1958-82 GM; Power Steering Control Valve; New, Not Rebuilt
Upgrade or restore your classic GM power steering system with this reproduction power steering control valve, designed for 1958-64 Chevrolet Impala, Bel Air, Biscayne, 1960-68 Chevrolet and GMC trucks, 1963-82 Corvette, and...
1956-80 GM, Mopar Truck; Power Steering Return Hose
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
The Saginaw 140 manual steering gear box is a favorite among hot rodders, street rodders and racers alike. In production during a 7-year span from 1971-1977, the 140 gear box has a number of favorable attributes, including...
The Saginaw 140 manual steering gear box is a favorite among hot rodders, street rodders and racers alike. In production during a 7-year span from 1971-1977, the 140 gear box has a number of favorable attributes, including...
1969-82 Corvette; Steering Gear Box; Manual: 16:1 Ratio; Raw Cast Iron Finish
Restore precise steering performance in your 1969-82 Chevrolet Corvette with this all-new reproduction steering gear box. Manufactured with brand new tooling, this unit replaces worn, defective, or non-working original gear...
1963-69 Corvette; Manual Steering Gear Box; 16:1 Ratio; NEW, Not Rebuilt
Upgrade or restore your 1963-69 Corvette with these brand new manual steering boxes. Each unit includes a new coupling assembly for a complete installation. Built to precise OE specifications, these steering boxes provide...
1973-79 C10, 1975-79 Multiple GM; Small Block Power Steering Pump with "A-Style" Reservoir
If you're in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...
1963-74 Corvette Power Steering Pump with Reservoir - New
Why use or mount an old power steering pump on your newly rebuilt engine when you can get a brand new keyway style pump with housing that meets or exceeds OEM specs and save yourself the worry of leaks or strange noises....
Power Steering Return Hose; wthout Fittings; 3/8" x 48"; Cut to Fit; Various Models
Restore safe and reliable steering performance with this high-quality service replacement power steering return hose. A leaking or cracked hose can lead to fluid loss, steering fade, or even total loss of control - don't take...
Reproduction of the original big block power steering adjustor bracket designed for use with 1965-68 Chevrolet Impala, Bel Air, Biscayne, Caprice, 1967-68 Camaro, and 1968 Nova models with big block engines. Manufactured in...
1961-2005 GM, Chrysler, Dodge Plymouth; Saginaw Power Steering Pump Cap
Reproduction of the power steering pump cap designed for use with a variety of 1961-2005 GM, and Chrysler, Dodge, Plymouth models that included a Saginaw power steering pump. Each cap is manufactured in quality injection...
Reproduction of the original style power steeing pump fitting for use with various 1960-77 Chrysler, Dodge, Plymouth, and GM models as listed. Many Saginaw power steering pumps with a female style fitting require an adapter...
Upgrade your small block Chevy with this 1/4" steel power steering bracket set, engineered to mount GM Saginaw power steering pumps with integral reservoir. Featuring a polished chrome finish, this kit delivers both style and...
Universal Power Steering Return Hose; wthout Fittings; 3/8" x 24"; Cut to Fit
Restore safe and reliable steering performance with this high-quality service replacement power steering return hose. A leaking or cracked hose can lead to fluid loss, steering fade, or even total loss of control - don't take...
1978-2006 Power Steering Pump Supply Hose Fitting; Metric; O-ring Style; Various Models
Power steering pump supply hose fitting for 1978-2006 Saginaw power steering pumps requiring a metric style fitting with the o-ring style seal. This fitting is necessary to mount the cover to the pump and connects to the...
1988-92 Chevrolet Corvette; Inner Steerin Rack Tie Rod End; Left, Right
Replacement inner tie rod end for 1988-92 Chevrolet Corvette. This steering rack end directly replaces the original equipment tie rod on specific vehicle applications. It has undergone an industry-leading evaluation process...
1963-82 Corvette; Tie Rod Adjuster Sleeve; Includes 2 Clamps; LH or RH; Each
Reproduction tie rod tube sleeve for 1963-82 Chevrolet Corvette models. Each tube is manufactured to correct factory specifications and provides an accurate replacement for the original steering linkage component. This sleeve...
