1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1970-75 GM; Windshield Molding Clip; Each
Reproduction of the front and rear window molding clip for various 1970-74 GM models. Manufactured to factory specifications for proper fitment and function. Popular models and applications are listed below, but may fit...
1968 Impala, Bel Air, Biscayne, Caprice; Front Upper Grill
Reproduction of the original front upper grill for use on all 1968 Chevrolet Impala, Bel Air, Biscayne, and Caprice models except Impala SS-427. This grill is manufactured in quality, automotive-grade stamped aluminum to...
1967 Impala, Bel Air, Biscayne, Caprice; Front Grill Kit; Models without Corner Lamps
Reproduction front grill, headlight bezels, and trim for 1967 Chevrolet Impala and full size models (Except Impala SS). These authentic reproduction components are manufactured in quality stamped aluminum material to exact...
1967 Impala, Bel Air, Biscayne, Caprice; Front Grill Kit; models with Optional Corner Lamps
Reproduction of the original front grill, headlight bezels, and grill filler moldings designed for use with 1967 Chevrolet Impala (non SS), Bel Air, Biscayne and Caprice models. These authentic reproduction components are...
1968 Impala, Bel Air, Biscayne, Caprice; Front Lower Grill
Reproduction of the original front lower grill for use on all 1968 Chevrolet Impala, Bel Air, Biscayne, and Caprice models except Impala SS-427. This grill is manufactured in quality, automotive-grade stamped aluminum to...
1966 Impala, Bel Air, Biscayne; Upper Front Grill Assembly; Stamped Aluminum; OER
Reproduction stamped aluminum upper grill assembly for 1966 Chevrolet Impala, Bel Air, Biscayne and Caprice models. Each grill is reproduced to exact factory specifications using high grade quality aluminum that offers an...
1967 Impala, Bel Air, Biscayne, Caprice; Front Grill; OER
OER reproduction front grill unit for 1967 Chevrolet Impala (standard), Bel Air, Biscayne and Caprice models. This authentic reproduction is manufactured in quality stamped aluminum to exact factory dimensions replicating the...
1975-90 GM; Molding Clip; Nylon; 15.25mm x 30.5mm; Light Green
This reproduction nylon molding clip will provide a snug fit for the molding that is being attached to the vehicle. Popular applications are listed below, but may fit additional GM models. Fits a wide variety of GM...
1967-85 GM, 1967-81 Camaro, Firebird; Molding Clip Set; Front or Rear Window; Steel; Set of 24
Replacement windshield and rear window molding steel clips to fit a wide variety of applications on various GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary...
1966 Impala, Caprice; Hood Spear Molding; with Hardware
OER® reproduction of the original hood spear molding designed for use on 1966 Impala and Caprice models. Each molding is reproduced to exact specifications and manufactured in a polished zinc die-cast material for an...
1965-72 GM; Molding Clip Set; Windshield, Quarter, Back Window; 12-piece Set
Replacement style windshield molding installation clips for various GM models including, 1966-67 Chevy II and Nova and 1965-69 Impala and Full Size models. Each clip is designed and manufactured to replicate the OE style...
1965-67 Impala, Caprice 2-Door Hardtop; Windshield Molding Set; 5 Piece
Reproduction front windshield reveal molding set for 1965-67 Impala and 1966-67 Caprice models. Each molding is an exact replica of the original. Manufactured in polished stainless steel to factory specifications, each...
1966 Impala, Bel Air, Caprice; Wheel Openining Molding Kit; Front & Rear; with Hardware; Set of 4
Reproduction of the original wheel opening moldings designed for use on 1966 Impala Bel Air, and Caprice models. Each molding is stamped to original factory specifications with correct contours and finish for an original...
1966 Impala, Bel Air, Biscayne, Caprice; Lower Grill and Extensions; 3 piece Set
Reproduction of the original stamped aluminum lower grill designed for use on 1966 Impala, Bel Air, Biscayne and Caprice models. Reproduced to exact factory specifications using high quality aluminum material offering a...
1965-79 Buick, Chevrolet, Pontiac, Oldsmobile; Side Molding Clip; Each; Various Models
Correct style plastic stud mounted clip used on various 1965-79 GM vehicles. This clip was commonly used to attach the fender, door, and quarter panel side moldings on many GM vehicles. Also fits 1967-72 Chevrolet & GMC...
1972-75 GM Full Size; Wheel Well Molding; RH Front
Reproduction of the original wheel opening molding designed for use with 1972-75 Chevrolet full size models. Each molding is manufactured to factory specifications replicating the original GM molding exactly. OER reproduction...
