1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair
Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....
1968 Camaro, Chevy II Nova, Firebird; Subframe Assembly; OEM Style; without Trans Crossmember
Why waste money trying to repair a damaged subframe that may be compromised internally when you can replace it with this high quality Restorer's Choice reproduction. This reproduction subframe assembly is engineered to...
1968 Camaro, Firebird, Chevy II, Nova; Subframe Assembly; with TH400 Crossmember ; OEM Style
Reproduction of the original complete subframe assembly designed for use with 1968 Camaro, Nova, and Firebird models equipped with TH400 crossmembers. Instead of repairing a damaged or internally compromised factory subframe,...
1955-81 GM; Leaf Spring U-Bolts; 3-1/4" wide x 6-3/4" long; Fits 3-1/4" Axle Tubes; Pair
Replacement OE style U bolts and nuts for rear leaf springs from OER. Designed to secure the leaf spring pack to the rear axle with factory correct strength and reliability. Each set includes heat treated Grade 8 nuts and...
1962-67 Chevy II, Nova; Mono Rear Leaf Springs; Pair; Made in the USA
These reproduction rear leaf springs are engineered for an exact, direct replacement of the original mono leaf springs used on 1962-1967 Chevy II and Nova models. Each spring is manufactured to factory specifications and...
1967-69 Camaro, Firebird, 1968-79 Nova; Mono Rear Leaf Springs; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models, and 1968-79 Chevy II, Nova, and X-body models. Each leaf spring is manufactured to factory specifications and...
Replace the sagging leaf springs on your classic GM vehicle with this high quality set produced by OER. These replacement rear leaf springs are engineered to directly replace the original multi leaf spring set while...
1962?1967 Chevrolet Chevy II, Nova; Crossmember Kit Mustang II IFS Front End
Upgrade the factory front suspension of your 1962?67 Chevy II Nova with a high-performance Mustang II front end. This heavy-duty crossmember, crafted from durable 7-gauge steel, is engineered to accept a no-strut Mustang II...
1959-81 GM; Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for use on various GM models. Manufactured from durable EPDM rubber, this spacer was originally installed to correct uneven ride height on vehicles that did not...
1963-67 Chevy II, Nova Front End Suspension Rebuild Kit; with Inner& Outer Tie Rod Ends
This kit includes a comprehensive assortment of front end components engineered to renew worn out original suspension parts. Designed to restore proper handling, improve steering control, and reduce uneven front tire wear,...
This kit includes a comprehensive assortment of front end components engineered to renew worn out original suspension parts. Designed to restore proper handling, improve steering stability, and reduce uneven front tire wear,...
1962 Chevy II, Nova; Front End Suspension Rebuild Kit; with 3-1/2" Outer Tie Rod Ends; 1st Design
This kit includes a comprehensive assortment of front end components engineered to renew worn out original suspension parts. Designed to restore proper handling, improve steering control, and reduce uneven front tire wear,...
1967-69 Camaro, Firebird; 1968-74 Nova; Upper Control Arms; Pair
Reproduction upper control arms for various GM models including 1967-69 Camaro, Firebird, and 1968-74 Chevy II, Nova models. These reproduction upper control arms includes pre-installed bushings, shafts and ball joints. If...
1968-74 Nova, Ventura, Apollo, Omega; Front End Suspension Rebuild Kit; Outer Tie Rod Ends Only
This kit includes a comprehensive assortment of front end components engineered to renew worn out original suspension parts. Designed to restore proper handling, improve steering stability, and reduce uneven front tire wear,...
1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1971-2005 GM; Lower Control Arm Bushing; Passenger Car and Truck; Varius Models; Each
Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or...
1964-74 Chevy, Pontiac, Oldsmobile; Lower Control Arm Bolt; 1/2"-13 x 3-3/4"; Each
OER reproduction bolt used to install the lower control arms on various GM models. Fits front lower control arms. The bolts are made from high strength grade 8 steel which as been formed and thread rolled to exact OE specs...
1962-67 Chevy II / Nova; Lower Control Arm Ball Joint; with Hardware
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1962-67 Chevy II / Nova; Upper Control Arm Ball Joint; with Hardware
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
This stock replacement spindle set is designed for a variety of GM vehicles and is manufactured to match the original GM spindles in every critical dimension. Constructed from durable cast iron and finished in black for an...
1968-69 Camaro, Firebird, 1968-79 Nova, X Body; Lower Rear Shock Mount Bolt; Each
Reproduction of the lower rear shock mounting bolt for 1968-1969 Camaro and Firebird models, as well as 1968-1979 Nova, 1971-1977 Ventura, 1973-1980 Omega, 1973-1975 Apollo, and 1975-1980 Skylark models equipped with multi...
