Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1965-67 Impala, Bel Air, Chevy II, Nova, Camaro; "327" Front Fender Emblem; Each; GM Licensed
Reproduction of the original front fender emblem designed for use on various 1965-67 GM models. Each emblem is manufactured to exact factory specifications in zinc die-cast metal featuring a bright polished chrome finish....
2013 Corvette; Emblem; Rear Bumper Cover; 60 Year Anniversary; Each
Reproduction rear bumper cover emblem for 2013 Corvette models. This is an adhesive emblem that has guide pins on the back for proper alignment. This emblem will fit 2005-2013 Corvettes but was produced for the 2013 60th...
1968-74 Chevrolet Corvette; Crossed Flag Emblem; Fuel/Gas Door
Reproduction crossed flag fuel door emblem for 1968-74 Chevrolet Corvette. This is a stud mounted not adhesive for 1968 late design and 1969-73 all. Triple chrome plated. Sold individually.
1964-72 GM; Rear End Positraction Tag; Red; 3/4"
Reproduction of the original rear end positraction tag designed for use on various Buick, Chevrolet, Oldsmobile, and Pontiac models with 12 bolt positraction differentials. Each tag is manufactured in molded plastic to GM...
Reproduction injection molded Bow Tie rear decklid or rear panel emblem. This emblem fits on the rear of a wide variety of GM models including 1993-2002 Camaro, 2000-2005 Corvette, Impala & Monte Carlo, 2000-2001 Lumina....
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1958-72 Chevrolet; "383 Crossed Flags" Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
1969-74 Chevrolet; Crossed Flag Valve Cover Insert ; for Finned Valve Cover; with Hi Performance
Correct reproduction of the original round "Crossed-Flags" decal that was applied to the passenger side valve cover. Normally used on all high performance small block finned aluminum valve covers, each insert features an...
1965-76 Chevrolet; 502 Crossed Flags Air Cleaner Emblem; Die-Cast
OER® die-cast air cleaner emblem, featuring correctly painted crossed flags and a superb chrome plated finish. Although the 502 engine wasn't originally installed in early model vehicles, it can be used when replacing any...
1977-79 Chevrolet Corvette; Crossed Flags Emblem; Front Fender
Reproduction front fender crossed flags flags emblem for 1977-79 Chevrolet Corvette models. Bright red and Checkered crossed flags with chrome border and flag sticks. 3M adhesive tape on the back. Sold individually.
1963-72 Chevrolet; "427 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
1978-79 Chevrolet Corvette; Crossed Flags Emblem; Fuel Door
Reproduction fuel door crossed flags flags emblem for 1978-79 Chevrolet Corvette models. Bright red Bowtie and Checkered crossed flags with chrome border and flag sticks. Two locating posts on the back. Sold individually.
1963-72 Chevrolet; "502 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
Custom "502" front fender emblem designed in classic style lettering for an authentic original appearance. Each emblem is manufactured in die-cast matching the original style designs of the era. If you have a 502ci engine,...
1969-76 Corvette; Stingray Front Fender Emblem; GM Licensed
Reproduction Stingray front fender emblem for 1969-76 Corvette models. Each emblem is manufactured in quality die-cast zinc and features correct chrome and black design including mounting studs. Replaces original GM part...
1963-64 Corvette; "Fuel Injection" Front Fender Emblem; Each
Finish your Corvette restoration with this exact reproduction "Fuel Injection" front fender emblem designed for 1963-64 models. Each emblem is manufactured in quality die-cast zinc and features the correct "Fuel Injection"...
1958-61 Chevrolet Corvette; "Fuel Injection" Emblem/Name Plate
Reproduction "Fuel Injection' emblem/name plate in script for 1958-61 Chevrolet Corvette models with fuel injection. It has 3 mounting pins on the back. Can also be a universal for any application that has fuel injection....
2013 Corvette; Emblem; Front Bumper Cover; 60 Year Anniversary; Each
Reproduction front bumper cover emblem for 2013 Corvette models. This is an adhesive emblem that has guide pins on the back for proper alignment. This emblem will fit 2005-2013 Corvettes but was produced for the 2013 60th...
