1961-2002 Buick, Chevy, Pontiac, Oldsmobile; Inner & Outer Door Handle Bumper; Each; Various Models
Reproduction door handle bumper manufactured to factory specifications from correct rubber material to fit and function as original. This rubber bumper is designed to protect the sheet metal of the door where the outer door...
Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each
Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.
1967-69 Camaro, Firebird, 1968-79 Nova; Front Door Bumper; Each
Correct replacement front door rubber bumper for 1967-1969 Camaro, Firebird, 1967-70 Impala, Full Size, 1968-79 Nova, X body 4 door models. Each bumper is replicated to the original OE specifications and fits the door...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; Trunk Lid Rubber Bumper On Lid; Each; Various Models
Correct reproduction of the original trunk lid rubber bumper for use with various 1961-81 Buick, Chevy, Pontiac, and Oldsmobile models. Manufactured in EPDM rubber to factory specifications. Used to eliminate the trunk lid...
1959-79 Buick, Chevy, Pontiac, Oldsmobile; Seat Back Bumper; Oval Style; Each; Various Models
Reproduction of the original oval style seat back bumper designed for use on various 1959-79 GM vehicles. Each bumper is manufactured in hard rubber including a steel core for added strength. The bumper is installed where the...
1961-83 GM; Seat Back Rubber Bumper Stopper; Various Uses & Models; Each
Correct replacement of the rubber bumper for use on various GM models. This rubber stopper will help insure that your seat/hood is aligned properly. Sold individually. Use as required per vehicle. 1-3/16" long, diameter of...
1982-04 GM; Hood Adjustment Rubber Bumper & Bolt; 1" Diameter; Each; Various Models
Replace your original rubber hood adjuster stoppers with a correctly configured reproduction hood adjustment bumper. This part replace the adjuster bolt and the rubber bumper for a complete bolt-on replacement of the...
1968-81 Camaro, Impala, Firebird; Door Glass Guide Stop Bumpers; Pair; Various GM
Reproduction of the original door glass guide stop bumpers designed for use with various 1968-81 General Motors vehicles. These glass guide stops are required for proper door glass alignment. Commonly damaged during removal...
1991-96 Buick, Chevrolet; 1993-96 Cadillac; 1991-92 Oldsmobile; Hood Side Bumper; Each
OER reproduction of the original hood side anti-rattle bumper designed for use on 1991-96 GM models. Manufactured from quality molded rubber, each bumper is an exact replica of the original. Sold individually. Buick models...
1967-70 Impala, Full Size Passenger Cars; Door Bumper Set; 4-Piece
Reproduction door bumper set for 1967-70 Chevrolet full size car models including Impala, Caprice, Bel Air and Biscayne models. This is a set of 4 rubber bumpers.
1982-2012 GM Fuel Door; Door Pull Handle; Hood Stop; Sunroof. Rubber Bumper; Each; Various Models
Reproduction of the original style rubber bumper that fits a wide variety of 1982-2012 GM models and applications. Can be used for the fuel door, front and rear door pull handle, hood stop bumper, and sunroof control arm....
1987-2016 GM; Rear Trunk Lid Access Hole Plug; Each; Various Models
Reproduction trunk lid drain hole plug for 1987-2016 GM vehicles including 1991-96 Impala and Caprice models. Manufactured from molded rubber as original, these install on the underside of the trunk lid. Measures 9/165"...
1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models
Reproduction hood adjustment bumpers for various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated, or lost originals. Allows for a...
1961-79 GM; Bucket Seat Back Rubber Stopper Set; Round; w/Mounting Screws; Pair
Reproduction of the original seat back rubber stoppers designed for use on various 1961-79 GM models. These rubber stoppers help prevent rattling and keep the seat back positioned correctly. Replace worn out or missing seat...
1958-77 Buick, Chevy, Olds, Pontiac; Hood Adjust Bumper and Screw Set; Various Models
Reproduction hood adjustment bumpers for various 1958-77 GM models including 1967-69 Camaro and Firebird models. These 7/8" OD reproduction stoppers and screws are manufactured to original specifications to replace the worn...