1959-02 Steering Coupler Hardware Set; With 12-Point Bolt
Convenient set of hardware for steering shaft couplers on many GM vehicles. Set includes the (1) 3/8"-24 hex nut and lock washer and (1) 5/16"-24 nut and lock washer. Also includes the 12-point coupler bolt that secures the...
New, NOT rebuilt, reversed Corvair manual steering box. This style box is popular for use on Hot Rods and Customs with straight axle front suspension and traditional parallel steering setups. These all new boxes are...
1975-79 Corvette; Power Steering Pump; without Reservoir; New
If you're looking for a replacement power steering pump, this brand-new OER® Authorized unit is the perfect choice. Manufactured to meet the highest OEM standards of quality, this pump provides reliable performance,...
1963-82 GM; Tie Rod End; with Hardware; Inner & Outer; RH/LH
Reproduction of the original inner and outer tie-rod end designed for use with various 1963-82 General Motors vehicles. Each tie-rod end is manufactured in forged steel replicating the original design, fitment, and...
1959-82 AMC, GM, Ford; Steering Coupler; 3/4" Shaft; 36 Spline; 3-5/32" Diameter; Various Models
OER reproduction of the original steering coupling joint designed for use on various GM and Ford models. This coupler (rag joint) is required to connect the steering column to the steering box. Each steering coupler is...
Upgrade your classic 1969-72 Chevrolet small block with this high-quality reproduction power steering bracket set, designed for engines with long water pumps. Each bracket is precision-stamped steel, faithfully replicating...
Reproduction steering coupling joint for a variety of AMC, GM, Chrysler, Dodge, Plymouth, and Ford models as listed. This coupler (rag joint) is required to connect the steering column to the steering box. AMC models:...
Upgrade your small block Chevy with this high-quality aluminum power steering bracket set, designed for 1969-86 engines with long water pumps. This kit mounts the power steering pump on the LH (driver) side of the vehicle and...
1960-75 Chevy; Power Steering Pump Pulley; Small Block, Big Block; Various Models
This is a quality OER® reproduction of the original power steering pump pulley designed for use on various GM applications..This pulley is manufactured to exact factory specifications and stamped with the original GM part...
Reproduction of the original style power steering reservoir designed for use with 1963-66 Corvette, 1967-68 Camaro, and 1968 Chevy II Nova small block, V8 models. Replace the old, dented, leaking, or missing reservoir with...
1960-1972 Buick, Chevy, GMC, Pontiac, Oldsmobile; Power Steering Pump Cap; OEM Style; Various Models
Reproduction of the original power steering pump cap designed for use with various 1961-72 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile models. This is a genuine reproduction of the factory-original style cap, not a service...
Reproduction tie rod end dust boots with OE part number on the boots. Tie rod end dust boots measure approximately 1-3/16" on bottom, 1-1/4" on top & 1/2" hole. Sold as a set of 4. Fit a wide variety of 1959 & later GM makes...
Universal Power Steering Return Hose; wthout Fittings; 3/8" x 36"; Cut to Fit
Restore safe and reliable steering performance with this high-quality service replacement power steering return hose. A leaking or cracked hose can lead to fluid loss, steering fade, or even total loss of control - don't take...
1963-77 Power Steering Pump Supply Hose Fitting; SAE; Inverted Flare Style; for Saginaw Pumps
Power steering pump supply hose fitting for 1977 and older Saginaw pumps requiring an SAE style fitting with the inverted flare. This fitting is necessary to mount the cover to the pump and connects to the supply pressure...
1953-62 Corvette, 1949-54 Chevy Passenger; Tie Rod Sleeve Tube; Each; w/o Clamps; # 3691181
Reproduction Tie Rod Tube Sleeve for 1953-1962 Chevrolet Corvette and 1949-1954 Chevrolet passenger car models. Each sleeve is manufactured to correct factory dimensions, providing an authentic replacement that matches the...
1940-62 Bel Air, Styleline, Corvette; Tie Rod End; Right Hand Thread
Replacement left hand thread tie rod end for various 1950-62 Chevrolet models including Bel Air, Corvette, Styleline and Fleetmaster. Includes 1 Tie Rod End, 1 Dust Boot, 1 Castle Nut, 1 Cotter Pin, 1 Grease Fitting....
