1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models
1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Correct reproduction of the original fuel tank designed for with 1962-1967 Chevy II. Nova models. This reproduction fuel tank is manufactured in stainless steel replicating the original GM tank offering originality with an...
1967-69 Camaro, Firebird, 1967-72 Nova; Carburetor to Accelerator Cable; 6 Cylinder; OER
Reproduction accelerator cable for 1967 Camaro, Firebird (6 and 8 cyl), 1968-69 Camaro, Firebird (6 cyl), 1968-72 Nova (6 cyl) models. A faulty cable can lead to problems associated with acceleration and become a safety...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1968-69 Chevy II / Nova; Fuel Tank; 18 Gallon; Nitern Coated Steel
Correct reproduction of the original fuel tank designed for with 1968-69 Chevrolet Chevy II and Nova models. This reproduction fuel tank is manufactured in Nitern coated steel. This is a 18 gallon fuel tank that replaces the...
1962-67 Chevy II, Nova; Fuel Tank; Zinc Coated; 16 Gallon Tank
Correct reproduction of the original fuel tank designed for with 1962-67 Chevrolet Chevy II and Nova models. This reproduction fuel tank is manufactured in zinc coated steel. This is a 16 gallon fuel tank that replaces the...
1965-67 Chevy II, Nova; Gas Cap; Chrome
Correct reproduction of the original fuel cap for use with 1965-67 Chevy II and Nova models. This reproduction gas cap is manufactured to exact factory specifications and dimensions offering an authentic appearance and bright...
1966-67 Chevy II, Nova; Fuel Tank Sending Unit; with 4 Bbl Carb; 3/8" Line
Reproduction of the original fuel tank sender unit designed specifically for 1966-67 Chevrolet Chevy II and Nova models with a 4 bbl carburetor with 3/8" line. Each sender is produced in quality steel to resist corrosion...
Correct reproduction of the original fuel tank designed for 1998-2002 Chevrolet C2500, C3500, GMC C2500 and C3500 models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the...
1962-65 Chevy II, Nova; Fuel Tank Sending Unit; with 4 Bbl Carb; 3/8" Line
Reproduction of the original fuel tank sender unit designed specifically for 1962-65 Chevrolet Chevy II and Nova models. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel...
1962-1964 Chevy II / Nova; Fuel Tank Filler Neck; Zinc Coated
A reproduction of the original style fuel tank filler neck designed for use with 1962-1964 Chevy II, Nova models. Each filler neck is manufactured in quality stamped steel featuring a zinc-plated coating for long-lasting rust...
1962-64 Chevy II, Nova; Gas Cap; Chrome
Correct reproduction of the original fuel cap for use with 1962-64 Chevy II and Nova models. This reproduction gas cap is manufactured to exact factory specifications and dimensions offering an authentic appearance and bright...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1966-67 Chevy II, Nova; Fuel Tank Sending Unit; with 2bbl Carb; 5/16" Line
Reproduction of the original fuel tank sender unit designed specifically for 1966-67 Chevrolet Chevy II and Nova models with a 2 bbl carburetor with 5/16" line. Each sender is produced in quality steel to resist corrosion...
1968-69 Camaro Z28 Carb to Accelerator Lever Rod; 302 4 bbl
Reproduction accelerator pedal rod for 1968-69 Camaro Z/28 302 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is manufactured to correct...
1962-67 Chevy II, Nova; Fuel Tank Mounting Straps; Stainless Steel; Pair
Reproduction of the original gas tank straps designed for use with 1962-67 Chevy II and Nova models (except station wagon). Each strap is manufactured in quality stainless steel for long lasting dependability. Replace the...
1968-72 Chevy II Nova, Ventura; ; Fuel Tank Mounting Straps; EDP Coated Steel; Pair
Reproduction of the original style fuel tank mounting straps designed for use with 1968-72 Chevrolet Chevy II, Nova, and Pontiac Ventura models. Replace your original worn out gas tank straps with high quality reproductions....
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1968-70 Camaro, Firebird, Nova, Impala; Fuel Tank Vent Valve
Reproduction of the original gas tank vent valve that's installed on various 1968-70 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured in injection molded plastic to factory specifications. This commonly damaged...
1968-69 Camaro, Nova; Accelerator Throttle Arm V8; 307ci, 350ci, 396ci; w/o Cowl Induction
Reproduction of the original throttle arm designed for use on 1968-69 Camaro and Nova models. Each throttle arm is produced to replicate the original in quality and fit. Replace your worn out or damaged original throttle arm...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
1999-07 Chevy, GMC GMT800 Pickup; Fuel Filler Door & Hinge Assembly
Reproduction fuel filler door for 1999-2007 Chevrolet, GMC GMT800 Series pickup trucks. This fuel door is manufactured to correct factory specifications and includes the fuel door, spring, and bracket for a complete...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Reduce heat coming off of the intake with this reproduction carburetor base gasket with heat shield, installs between the carburetor and intake manifold. This gasket and shield was original equipment for most 1970 Chevrolet...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
Reproduction of the original fuel tank mounting straps designed for use with 1999-2006 Chevrolet, GMC C/K pickup truck, Silverado, and Sierra models with saddle mounted 26 gallon gas tank. Each strap is manufactured in...