1962-69 Chevy II Nova 1967-69 Camaro Firebird; Sway Bar Bushings; Original Design
Reproduction of the original sway bar bushings designed for use with 1962-69 Chevy Nova, 1967-69 Camaro and Firebird models. Each bushing is manufactured in quality EPDM rubber replicating the original in design, dimensions,...
This drop spindle set is designed to provide a full 2 inch drop on a variety of GM vehicles while preserving factory ride quality, suspension geometry, and handling characteristics. Each spindle is manufactured from durable...
1967-69 Camaro, Firebird, 1968-74 Nova; Lower Tubular Control Arm Set; RH & LH; Pair
Enhance the handling performance of your 1967-69 Camaro, Firebird, or 1968-74 Nova with these high quality tubular lower control arms. Stronger and lighter than factory arms, these tubular replacements provide improved...
1962-67 Chevy II, Nova; Disc Brake Spindle Set; Stock Height; LH And RH; Pair
Converting your drum brake car to disc brakes will drastically reduce the braking effort needed to stop your vehicle quickly and safely. When converting your 4-lug or 5-lug drum vehicle to disc brakes, you will need to change...
1967-69 Camaro, Firebird; 68-74 Nova; Front Sway Bar; Silver Zinc Finish; 13/16"
Reproduction of the original design front sway bar for 1967-69 Camaro, Firebird and 1968-74 Chevy II Nova models. This silver zinc plated sway bar is compatible with factory mounting brackets. Measures 13/16" in diameter and...
1973-91 Chevrolet, GMC 3/4, 1 Ton 2WD Truck; Lower Control Arm; LH Driver Side
Reproduction of the original lower control arm designed for use with 1973-1991 Chevrolet and GMC truck models with 3/4 ton or 1 ton suspension. This control arm is manufactured in stamped steel to correct factory...
1954-05 GM; Front Sway Bar End Link; 3-3/8" Spacer; LH or RH; 2 Required; GK8988
Complete replacement set designed to restore proper suspension performance by replacing the original worn bushings and hardware. Manufactured to factory specifications for durability and precise fit. Features and Benefits:...
1964-67 Chevy II Nova; Lower Control Arm; with Ball Joint & Bushing; LH Drivers Side
Reproduction of the original lower control arm designed for 1964-67 Chevrolet Chevy II and Nova models. This premium stamped steel assembly is engineered to match the factory configuration with exceptional accuracy,...
1962-67 Chevy II Nova; Strut Rod; with Hardware
Reproduction of the original strut rod designed for use on 1962-67 Chevy II Nova models. Manufactured to correct OE specifications for reliability and authenticity. Rods are 21-3/4" overall length, 5-5/8" thread length,...
This stock replacement spindle is designed for a variety of GM applications and is engineered to match the original GM spindle in design, fit, and function. Manufactured from durable cast iron and finished in black for an...
1982-02 Camaro, Firebird; Rear Sway Bar; 3/4" Diameter; with Hardware
Replacement rear sway bar for 1982-2002 Camaro and Firebird models. This 3/4" diameter sway bar is engineered to reduce body roll, under steer, and over steer during cornering, resulting in improved vehicle stability,...
1968-81 Camaro, Firebird, Nova; Rear Sway Bar Anchor Plate Bolt; 7/16"-20 X 1-5/16"
Bolt and nut used to attach the rear sway bar bracket to the lower anchor plate and leaf spring perch. This case hardened bolt measures 7/16"-20 x 1-5/16" and is designed for models equipped with standard suspension. 4 bolts...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1973-91 Chevrolet/GMC C20/C30 Truck; Upper Control Arm; 3/4, 1 ton; 2 WD; LH Driver Side
Reproduction of the original upper control arm designed for use with 1973-1991 Chevrolet and GMC truck models with 3/4 ton or 1 ton suspension. This control arm is manufactured in stamped steel to correct factory...
1964-69 Camaro, Chevelle, Nova, Firebird; Front Sway Bar Brackets; Pair
Reproduction of the original style U-shaped sway bar bushing clamps designed for use on various 1967-69 GM models. These factory correct reproductions are used to hold the inner sway bar bushings and the sway bar to the...
1968-74 Chevy II, Nova, X-Body; Rear Shock Tower Support Panel; RH Passenger Side
Reproduction of the original rear shock tower support panel for use with all 1968-74 Chevy II, Nova, and X-body models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours...
1962-67 Chevy II, Nova; Lower Control Arm Bushing; with Built-In Endcaps
Authentic reproduction of the original control arm bushing designed for use on the lower control arm for 1962-67 Chevrolet Chevy II models. Manufactured in steel clad rubber to be pressed into place. If your suspension...