1964-71 GM; Molding Clip Set; Windshield, Quarter, Back Window; OE Design; Each
Reproduction of the D-shaped windshield and rear window steel molding clip for various 1965-68 Chevrolet models. Manufactured to original OE factory specifications for proper fitment and function. Screw-on type. Use as...
1968-77 GM; Molding Clip; Windshield and Back Window Reveal Molding; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1980-90 Impala, Caprice; Front Wheel Opening Molding; 2 Door & 4 Door; LH Driver Side
Reproduction of the original wheel opening molding designed for use on 1980-85 Impala and 1986-90 Caprice models. Each molding is stamped in quality aluminum with correct countours for an authentic appearance and original...
1981-85 Chevrolet Caprice; Front Grill; Chrome Argent Silver
Quality reproduction of the original front grill assembly for use with 1981-85 Chevrolet Caprice models. Each grill is manufactured to original factory specifications replicating the original in appearance and fitment....
Reproduction front windshield and back window molding retainer clip set designed for use with a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is...
1991-96 Chevrolet Caprice; Front Grill; Chrome & Silver; w/o Fog Lamps;
Reproduction of the original front grill assembly designed for use with 1991-96 Chevrolet Caprice models without fog lamps. This grill is manufactured with injection molded ABS replicating the original in quality, design, and...
1967-72 GM; Molding Clip; Windshield or Back Window; Upper; Lower; Each
Reproduction of the D-Shaped front windshield or back window molding clip for various 1967-72 GM models. Manufactured to factory specifications for proper fitment and function. Use as required. Sold individually. Replaces OE...
1968-on GM; Molding Clip; Windshield, Quarter Window, Rear Window; Skylight; 14 Piece Set
Replacement style rear window glass molding installation clips for 1968-72 Chevy II and Nova models as well as a wide variety of additional GM models. Each clip is designed and manufactured to replicate the OE style clips...
Original style capped stud and clip nut designed to protect the owner from accidently cutting hands when reaching into areas like the trunk where the rear panel and quarter molding clips could cause harm. Most commonly used...
1972-85 GM; Molding Clip Set; For Windshield or Rear Window Molding; Steel; Set of 24
Reproduction windshield and rear window molding steel clip set to fit a wide variety of GM makes and models. Each clip set will provide a snug fit for the molding being attached. The amount of clips required for the job will...
1991-96 Caprice / Impala SS Grill Bracket; RH
Install your 1991-96 full size Chevy grill correctly with this original GM replacement grill mounting bracket.
All Years Chevrolet Caprice Rivet Head Bolt with Nut; Set of 25; Black
Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...
1962-76 Chevrolet, Buick, Oldsmobile; Rocker Molding Clip Set; with Screws; 24 Piece Set
This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water build up between the rail and...
1975-90 GM, 1977-79 Nova; GM X-Body; Glass Molding Clip Set; Nylon; 14 Piece Set
Replacement style window glass molding installation clips for 1977-1979 Nova and GM X-body. Fits a wide variety of applications on other GM models, too. Each clip is designed to replicate OE style clips providing a snug fit...
1967-72 GM; Molding Clip; Windshield or Back Window; Upper, Lower; 24 Piece Set
Reproduction of the D-Shaped front windshield molding clip for various 1967-on GM models. Manufactured to factory specifications for proper fitment and function. Use as required. Replaces OE #'s 7698976, 8736591. Sold as a...
1975-90 GM, 1977-79 Nova / X-Body; Windshield Molding Clip Set; Nylon Type; 14 Piece Set
Replacement style front window glass molding installation clips for a wide variety of GM models with nylon clips. Each clip is designed and manufactured to replicate the OE style clips providing a snug fit for the molding....
1980-87 GM; Molding Clip; For Rear Window Molding; Nylon; 7/8" X 1-1/5"; White; 24 pcs
Reproduction front window glass molding installation clip set for a wide variety of GM models with nylon clips. Each clip set is designed and manufactured to replicate the OE style clips providing a snug fit for the molding....
Reproduction set of 24-pieces of the D-shaped windshield and rear window steel molding clip for various 1966-70 GM models. Manufactured to original OE factory specifications for proper fitment and function. Use as required....
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1965-72 GM; Windshield, Back Window Molding Clip; Each
Reproduction of the original style rectangular-shaped front and rear window molding clip designed for use with various 1965-72 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured to factory specifications for...