Reproduction of the original OE rubber bumper for use with 1979-86 Chevrolet and GMC C/K pickup truck models, and 1987-91 Chevrolet and GMC R/V models. Also fits other areas of the vehicle including the heat exhaust shield,...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1967-72 Camaro, Firbeird, Nova; Fuel Tank Strap Mounting Bolt Kit ; 10 Piece Set ; Various Models
Reproduction of the original mounting bolts and hardware designed to install fuel tank mounting straps on various GM models. It's easy to replace the fuel tank straps when you have the right hardware. This set includes the...
1967-69 Camaro, Firebird,1968-72 Nova; Fuel Tank Sending Unit; with 3/8" Single Line
Reproduction fuel tank sending unit for 1967-69 Camaro and Firebird models, and 1968-72 Nova models with 3/8" line. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause your...
Correct reproduction of the original fuel tank designed for with 1968-69 Chevrolet Chevy II and Nova models. This reproduction fuel tank is manufactured in stainless steel and includes the fuel sender lock-ring and o-ring...
1962-67 Chevy II, Nova; Nitern Coated Fuel Tank; 16 Gallon
Correct reproduction of the original fuel tank designed for with 1962-67 Chevrolet Chevy II and Nova models. This reproduction fuel tank is manufactured in Nitern coated steel. This is a 16 gallon fuel tank that replaces the...
Reproduction clips used to mount the fuel line to the frame. Includes six 3/8" clips. Applications: 1967-69 Chevrolet Camaro - Big Block 1967-69 Chevrolet Camaro - Small Block w/4bbl 1965-86 Chevrolet/GMC Truck 1965-70...
1968-69 Chevy II, Nova; Zinc Coated Fuel Tank; 18 Gallon Tank
Correct reproduction of the original fuel tank designed for use with with 1968-69 Chevrolet Chevy II and Nova models. This reproduction fuel tank is manufactured in zinc coated stamped steel offering an original appearance...
1965-74 Holley; Carburetor Heat Shield; 4 Barrel with 396,454 Engine
OER® reproduction carburetor heat shield for all GM models with a Holley 4 bbl carburetor. This heat shield will help cool the intake charge for better performance. Original for 1970 396ci & 454ci with Special...
Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...
1968-69 327, 350 Carb to Accelerator Lever Rod; Small Block with 4 bbl Carb
Reproduction 1968-69 accelerator pedal rod for 327 or 350 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is manufactured to correct...
1965-1967 Chevy II / Nova; Fuel Tank Filler Neck; Zinc Coated; with Gasket
Reproduction of the original fuel tank filler neck designed for use on 1965-67 Chevy II and Nova models. If Each filler neck is manufactured in quality stamped steel featuring a zinc-plated coating for long-lasting rust and...
Correct reproduction of the original fuel tank designed for 1984-1988 Buick Regal, Chevrolet Monte Carlo, Oldsmobile Cutlass and other "G-Body" models. This reproduction fuel tank is manufactured in zinc coated steel to...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1962-65 Chevy II, Nova; Fuel Tank Sending Unit; with 2 bbl Carburetor; 5/16"
Reproduction of the original fuel tank sending unit designed for use with 1962-65 Chevrolet Chevy II and Nova sedan, hardrop, and station wagon models with 2 bbl carburetor with 5/16" line. Each sender is produced in quality...
1968-69 Camaro, Firebird; 1968-72 Nova; Fuel Tank Sending Unit; Single Line; 5/16"
Reproduction of the original fuel tank sending unit designed for use with 1968-69 Camaro and Firebird models, and 1968-72 Nova models with 5/16" line. After years of use, your fuel sending unit can wear out or stop working....
1983-85 Chevrolet S10, Blazer, GMC S15; Fuel Tank; without Filler Neck; 13.2 Gallons
Correct reproduction of the original fuel tank designed for 1983-1985 Chevrolet S10, S10 Blazer and GMC S15 Jimmy models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the...
1968-72 Chevy II, Nova, Ventura; Fuel Tank Mounting Straps; Stainless Steel; Pair
Reproduction of the original gas tank straps designed for use with 1968-72 Chevy II, Nova, and Pontiac Ventura Nova models. Each strap is manufactured in quality stainless steel for long lasting dependability. Replace the...
1962-67 Chevy II, Nova; Fuel Tank Mounting Straps; EDP Coated Steel; Pair
Reproduction of the original fuel tank mounting straps designed for use with 1962-67 Chevy II and Nova models (except station wagon). Each strap is manufactured in quality stamped steel, galvanized and EDP coated for long...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
1982-2002 Camaro, Firebird; Fuel Tank Mounting Straps; Stainless Steel; w/Rubber Inserts
Reproduction of the original style fuel tank mounting straps designed for use with 1982-2002 Camaro and Firebird models. Each strap is manufactured in quality stainless steel to original factory dimensions replicating the...
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
1965-67 Chevy II, Nova; Gas Cap; Black Primer
Correct reproduction of the original fuel cap for use with 1965-67 Chevy II and Nova models. This reproduction gas cap is manufactured to exact factory specifications and dimensions offering an authentic appearance and black...
1982-2002 Camaro, Firebird; Fuel Tank Mounting Straps; with Rubber Inserts; EDP Coated; Pair
Reproduction of the original style fuel tank straps designed for use with 1982-2002 Camaro and Firebird models. Each strap is manufactured using heavy duty EDP coated stamped steel material with insulators for an original...
1962-64 Chevy II, Nova; Gas Cap; Black Primer
Correct reproduction of the original fuel cap for use with 1962-64 Chevy II and Nova models. This reproduction gas cap is manufactured to exact factory specifications and dimensions offering an authentic appearance and black...