1967-70 Camaro, Nova, Firebird; Bumper Jack Assembly & Base
Exact reproduction of the original bumper jack assembly for various GM models including Camaro, Chevy II, Nova, and Firebird models. Each component is designed to replace the original and includes the jack base, jack stand,...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
Reproduction of the original outer door mirror designed for use with various 1967-72 Chevrolet models. Each mirror is manufactured from durable die-cast zinc and finished to match factory specifications for a precise fit and...
Reproduction of the original outer door mirror designed for use with various 1968-72 GM models. Each mirror is precision-manufactured in high-quality die-cast zinc, replicating the original design, fit, and finish for an...
1962-1977 GM; Windshield Washer Jar Bracket; Various Models
OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...
This convertible is crafted from Stayfast, a heavy-duty three-ply composite canvass material. It consists of an acrylic square weave facing, rubber inner-layer, and cotton backing. Stayfast is a popular upgrade to vinyl...
This convertible is crafted from Stayfast, a heavy-duty three-ply composite canvass material. It consists of an acrylic square weave facing, rubber inner-layer, and cotton backing. Stayfast is a popular upgrade to vinyl...
1962-72 Chevrolet/Pontiac; OE Style Firewall Pad Fastener; Plastic; 7/16" X 1.50"; Various Models
Correct reproduction plastic firewall pad fastener for various GM models including 1967-69 Camaro, 1967-69 Firebird, 1962-72 Nova and 1962-69 Impala models. These fasteners are required to allow the firewall pad to attach...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
This convertible is crafted from Stayfast, a heavy-duty three-ply composite canvass material. It consists of an acrylic square weave facing, rubber inner-layer, and cotton backing. Stayfast is a popular upgrade to vinyl...
Reproduction of the original outer door mirror designed for use with various 1966-74 GM models. Each mirror is manufactured in premium die-cast zinc with a high-quality chrome-plated finish for an authentic OE-correct...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1965-69 Impala, Camaro, Nova, Firebird; Hood Hinge; LH; Driver Side
Reproduction of the original hood hinge assembly designed for various GM models. Each hood hinge is manufactured from stamped steel assuring a quality replacement. We recommend replacing the hood spring when installing a new...
This convertible is crafted from Pinpoint vinyl, a heavy-duty vinyl composite material. It consists of an outer layer of PVC and an inner layer of dyed, 100-percent-cotton sateen. This vinyl design is original to most...
This convertible is crafted from Pinpoint vinyl, a heavy-duty vinyl composite material. It consists of an outer layer of PVC and an inner layer of dyed, 100-percent-cotton sateen. This vinyl design is original to most...
This convertible is crafted from Pinpoint vinyl, a heavy-duty vinyl composite material. It consists of an outer layer of PVC and an inner layer of dyed, 100-percent-cotton sateen. This vinyl design is original to most...
This convertible is crafted from Pinpoint vinyl, a heavy-duty vinyl composite material. It consists of an outer layer of PVC and an inner layer of dyed, 100-percent-cotton sateen. This vinyl design is original to most...
This convertible is crafted from Pinpoint vinyl, a heavy-duty vinyl composite material. It consists of an outer layer of PVC and an inner layer of dyed, 100-percent-cotton sateen. This vinyl design is original to most...
This convertible is crafted from Pinpoint vinyl, a heavy-duty vinyl composite material. It consists of an outer layer of PVC and an inner layer of dyed, 100-percent-cotton sateen. This vinyl design is original to most...
This convertible is crafted from Pinpoint vinyl, a heavy-duty vinyl composite material. It consists of an outer layer of PVC and an inner layer of dyed, 100-percent-cotton sateen. This vinyl design is original to most...
This convertible is crafted from Pinpoint vinyl, a heavy-duty vinyl composite material. It consists of an outer layer of PVC and an inner layer of dyed, 100-percent-cotton sateen. This vinyl design is original to most...
1968-79 Camaro, Chevelle, Impala, Nova, Ventura; Rear License Plate Bracket; with Hinge; EDP Coated
Reproduction rear license plate bracket designed for various 1968-79 GM models. This authentic OE-style bracket is manufactured from quality stamped steel and includes a spring-loaded hinged door that allows access to the...
Reproduction convertible top motor engineered to deliver consistent hydraulic pressure and dependable operation. This unit makes it easy to raise and lower your power top by replacing a weak or worn out original. Each motor...
1964-65 Chevelle, GM A-Body; Convertible Top Header Bow
Reproduction convertible top header bow for various 1964-65 Buick, Chevrolet, Oldsmobile, and Pontiac A-body mid size models. Each header bow is manufactured to factory specifications replicating the original in design,...
Reproduction convertible top motor made to deliver consistent hydraulic pressure and dependable performance. Allows smooth raising and lowering of the power top. Each motor includes rubber mounts and features original style...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1966-1967 Camaro, Nova, Impala, Corvair; Remote Door Mirror Assembly; LH Driver Side; Various Models
Reproduction remote outer door mirror for various GM applications. Cable-operated design recreates the factory interior-controlled mirror for safer, hands-on-the-wheel adjustments. Built in quality zinc die-cast metal with a...
1970 Chevrolet Chevelle, Malibu; Chrome Front Bumper Guards; Impact Strips
1970 Chevrolet Chevelle, Malibu chrome front bumper guards with impact strips. Set includes 1 pair of chrome bumper guards and 1 pair of impact strips. Replaces GM part#'s 3968503, 3968504, 3968507. {specs} {fitment}
1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models
This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1963-67 Chevrolet, Oldsmobile, Pontiac; Hood Hinge Assembly; RH Passenger Side
Reproduction hood hinge assembly for various 1963-67 GM models. Each hood hinge is manufactured from stamped steel to factory specifications assuring a quality replacement. Features correct mounting points for ease of...
