OER® reproduction of the original style rubber bumper designed for use with various GM applications. Each rubber stopper is manufactured to correct specifications in EPDM rubber ensuring long lasting quality. Will fit...
1966-67 Chevy II, Nova; Rubber Stopper Set; 12 Piece Set
Reproduction of the original common rubber bumpers and stoppers used in 1966-67 Chevy II and Nova models. Each stopper kit includes a variety of rubber bumpers and stoppers that will replace the commonly missing or worn out...
1961-2002 Buick, Chevy, Pontiac, Oldsmobile; Inner & Outer Door Handle Bumper; Each; Various Models
Reproduction door handle bumper manufactured to factory specifications from correct rubber material to fit and function as original. This rubber bumper is designed to protect the sheet metal of the door where the outer door...
1993-2005 Camaro, Firebird, Grand Am; Console Door & Ash Tray Door Bumper; Each; Various Models
Correct reproduction of the original console door and console ash tray cover rubber bumper for 1997-2002 Camaro and Firebird models. Sold individually, use as required. Fitment Applications: 1997-2002 Camaro / Firebird...
1993-2002 Camaro, Firebird; Rear Lift Window Stopper; Each
Reproduction of the original style rear lift rubber window stopper for use with 1993-2002 Camaro and Fiirebird hatchback models. This stopper is applied to rear compartment window to keep rear window panel from the correct...
1967-69 Camaro, Firebird, 1968-79 Nova; Front Door Bumper; Each
Correct replacement front door rubber bumper for 1967-1969 Camaro, Firebird, 1967-70 Impala, Full Size, 1968-79 Nova, X body 4 door models. Each bumper is replicated to the original OE specifications and fits the door...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; Trunk Lid Rubber Bumper On Lid; Each; Various Models
Correct reproduction of the original trunk lid rubber bumper for use with various 1961-81 Buick, Chevy, Pontiac, and Oldsmobile models. Manufactured in EPDM rubber to factory specifications. Used to eliminate the trunk lid...
1968-74 Nova, Apollo, Omega, Ventura; Rubber Stopper Set; 14 Piece Set
Reproduction of the original common rubber bumpers and stoppers used in 1968 Chevy II and 1968-72 Nova and X body models. Each stopper kit includes a variety of rubber bumpers and stoppers that will replace the commonly...
1959-79 Buick, Chevy, Pontiac, Oldsmobile; Seat Back Bumper; Oval Style; Each; Various Models
Reproduction of the original oval style seat back bumper designed for use on various 1959-79 GM vehicles. Each bumper is manufactured in hard rubber including a steel core for added strength. The bumper is installed where the...
1962-65 Chevy II, Nova; Rubber Stopper Set; 14 Piece Set
Reproduction of the original common rubber bumpers and stoppers used in 1962-65 Chevy II and Nova models. Each stopper kit includes a variety of rubber bumpers and stoppers that will replace the commonly missing or worn out...
1968-81 Nova, Apollo, Omega, Phoenix, Ventura; Outer Door Rubber Stopper Set ; 4 piece set
Reproduction of the original style rubber bumpers designed for use on 1968-79 Chevy II, Nova, and GM X-body models. The rubber stoppers on your door will wear out or detereriate over time. These reproduction stoppers will...
1961-83 GM; Seat Back Rubber Bumper Stopper; Various Uses & Models; Each
Correct replacement of the rubber bumper for use on various GM models. This rubber stopper will help insure that your seat/hood is aligned properly. Sold individually. Use as required per vehicle. 1-3/16" long, diameter of...
1962-65 Chevy II, Nova; Hood Side Rubber Bumpers; 4 Piece Set
Reproduction of the original hood side bumpers for use with 1962-65 Chevrolet Chevy II and Nova models. The rubber stoppers on a hood can wear out, deteriorate, or simply lost. Each bumper is manufactured in quality EPDM...
1982-04 GM; Hood Adjustment Rubber Bumper & Bolt; 1" Diameter; Each; Various Models
Replace your original rubber hood adjuster stoppers with a correctly configured reproduction hood adjustment bumper. This part replace the adjuster bolt and the rubber bumper for a complete bolt-on replacement of the...
1987-04 GM, 1993-97 Camaro, Firebird; Hood Adjuster Bumper Cap; Each
Reproduction of the front hood adjuster bumper cap for 1993-97 Camaro, Firebird, and various other 1987-2004 GM models. Manufactured to correct factory dimensions in quality EPDM rubber for an authentic replacement. Sold...
1987-2016 GM; Rear Trunk Lid Access Hole Plug; Each; Various Models
Reproduction trunk lid drain hole plug for 1987-2016 GM vehicles including 1991-96 Impala and Caprice models. Manufactured from molded rubber as original, these install on the underside of the trunk lid. Measures 9/165"...
1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models
Reproduction hood adjustment bumpers for various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated, or lost originals. Allows for a...
1961-79 GM; Bucket Seat Back Rubber Stopper Set; Round; w/Mounting Screws; Pair
Reproduction of the original seat back rubber stoppers designed for use on various 1961-79 GM models. These rubber stoppers help prevent rattling and keep the seat back positioned correctly. Replace worn out or missing seat...
1958-77 Buick, Chevy, Olds, Pontiac; Hood Adjust Bumper and Screw Set; Various Models
Reproduction hood adjustment bumpers for various 1958-77 GM models including 1967-69 Camaro and Firebird models. These 7/8" OD reproduction stoppers and screws are manufactured to original specifications to replace the worn...