1940-62 Bel Air, Styleline, Corvette; Tie Rod End; Left Hand Thread
Replacement left hand thread tie rod end for various 1950-62 Chevrolet models including Bel Air, Corvette, Styleline and Fleetmaster. Includes 1 Tie Rod End, 1 Dust Boot, 1 Castle Nut, 1 Cotter Pin, 1 Grease Fitting....
1985-1989 Corvette; Power Steering Hose; Reservoir to Pump
Restore precise and reliable steering performance in your 1985-1989 Corvette with this premium reproduction power steering hose. Designed to connect the reservoir to the pump, this hose is manufactured to factory...
1985-89 Corvette; Power Steering Hose; Gear to Reservoir
Maintain proper steering performance in your 1985-89 Corvette with this high-quality reproduction power steering hose, designed to connect the gear to the reservoir. Each hose is built to OEM specifications for a precise fit,...
Reproduction plated grease or zerk fittings designed for a variety of applications, including the replacement of worn or missing fittings on tie rod ends, center links, and other suspension or steering components. When...
1963-82 Corvette, 1960-69 Chevrolet; Clamp; Tie Rod End Clamp; 13/16" ID x 3/4" Wide; Each
Reproduction tie-rod end clamp for 1963-82 Chevrolet Corvette and various other GM models. Each tie rod end clamp is manufactured in quality stamped steel to factory original specifications. Measures 13/16" ID x 3/4" Wide....
1961-74 GM, 1968-74 AMC, 1963-74 Mopar; Saginaw Type Power Steering Pump; w/o Reservoir; New
OER Authorized power steering pump for use with various 1961-74 AMC, GM, and Mopar models with a Saginaw style power steering pump. Each pump is manufactured to correct OEM standard of quality. This new power steering pump is...
1960-77 Power Steering Pulley Nut & Washer Set; for GM Models
Reproduction power steering pulley washer and nut for various 1960-77 GM models. This lock-nut and washer set is needed to secure the power steering pulley to the pump. Measures 9/16"- 18.
5/16"-24 Grade 8 Hex Nut Zinc; Each
5/16"-24 Grade 8 hex nut in zinc & yellow finish. Sold individually. Product Specifications: Screw Size : 5/16-24 Across Flats : Hex Width: 7/16" Grade : 8 Finish : Zinc & Yellow Proof Load : 150000 Rockwell Hardness :...
1960-77 GM & Mopar; Saginaw Power Steering Fitting Adapter; 5/8"-18 to -6AN
This is the hose adapter fitting for Saginaw power steering gear box or pump. Straight, inverted flare zinc coated steel, 5/8"-18 to -6AN. Fits most Saginaw gear boxes or pumps 1960 through 1977 including Saginaw P series....
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is the chrome plated set...
1984-87 Chevrolet Corvette; Inner Steerin Rack Tie Rod End; Left, Right
Replacement inner tie rod end for 1984-87 Chevrolet Corvette. This steering rack end directly replaces the original equipment tie rod on specific vehicle applications. It has undergone an industry-leading evaluation process...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Stud And Bolt Kit; Black Phosphate Coated Bolts
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is black phosphate...
OER Original Hue Steering Box Paint; Saginaw Blue / Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® Original Hue Saginaw Blue-Gray paint is specifically formulated to perfectly match the factory colors of specific components installed on your vehicle at the factory. Unique shades are available so that you can...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Reservoir Installation Kit; Standard Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has unfinished hardware that are designed to be used with a...
1962-2002 GM, Chrysler, Plymouth, Dodge; Saginaw Power Steering Pump O-Ring Seal Kit
Reproduction of the O-rings for 1962-77 Saginaw power steering pumps. Includes 8 seals to replace the old or worn out originals for the pump to the reservoir. Does not include the shaft seal. Fits most Saginaw pumps through...
1962-2002 GM & Mopar; Saginaw; Power Steering Reservoir Installation Kit; Chrome Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has chrome hardware that are designed to be used with a chrome...