Reproduction chrome rear bumper for 1966 El Camino and Chevelle station wagon models. Each chrome bumper is manufactured to factory specifications and replicates the original in every detail. This reproduction bumper will fit...
1966 Chevelle, Malibu, El Camino; Front Bumper; Chrome: Replaces GM# 3869723
Reproduction chrome front bumper for 1966 Chevrolet Chevelle or El Camino models. Each bumper is manufactured to original specifications and replicates the original in every detail. This reproduction bumper will fit and...
1967 Chevelle, Malibu, El Camino; Front Bumper; Chrome; Replaces GM# 3884920
Reproduction chrome front bumper for 1967 Chevrolet Chevelle or El Camino models. Each bumper is manufactured to original specifications and replicates the original in every detail. This reproduction bumper will fit and...
1969 Chevrolet Chevelle, El Camino; Front Bumper Chrome; Replaces GM# 3926850
Reproduction chrome front bumper for 1969 Chevrolet Chevelle or El Camino models. Each bumper is manufactured to original specifications and replicates the original in every detail. This reproduction bumper will fit and...
Replace the worn or rusted out rear floating bow or rear tacking rail with this quality reproduction. This 1-piece tack strip, also referred to as a trimstick mounts to the frame just behind the quarter glass and secures the...
Reproduction chrome rear bumper for 1968 Chevelle models. Each bumper is manufactured to factory specifications and replicates the original in every detail. This reproduction bumper will fit and install exactly like the...
Reproduction chrome rear bumper for 1971-72 Chevelle and Malibu models. Each chrome bumper is manufactured to factory specifications and replicates the original in every detail. This reproduction bumper will fit and install...
Reproduction chrome rear bumper for 1968-72 El Camino, 1971-72 GMC Spriint and 1968 Chevelle station wagon models. Each chrome bumper is manufactured to factory specifications and replicates the original in every detail. This...
Reproduction chrome rear bumper for 1970 Chevelle and Malibu models. Each chrome bumper is manufactured to factory specifications and replicates the original in every detail. This reproduction bumper will fit and install...
1965 Chevelle, El Camino, Malibu; Front Bumper; Chrome; Replaces GM# 3856906
Reproduction chrome front bumper for 1965 Chevrolet Chevelle, Malibu, or El Camino models. Each bumper is manufactured to original specifications and replicates the original in every detail. This reproduction bumper will fit...
1965 Chevelle, El Camino, Malibu; Rear Bumper; Chrome; Replaces GM# 3858438
Reproduction chrome rear bumper for 1965 Chevrolet Chevelle, Malibu, or El Camino models. Each bumper is manufactured to original specifications and replicates the original in every detail. This reproduction bumper will fit...
1970 Chevelle; Malibu; Front Bumper; Stamped Steel; Chrome Plated; Replaces GM# 3954592
Reproduction chrome front bumper for 1970 Chevelle and Malibu models. Each bumper is manufactured to factory specifications and replicates the original in every detail. This reproduction bumper will fit and install exactly...
1966-67 Buick, Chevy, Olds, Pontiac; Lower Door Hinge Detent Set; 4 Piece Set
Reproduction of the original lower door hinge roller and bolt for use with 1966-67 Buick Special, Pontiac GTO, Lemans, Tempest 1967 Camaro, Firebird, and other various models as listed. The rollers are manufactured in quality...
Reproduction of the original outer door remote mirror assembly designed for the driver side of various GM models. Each mirror is precision manufactured from high-quality zinc die-cast metal and replicates the original factory...
1966-1967 Camaro, Firebird, F85, GTO, LeMans; Upper Door Hinge; RH or LH; Each
Reproduction upper door hinge designed for various Buick, Chevrolet, Pontiac, and Oldsmobile models, including 1967 Camaro and Firebird. Each hinge is manufactured in heavy-duty steel to ensure long-lasting strength,...
1966-67 Camaro, Firebird, Chevelle, GTO; Lower Door Hinge; LH; Drivers Side; Various Models
OER® reproduction of the original lower door hinge designed for use on various 1966-67 GM models. Each hinge is manufactured from heavy-duty cast material, accurately replicating the original in both quality and design....
1973-77 Chevrolet Malibu, Chevelle, El Camino; Fender Liner; Plastic; Pair
Replacement inner fender liner skirts for 1973-77 Chevrolet Malibu, El Camino and 1973-74 Chevelle models. These are the liners that mount in the front fender well. Replace the cracked, missing or warped fender liners today....
Reproduction back window glass for 1968-72 Chevrolet Chevelle 2-door sedan, Monte Carlo, and Grand Prix models. Replace scratched or damaged original with this OEM quality replacement. Each glass is professionally packed with...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
Reproduction windshield glass for various 1973-77 GM A-Body 4-door sedan and station wagon models. This windshield is manufactured with tempered laminate safety glass that meets the standard for protection against road...
1964-65 Chevrolet Chevelle, Malibu; 2 Door Hardtop; Back Glass; Light Green Tint
This premium reproduction back glass is designed for 1964-65 Chevrolet Chevelle Malibu 2 Door Hardtop models. Manufactured in factory-style green tinted glass to original specifications for an accurate fit and OE appearance....