1955-1976 Glove Box Door Arm Rubber Stopper
Reproduction of the original glove box door arm rubber stopper designed for use on various GM models. Eliminate the rattling and looseness of the glove box door by simply replacing the worn out or missing rubber glove box...
1980-2016 GM; Outer Hood Adjust Rubber Bumper; Each; Various Models
Reproduction of the original molded rubber hood adjustment bumper located on the outer hood for various 1980-2002 GM models. This reproduction molded rubber bumper is manufactured to original specifications for an authentic...
1955-72 GM; Lower Control Arm Bumpers; Polyurethane; Black; Pair
Polyurethane lower control arm bumper stops are guaranteed to last longer and perform better than O.E.M. rubber stops. Cushions impact between suspension components preventing excessive damage. Sold as a pair. 1 pair required...
Lower Control Arm Bumper / Rear Axle Bumper
Replacement rear axle bumper / lower control arm bumper for models listed below. 1962-67 Chevy II/Nova rear axle bumper. 2 required. 1963-87 Chevrolet/GMC Truck lower control arm bumper. 2 required.
1955-1981 GM; Firewall Pad Fastener; Each
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
1964-72 Chevrolet, Pontiac; Lower Control Arm Bumper; Each; Various Models
Reproduction of the original lower control arm bumper designed for use on various GM vehicles including 1968-1969 Camaro and Firebird models. Each bumper is manufactured from durable hard rubber and features the correct...
1962-70 Buick, Chevy; Pontiac, Oldsmobile; Control Arm Bumper; Rubber; Each; Various Models
Reproduction of the original control arm bumper designed for use on various GM models. Each bumper is manufactured to factory specifications in the correct configuration and includes a built in stud ensuring a perfect fit....
1962-66 Chevrolet; Door Rubber Bumper Set; 4 Piece Set; Various Models
Replacing the rubber door stoppers will help keep your doors aligned correctly while adding a factory fresh appearance to the vehicle. Each rubber bumper is designed and manufactured to exact OE specs. Manufactured in quality...
1962-81 GM; Glove Box Door Arm Rubber Bumper
OER® reproduction of the original glove box door arm rubber bumper designed for use with various 1962-81 GM models. This rubber bumper is manufactured in EPDM rubber to the original factory configuration. Was installed on...
1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each
Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...
1998-02 Camaro, Firebird, 2003-13 Impala; Hood Adjust Bumper, Front Center, Each; OER
Correct replacement of the original hood adjuster and bumper designed for use on 1998-2002 Camaro and Firbeird models. This hood adjust bumper will install on the front center bumpers that go on the facia center support. Each...
1962-65 Chevy II Nova; Upper Vent Window Rubber Bumpers; Hardtop, Convertible; Pair
Reproduction of the original upper vent window rubber stop bumper for 1962-65 Chevy II and Nova hardtop and convertible models. Each rubber stop is manufactured to original specifications using quality EPDM rubber for an...
1962-65 Chevy II, Nova; License Plate Bumpers; Set of 4
Reproduction of the original rubber license plate bumpers originally installed on 1962-65 Chevy II and Nova models. This bumper will keep the license plate bracket from making contact with the rear body panel possibly causing...
1966-67 Chevy II Nova; Upper Vent Window Rubber Bumpers; Hardtop; Pair
Reproduction upper vent window rubber stop bumpers for 1966-67 Chevy II and Nova hardtop models. Each rubber stop is manufactured to original specifications. Sold in pairs.
Reproduction rubber bumper for various GM applications. Each bumper is manufactured in EPDM rubber to factory specifications replicating the original in design and fitment. This bumper was used for various applications...
1966-1979 Camaro, Impala, Nova; Rubber Side Hood Bumper; Each
Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...
1938-91 GM; Consol & Glove Box Rubber Stoppers; Fits 1/4" Hole; Pair
Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...
1962-78 Nova, Camaro, Firebird, Impala, Truck; Speedometer Cable Firewall Grommet; w/Steel Insert
Quality reproduction of the original speedometer cable firewall grommet designed for use on various 1962-73 Chevy II Nova, Camaro, Impala, Bel Air, Biscayne, Caprice, Firebird, and 1973-78 Chevrolet, GMC truck models as...
1970-90 GM; Lower Door Window Stop Bumper; Each; Various Models
Correct reproduction rubber stop bumper designed to keep the door glass from rolling down beyond the required travel point. Each stopper is manufactures from quality EPDM rubber and features a press fit retaining tab for easy...
1977-2005 Buick, Chevy, Olds, Pontiac; Compartment Lid Rubber Bumper; Front or Rear; Each
Reproduction of the original rear compartment lid rubber stopper needed to prevent the rear compartment lid from slamming against the body. Each rubber bumper is manufactured in quality EPDM rubber that replicates the...
Reproduction of the original rubber stopper designed for use on the upper door section of the various GM models listed below. Each rubber stopper is manufactured to replicate the original in fitment and appearance. This...
1958-72 Buick, Chevy, Olds, Pontiac; Trunk Lid Rubber Stopper; Each; Various Models
Correct OER® reproduction of the original trunk lid rubber bumpers designed for use with various 1958-72 GM models. These rubber bumpers are engineered to replicate the factory originals in design, fit, and function. Each...