This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and Pontiac...
This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 65-70 Chevrolet Chevelle, Buick, Skylark, and Pontiac GTO models. These gearsets are heat treated...
Reproduction 4-speed shifter and linkage assembly for 1968-72 Chevelle, Malibu, and El Camino models, as well as 1970-72 Monte Carlo, equipped with a Muncie 4-speed transmission. Manufactured to factory specifications, this...
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick...
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 32 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fits various 1970-74 GM vehicles Including Chevrolet Chevelle, Buick...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...
Reproduction of the original style shifter arm for use with various 1964-67 Chevrolet models as listed below. This unique shifter arm is an excellent replacement for a damaged original shifter mechanism. Replaces the Muncie...
Reproduction 4-speed shifter handle for 1968-72 Chevrolet Chevelle and El Camino, 1970-72 Chevrolet Monte Carlo, and 1971-72 GMC Sprint models equipped with a factory center console. Manufactured to factory specifications,...
Reproduction 4-speed shifter handle for 1968-72 Chevrolet Chevelle and El Camino, 1970-72 Chevrolet Monte Carlo, and 1971-72 GMC Sprint models without a factory center console. Manufactured to factory specifications, this...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1964-67 Chevelle, El Camino, Clutch Bell Crank; Cross Shaft, Z-Bar; Big Block Engines
Reproduction of the original clutch bell crank for use with 1964-67 Chevelle & El Camino with big block engines. What the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
Highly polished triple chrome plated reproduction of the original chrome shift knob designed specifically for 1964-67 Chevelle, El Camino, Impala, Bel Air, Biscayne, Caprice, Chevy II Nova, and Malibu models with 1-3/4" dia....
Muncie 4-speed manual transmission shifter bracket for 1968-72 Skylark, Cutlass, Chevelle, El Camino and 1970-72 Monte Carlo models. This bracket is welded to the transmission crossmember and the shifter mounts to it. Used to...
1968-72 Chevrolet Chevelle, El Camino; 4-Speed Manual Transmission; Shifter Support Rod
Reproduction Muncie shifter loewer support rod 1968-72 Chevelle and El Camino models with manual transmission. This rod/support is 5 inches long and goes from the shifter to the crossmember to stabalize the shifter. Sold...
1958-83 GM; Clutch Bellcrank Pivot Ball; Block Side; Screw-In Type; 3" Overall Length
This is an exact reproduction of the original block side pivot ball screw designed for use with various 1958-83 GM models as listed. Each clutch bellcrank pivot ball is manufactured from hardened steel replicating the...
Shifter Install Kit; For Hurst Shifter and Muncie 452/453 Transmissions
Reproduction shifter installation kit required to fit a Competition Plus Shifter on various GM models including 1969-70 Chevy Nova models equipped with Muncie 452 or 453 transmissions. It will work with or without the factory...
1967-1971 GM; Various Models; Hurst 4-Speed Shift Knob; 1-3/4" with 3/8"-16 Thread; White
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This white shift knob is manufactured in quality ABS with a steel insert. This 1-3/4" shift knob can be installed on most factory shifters with the...
Reproduction of the factory Muncie 4-speed style shifter arm for various 1965-66 Chevrolet Impala. Bel Air, Caprice, and 1967 Chevelle, Malibu, and El Camino models. This unique shifter arm is an excellent replacement for a...
A reproduction installation set for use when installing a Hurst Competition Plus shifter on 1968 and earlier Muncie 451 transmission. See various applications listed. Can also be used for custom installs on various passenger...
Great reproduction 1968-1972 Chevelle, El Camino and 1970-72 Monte Carlo with manual transmission. This is a chrome shifter lever with "MUNCIE" embossed on the side. This is for applications with bucket seats and that do have...
Very good reproduction shift lever/arm 1968-1972 Chevelle, El Camino and 1970-72 Monte Carlo with manual transmission. This is a chrome shifter lever with "MUNCIE" embossed on the side. This is for applications that do not...
1964-67 Chevelle, El Camino, Clutch Bell Crank; Cross Shaft, Z-Bar; Small Block; 283ci, 327ci
Reproduction of the original cross shaft Z bar for use with 1964-67 Chevelle and El Camino models. What the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress...
1963-71 GM; Various Models; Hurst 4-Speed Shift Knob; 3/8" Thread; Black With Chrome Base
Reproduction shift knob used with GM 4 speed Hurst transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1967 Chevrolet Chevelle Models; Upper Clutch Rod; Pedal To Z Bar
This rod goes from the clutch pedal to the z-bar for 1967 Chevrolet Chevelle, El Camino upper clutch push rod. Replace the bent or just worn out rod with this great reproduction today. {specs} {fitment}
1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield
Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...
This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and...
1971-72 Chevelle SS, Monte Carlo; Speedometer; 120 MPH; White Markings
Reproduction speedometer for 1971-72 Chevelle and Monte Carlo models. Each gauge is manufactured to original specifications including the correct faceplate featuring white silkscreened markings that replicate the original in...
Reproduction clutch bell crank (Z-bar) pivot stud nylon seat and retainer set for 1958-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a manual transmission. These plastic inserts allow the clutch bell crank...
Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...
Reproduction Steering Lock Out Swivel Insulator Bushing for 1969-72 GM A-Body, F-Body, and X-Body vehicles. Keep your steering lock-out system tight and rattle-free. Don't let a worn or missing insulator ruin the precise feel...
Restore smooth, factory-correct steering lock-out operation in your '69?'72 GM A, F, and X-body and bring back the crisp, positive action of your classic GM column with this precision-formed Steering Lock-Out Swivel Spring....
Reproduction clutch bell crank (Z-bar) pivot stud seat retaining clip for various 1958-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a manual transmission. This clip installs on the frame side pivot stud...
Reproduction clutch bell crank (Z-bar) pivot stud nylon seat for various 1958-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a manual transmission. This precision-molded nylon insert installs into the...
1953-2010 GM; Rear Axle / Transmission Ventilator; for 3/8" Hole
OER® reproduction of the original style ventilator used by GM on a wide range of applications from the 1950s through present-day cars and trucks. This ventilator is designed for use on rear axle housings, automatic...
1964-67 Impala, Caprice, Nova; Muncie Shifter to Hurst Shifter Conversion Adapter Bracket
This bracket adapts a factory GM Muncie shifter arm to a Hurst Competition Plus shifter mechanism. Installing this bracket combines the classic look of an OE Muncie shifter with performance and reliability of a Hurst shift...
1963-74 Chevrolet; Retainer Clip; for Transmission Back-Up Switch Wire; Cushioned, Insulated
Replacement back-up lamp switch wire harness retaining clip for models with a muncie transmission. This clip mounts the reverse back-up lamp switch wire harness to the bellhousing. This is an exact reproduction of the...