1955-1976 Glove Box Door Arm Rubber Stopper
Reproduction of the original glove box door arm rubber stopper designed for use on various GM models. Eliminate the rattling and looseness of the glove box door by simply replacing the worn out or missing rubber glove box...
1991-96 Camaro, Impala, Caprice, Firebird; Trunk Lid Rubber Bumper, Each
Reproduction of the original trunk lid rubber stopper designed for use on 1991-96 GM vehicles including Camaro, Firebird, Impala, and Caprice models. Each bumper is manufactured in the correct configuration to fit exactly...
1980-90 Impala, Caprice, Bonneville; Hood Side Rubber Bumper; Each
Reproduction of the rubber hood side bumper designed for use on all 1980-90 Impala, Caprice, Bonneville and Pontiac Full Size models. Each rubber stopper is manufactured in the correct configuration from quality rubber same...
1955-1981 GM; Firewall Pad Fastener; Each
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
1962-70 Buick, Chevy; Pontiac, Oldsmobile; Control Arm Bumper; Rubber; Each; Various Models
Reproduction of the original control arm bumper designed for use on various GM models. Each bumper is manufactured to factory specifications in the correct configuration and includes a built in stud ensuring a perfect fit....
1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each
Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...
Reproduction rubber bumper for various GM applications. Each bumper is manufactured in EPDM rubber to factory specifications replicating the original in design and fitment. This bumper was used for various applications...
1966-1979 Camaro, Impala, Nova; Rubber Side Hood Bumper; Each
Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...
1938-91 GM; Consol & Glove Box Rubber Stoppers; Fits 1/4" Hole; Pair
Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...
1962-78 Nova, Camaro, Firebird, Impala, Truck; Speedometer Cable Firewall Grommet; w/Steel Insert
Quality reproduction of the original speedometer cable firewall grommet designed for use on various 1962-73 Chevy II Nova, Camaro, Impala, Bel Air, Biscayne, Caprice, Firebird, and 1973-78 Chevrolet, GMC truck models as...
1954-1981 GM; Hood Adjustor Rubber Bumper & Stud; Various GM Cars & Trucks
Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...
1970-90 GM; Lower Door Window Stop Bumper; Each; Various Models
Correct reproduction rubber stop bumper designed to keep the door glass from rolling down beyond the required travel point. Each stopper is manufactures from quality EPDM rubber and features a press fit retaining tab for easy...
1968-96 Impala, Chevelle, Corvette; Hood Rear Panel Bumper, Each, Various Models
Reproduction of the original rear hood panel bumper designed for use on various 1968-96 GM models. Exact reproduction of the original rear hood bumper used to replace the worn out or missing original. Manufactured to exact...
1977-2005 Buick, Chevy, Olds, Pontiac; Compartment Lid Rubber Bumper; Front or Rear; Each
Reproduction of the original rear compartment lid rubber stopper needed to prevent the rear compartment lid from slamming against the body. Each rubber bumper is manufactured in quality EPDM rubber that replicates the...
Reproduction of the original rubber stopper designed for use on the upper door section of the various GM models listed below. Each rubber stopper is manufactured to replicate the original in fitment and appearance. This...
1958-72 Buick, Chevy, Olds, Pontiac; Trunk Lid Rubber Stopper; Each; Various Models
Correct OER® reproduction of the original trunk lid rubber bumpers designed for use with various 1958-72 GM models. These rubber bumpers are engineered to replicate the factory originals in design, fit, and function. Each...
1970-87 Buick, Chevrolet, Olds, Pontiac; Upper Control Arm Bumper; Various Models; Each
Reproduction control arm bumper for Buick, Chevrolet, Oldsmobile, and Pontiac models. This upper control arm bumper is designed to replicate the factory original and is essential for proper suspension travel and ride control....
1982-93 Glove Box Door/Ashtray Bumper
Reproduction of the anti-rattle rubber bumper for the glove box door on 1982-85 Impala and 1982-93 Caprice models and for the ash tray on 1990 Caprice models. Measures 5mm in height and fits a 3mm hole. 2 required per...