1975-81 GM, 1975-88 AMC; Windshield/Back Glass Molding Clips; 1-1/2" Wide X 1/2" Tall; White Nylon
Reproduction front window glass molding installation clip for a wide variety of GM models with nylon clips. Each clip is designed and manufactured to replicate the OE style clip providing a snug fit for the molding. This clip...
1962-1976 GM; Rocker Panel Molding Retainer; Each
This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water buildup between the rail and rocker...
1959-68 Chevrolet; Grill Attaching Rivet with Nut; Silver Zinc Plating
Reproduction of the original style grill rivet and nut designed for use with various 1959-68 GM applications where a rivet was originally required to install the grill. Each rivet is designed to offer an authentic appearance...
1969 Impala, Bel Air, Biscayne, Caprice; Center Front Grill
OER reproduction center grill assembly for 1969 Impala/full size models. Each Injection molded grill is manufactured to exact original specifications featuring silver paint with black accents. Lower front grill available...
1965-66 Impala,1966 Caprice; Exterior Back Glass Molding Set; 2 Door Hardtop; Stainless; 5 Piece Set
OER® reproduction of the original back glass molding set designed for use on 1965-66 Impala and 1966 Caprice 2-door hardtop models. Each set of back glass molding is designed to replace the missing or damaged originals....
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1969 Impala, Bel Air, Biscayne, Caprice; Lower Front Grill
Reproduction of the original lower grill unit designed for use with 1969 Chevrolet Impala, Bel Air Biscayne and Full Size 2 & 4 door models. Each grill is manufactured to exact specifications featuring silver and black...
1975-81 GM, 1975-88 AMC; Windshield/Back Glass Molding Clip Set; 1-1/2" x 1/2"; White Nylon; 24 pcs
Reproduction front window glass molding installation clip set for a wide variety of GM models with nylon clips. Each clip set is designed and manufactured to replicate the OE style clip set providing a snug fit for the...
1986-90 Chevrolet Caprice; Front Grill Assembly
Reproduction of the original front grill assembly designed for use on 1986-90 Chevrolet Caprice models. Each grill is manufactured in injection molded ABS replicating the original in designed and appearance. Features a bright...
1977-79 Impala, Caprice; Rear Wheel Opening Molding; LH Driver Side
Reproduction of the original rear wheel opening molding designed for use on 1977-79 Impala and Full Size Chevrolet models. Each molding is manufactured to replicate the original in contour and fitment. Quality aluminum...
1965-72 GM; Windshield, Quarter, Back Glass Molding Clip Set; 25 Piece Set
Oldsmobile Windshield Molding Clips: 1965-1968 442 (except convertible) 1965-1968 Ninety-Eight (except convertible) 1965-1968 Cutlass (except convertible) 1965-1968 Delta 88 (except convertible) 1967-1968 Delmont 88 (except...
1980-90 Impala, Caprice, Cutlass, Lower Side Molding Clip; Each
Reproduction of the original lower side molding clip designed for use with various 1980-90 Caprice, Cutlass, Impala, and Parisienne models as listed. Each clips ia manufactured in quality injection molded nyton replicating...
1964-71 Chevrolet; Rear Glass Molding Clip Set; Square Style; 24 Piece Set
OER®replacement rear window glass molding clips for various GM models as listed. Each clip set includes 24 molding clips. Number of clips required may vary depending on the model. For individual clips (1), refer to part...
1964-76 GM; Molding Clip Set; Windshield/Rear Window; 10 pcs With Screws
Reproduction molding retainer clip set for a wide variety of 1964-72 GM models. Designed for emergency use, when a screw-on clip is required. Each clip is produced in spring steel to OE specifications and comes with phillips...
1959-1967 Grill Installation Rivet Head Bolt with Nut; Set of 25; Silver ; Various Models
Reproduction of th eoriginal grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and...
1964-71 GM; Molding Clip Set; Windshield, Quarter, Back Window; OE Design; 24 Piece Set
OER®reproduction of the OE style, rounded edge design, rear window glass molding clips for various GM models as listed. Each clip set includes 24 molding clips. Number of clips required may vary depending on the model....
1968-77 GM; Molding Clip; Windshield and Back Window Reveal Molding; Stamped Steel; 24 pcs
Reproduction windshield and rear window molding steel clip set to fit a wide variety of GM makes and models. Each set will provide a snug fit for the molding being attached. The amount of clips will vary depending on the...
1968-on GM; Molding Clip; Windshield, Quarter Window, Rear Window; Skylight; Each
Reproduction of the window molding clip for various 1968-72 GM models. Manufactured to factory specifications for proper fitment and function. Use as required. Sold individually. Replaces OE #'s 7730788, 8736585. Dimensions:...