1963-66 Corvette; Crossed Flags Front Fender Emblem; Each; GM Licensed
Reproduction crossed flags front fender emblem for 1963-66 Chevrolet Corvette. Each emblem is manufactured in die-cast zinc replicating the original in design, appearance and fitment. Features correct crossed flag coloration...
1953-18 Chevrolet Corvette; Retro Fender Emblem; Mako Shark; Each
Retro Stingray Mako Shark fender emblem for 1953-18 Chevrolet Corvette. Brightly chrome plated with exquisite detail. Sold individually.
1964-89 Buick, Chevy, GMC, Pontiac, Oldsmobile; Rear Axle Identification Tag; Various Models
This reproduction limited slip rear axle ID tag is designed to ensure the correct gear oil is used when servicing the rear end. Commonly found on 1964-1989 GM models, this tag identifies the proper lubrication requirement for...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Universal Barrel Nut Kit, fits 1/8" Emblem Stud, fits 11/64" Hole; 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....
Push On Flat Nut, Fits 3/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits5/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Thread Cutting Nut, 1/8" Stud Size, 1/4" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with...
1964-67 "GM Mark Of Excellence" Door Deflector Decal; Embossed; Aqua; Each
Reproduction of the original "GM Mark of Excellence" door reflector decal original installed on many various 1964-67 General Motors vehicles. It is used as a reflector to allow upcoming traffic to see the car door when...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut, Fits 5/32" Stud, Fits 7/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Push On Flat Nut, Fits 1/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 1/8" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 5/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 3/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; "Body by Fisher" Door Sill Plate Emblem; Embossed; Each
Reproduction "Body By Fisher" door sill plate emblem for GM vehicles. This emblem is manufactured to correct specifications and includes the correct coach colors and the word "Fisher" embossed on the emblem with a peel and...
1965-70 Chevrolet; 375 HP Turbo-Jet; Air Cleaner Emblem; Die-Cast
This OER® die-cast air cleaner emblem is similar in shape and size to the turbo-jet decal used on the air cleaners of various big block equipped vehicles of the era. This unique replacement emblem features a superb chrome...
1965-73 Chevrolet; 450 HP Turbo-Jet; Air Cleaner Emblem; Die-Cast
This OER® die-cast air cleaner emblem is similar in shape and size to the turbo-jet decal used on the air cleaners of various big block equipped vehicles of the era. This unique replacement emblem features a superb chrome...
1965-73 Chevrolet; 400 HP Turbo-Jet; Air Cleaner Emblem; Die-Cast
This OER® die-cast air cleaner emblem is similar in shape and size to the turbo-jet decal used on the air cleaners of various big block equipped vehicles of the era. This unique replacement emblem features a superb chrome...
Thread Cutting Pal Nut Set; with Sealer, 3/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut, 5/32" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 3/16" Stud Size, Hex Washer Head, Zinc Plated
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 1/4" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
1965-69 Chevrolet; 396 Crossed Flags Air Cleaner Emblem; Die-Cast
OER® die-cast air cleaner emblem, featuring correctly painted crossed flags and a superb chrome plated finish. This unique replacement emblem is designed with modern adhesive backing for simple, secure application to the...
1970-80 Chevrolet; 454 Crossed Flags Air Cleaner Emblem; Die-Cast
OER® die-cast air cleaner emblem, featuring correctly painted crossed flags and a superb chrome plated finish. This unique replacement emblem is designed with modern adhesive backing for simple, secure application to the...
1966-69 Chevrolet; 427 Crossed Flags Air Cleaner Emblem; Die-Cast
OER® die-cast air cleaner emblem, featuring correctly painted crossed flags and a superb chrome plated finish. This unique replacement emblem is designed with modern adhesive backing for simple, secure application to the...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...
1965-73 Chevrolet; 425 HP Turbo-Jet; Air Cleaner Emblem; Die-Cast
This OER® die-cast air cleaner emblem is similar in shape and size to the turbo-jet decal used on the air cleaners of various big block equipped vehicles of the era. This unique replacement emblem features a superb chrome...