Various Models
OER® reproduction of the original lower door hinge designed for use on various 1966-67 GM models. Each hinge is manufactured from heavy-duty cast material, accurately replicating the original in both quality and design....
1973-77 Chevrolet Malibu, Chevelle, El Camino; Fender Liner; Plastic; Pair
Replacement inner fender liner skirts for 1973-77 Chevrolet Malibu, El Camino and 1973-74 Chevelle models. These are the liners that mount in the front fender well. Replace the cracked, missing or warped fender liners today....
1978-87 Chevrolet, Oldsmobile, Pontiac A, G-Body; Body Mount Bushings; 22-Piece Set
Reproduction 22 piece body mount bushing set for various 1978-88 Chevrolet, Oldsmobile, and Pontiac A-Body and G-Body models. Manufactured to factory specifications for proper fitment and function. These kits are made out of...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
1968-72 Chevrolet Chevelle, El Camino; Front Inner Fender Skirts; Plastic; LH and RH
Reproduction plastic inner fender wells/skirts for 1968-72 Chevrolet Chevelle and El Camino models. Made in correct black semi-gloss ABS plastic and have a similar finish to the OEM. Sold in pairs. Made in USA
Reproduction of the original hood hinge assembly designed for use on various 1968-79 GM models. Each hood hinge is manufactured from heavy duty stamped steel assuring a quality replacement. We recommend replacing the hood...
Brand New Reproduction wiper motor built using the industry's most advanced engineering technology. Core shortages and low availability have made our brand new replacement wiper motors the high quality, low cost alternative...
OER reproduction of the original front windshield glass for use with 1968-72 Buick, Chevrolet, Pontiac, and Oldsmobile A-Body 2 door coupe models. This windshield is manufactured with tempered laminate safety glass that meets...
1973-77 Regal; Cutlass; Monte Carlo; El Camino; LeMans; Body Mount Bushing Set; 28 Piece Set
Reproduction 28 piece body mount bushing set for various 1973-1977 GM models. Each bushing is manufactured to factory specifications to ensure proper fitment, alignment, and long term performance. These high quality kits are...
1959-60 Impala, Bel Air, Biscayne; Outer Door Mirror; Chrome; with Gasket & Installation Hardware
Correct reproduction outer door mirror for 1959-1960 Chevrolet Impala, Bel Air, Biscayne, El Camino, and related full-size passenger models. Manufactured in quality die-cast zinc and chrome plated to replicate the original in...
Reproduction of the original front windshield glass for use with 1978-88 Buick, Chevy, Pontiac, Oldsmobile G-Body models as listed. This windshield is manufactured with tempered laminate safety glass that meets the standard...
1964-67 Chevrolet El Camino; Back Glass; Smoke Gray Tint
Reproduction back window glass for 1964-67 Chevrolet El Camino models. Replace scratched or damaged original with this OEM quality replacement. Each glass is professionally packed with extra care to prevent damage during...
1955-60 Bel Air, El Camino, Impala, Corvette; Door Latch Striker Plates; Pair
Reproduction of the original door striker plates designed for use with 1955-60 Chevrolet Bel Air, 150, 210, Nomad, Impala, Biscayne, Corvette, and El Camino models. Each striker plate is manufactured from high quality zinc...
Brand New Reproduction wiper motor built using the industry's most advanced engineering technology. Core shortages and low availability have made our brand new replacement wiper motors the high quality, low cost alternative...
1969 Chevelle, El Camino, Impala, Bel Air, Biscayne; Hood Hinge and Spring Assemblies; LH and RH
Reproduction hood hinge and spring assemblies for 1969 Chevelle, El Camino, Impala, Bel Air, and Biscayne models. Manufactured in stamped steel to factory specifications, these assemblies restore proper hood alignment and...
1964 Chevelle, Malibu, El Camino; Front Bumper Bracket Set; 4-Pieces
Reproduction front bumper bracket set for 1964 Chevrolet Chevelle, Malibu, and El Camino models. Manufactured in stamped steel to factory specifications, each bracket replicates the original design for proper fit, strength,...
1965 Chevelle, Malibu, El Camino; Front Bumper Bracket Set; 4-Pieces
Reproduction front bumper bracket set for 1965 Chevrolet Chevelle, Malibu, and El Camino models. Manufactured in stamped steel to factory specifications, each bracket replicates the original design for proper fit, strength,...
1964-66 El Camino; Tailgate Skin; Replaces GM# 4883711
This tailgate skin is a high quality reproduction part built to replace the original outer tailgate panel on 1964-66 El Camino models. Each tailgate skin is manufactured to factory specifications featuring the correct...
1966 Chevrolet Chevelle, Malibu, El Camino; Front Inner Fender Skirt; RH; Replaces GM# 3872138
Reproduction inner front fender skirt for 1966 Chevelle, Malibu, and El Camino models. Each fender skirt panel is manufactured to correct factory specifications and replaces the rusted or damage original unit exactly....
1966 Chevrolet Chevelle, Malibu, El Camino; Front Inner Fender Skirt; LH; Replaces GM# 3872137
Reproduction inner front fender skirt for 1966 Chevelle, Malibu, and El Camino models. Each fender skirt panel is manufactured to correct factory specifications and replaces the rusted or damage original unit exactly....
Reproduction hinge pillar to rocker panel reinforcement panels for 1968-72 Chevelle, El Camino, 1970-72 Monte Carlo and 1971-72 GMC Sprint models. Each panel is manufactured from quality stamped steel to factory...
1965 Chevelle, El Camino, Malibu; Front Inner Fender Skirt; RH; Replaces GM# 3864324
Reproduction front fender skirt for 1965 Chevelle, Malibu, and El Camino. One of the most critical, and important sheet metal panels is the front fender skirt. Because of the location of this panel, they commonly rust and...
1965 Chevelle, El Camino, Malibu; Front Inner Fender Skirt; LH; Replaces GM# 3856893
Reproduction front fender skirt for 1965 Chevelle, Malibu, and El Camino. One of the most critical, and important sheet metal panels is the front fender skirt. Because of the location of this panel, they commonly rust and...
Correctly reproduced glass windshield washer bottle that was common in various 1955-72 General Motors vehicles. Each bottle is manufactured in the correct factory configuration that replaces the old or missing original...
1963-67 Buick, Chevrolet, Oldsmobile, Pontiac; Windshield Wiper Motor; 2-Speed; 3-Terminal
Replacement wiper motor built using the industry's most advanced engineering technology. Our replacement wiper motors are the high quality, low cost alternative to brand name motors. Note: Wiper motors do not include the...
1963-69 Buick, Chevrolet, GMC, Oldsmobile, Pontiac; Windshield Wiper Motor; 1 Speed; Brand New
Brand New Reproduction wiper motor built using the industry's most advanced engineering technology. Core shortages and low availability have made our brand new replacement wiper motors the high quality, low cost alternative...
Upgrade your classic with this brand new reproduction wiper motor, engineered using the latest advancements in automotive technology. Designed as a high-quality, cost-effective alternative to hard-to-find NOS, used, or...
1971-72 Chevelle, El Camino; Front Bumper Guards; Chrome with Inserts; LH and RH
Reproduction front bumper guards for 1971-72 Chevrolet Chevelle and El Camino models. Each guard is manufactured in stamped steel and finished in high-quality chrome plating with the correct rubber insert for OE authenticity....
1967 El Camino; Tailgate Skin; Replaces GM# 7661700
This tailgate skin is a high quality reproduction part built to replace the original outer tailgate panel on 1967 El Camino models. Each tailgate skin is manufactured to factory specifications featuring the correct contours...