1968-69 Camaro, Firebird, 1968-79 Nova; Multi Leaf Spring Pad Set; 4 Piece Set
Each pad is designed to insulate the contact area between the leaf spring and the mounting plate, preventing metal to metal contact that can lead to noise, vibration, and premature wear. These pads help maintain proper...
1962-87 Buick, Chevrolet, Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set; Various Models
This rivet style bolt set attaches the ball joint to the upper control arm while providing the authentic appearance of factory installed rivets. Each bolt features a serrated locking rivet style head that prevents spinning...
1988-2005 Chevrolet, GMC; Upper Ball Joint; 2WD / 4WD;
Reproduction of the original style upper ball Joint for designed for use with 1988-2005 Chevrolet and GMC truck models. Each ball joint installs into the upper control arm with four bolts, washers and nuts. Hardware included....
1983-2005 S10, S15, Blazer, Jimmy, Sonoma; Upper Ball Joint; 2/4 Wheel Drive; Each
Reproduction of the original upper ball Joint for use with various 1983-05 Chevrolet and GMC truck models with 2 or 4 wheel drive. Each ball joint installs into the lower control arm with four bolts, washers and nuts that are...
Includes all the components needed to replace the original bushings and hardware. One set services only one side of the vehicle, with two sets required per vehicle. Features a 2" spacer for proper installation and alignment....
1967-81 Camaro, Firebird, Nova, GM X-Body; Rear Spring Eye Bracket Bolt Set; 6 Piece Set
Quality reproduction rear spring eye bracket bolts designed to mount the leaf spring front eye bracket. Each bolt is case hardened for exceptional durability, strength, and long lasting performance. An ideal replacement for...
1964-1981 Various GM Vehicles Camaro, Firebird, GTO, Cutlass; Coil Spring; Spacer 3/8"
We now have reproduction of the coil spring spacer that goes between the front lower control arm and spring for 1964-81 GM Applications including Camaro, Firebird Cutlass and GTO models. It is perfect to lift the front end a...
1962-67 Chevy II, Nova; Front Eye Bolt; with Cupped Washer & Nut; Grade 8
Replacement front eye bolt kit with cupped washer and nut for 1962-1967 Chevy II and Nova rear leaf springs. This high quality kit includes a 7/16-20 x 5 1/8" Grade 8 hex shoulder bolt, a.57" x 2.50" x.46" cupped washer, and...
New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...
1978-05 GM; Lower Control Arm Bushing; Rearward
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
1960-88 Various GM Vehicles Camaro, Impala, Cutlass; Front Sway/Stabilizer Bar; Bushing 1-1/4"
New 1-1/4" sway bar bushing for use with original bracket various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment. Replace the old...
1960-96 Various GM Vehicles Camaro, Cutlass, Impala; Front Sway/Stabilizer Bar; Bushing WS6; 13/16"
New 13/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
New 15/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
1967-69 Camaro, Firebird; 1962-69 Chevy II Nova; Rear Leaf Spring Shackle; LH or RH; Each
This reproduction rear spring shackle is engineered for 1967-1969 Camaro and Firebird models and built to match the original in appearance, quality, and fit. Designed to OEM specifications, each shackle includes all required...
1967-74 GM; Control Arm Ball Joint; Upper
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Reproduction sway bar end link for various 1955-2005 GM car and truck models. Replaces the sway bar end links to eliminate issues associated with worn out links. Each sway bar link includes rubber bushings. Includes 4...
1967-81 Camaro Z/28, Firebird, Nova; Rear Leaf Springs; 4 Leaf; Spring Rate 126 lbs; Pair
Reproduction of the original 4 leaf rear leaf springs designed for use with 1967-1969 Camaro Z28 (302), 1968-1981 Firebird 400 and other performance models, as well as Chevy II, Nova, and various GM X body models originally...
1962 Chevy II, Nova; Front End Suspension Rebuild Kit; with 11" Outer Tie Rod Ends; 2nd Design
This kit includes a comprehensive assortment of front end components engineered to renew worn out original suspension parts. Designed to restore proper handling, improve steering control, and reduce uneven front tire wear,...
Reproduction molded rubber front coil spring insulator designed to mount between the coil spring and the frame on various 1949-2002 vehicles. This insulator prevents metal to metal contact, reducing noise, vibration, and...
1964-74 GM; Lower Ball Joint; Various Models; RH or LH
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Introducing the latest innovation in independent front suspension systems ? the Deluxe Nova IFS Crossmember. Engineered for performance and durability, this advanced front end kit is designed for builders who want the...
1963-67 Chevy II, Nova; Front End Suspension Rebuild Kit; with Outer Tie Rod Ends Only
This kit includes a comprehensive assortment of front end components engineered to renew worn out original suspension parts. Designed to restore proper handling, improve steering control, and reduce uneven front tire wear,...