1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1965-69 Impala, Camaro, Nova, Firebird; Hood Hinge; LH; Driver Side
Reproduction of the original hood hinge assembly designed for various GM models. Each hood hinge is manufactured from stamped steel assuring a quality replacement. We recommend replacing the hood spring when installing a new...
1970-81 Camaro, Firebird, 67, 69 Impala, Caprice, Hood Hinge Spring; Each; Various Models
Reproduction of the original hood hinge spring designed for use on various GM vehicles. Each spring is manufactured to replicate the original in quality and design. Will fit and install as original and features OE tension...
Reproduction of the original hood hinge assembly designed for use on various 1968-79 GM models. Each hood hinge is manufactured from heavy duty stamped steel assuring a quality replacement. We recommend replacing the hood...
1967-70 Camaro, 1965-68 Impala, Bel Air, Caprice, 1968 Chevelle; Hood Latch Pop-Up Spring
Reproduction hood pop-up spring for 1967-81 Camaro, 1965-68 Impala, Bel Air, Biscayne, Caprice, and 1968 Chevelle, El Camino models. Measures 3-3/4" long and features a black EDP coating for rust and corrosion prevention....
1971-75 Chevrolet and Oldsmobile; Hood Release Cable and Handle; 2 Piece Style
Reproduction hood latch release cable and handle assembly for 1971-75 Chevrolet and Oldsmobile models. This cable is manufactured to factory specifications and replicates the original in quality, design, and fitment. Includes...
1965-66 Impala, Bel Air, Biscayne, Caprice; Hood Latch Assembly; EDP Coated
Reproduction hood latch assembly for 1965-66 Chevrolet Impala and Full Size models. Each hood latch assembly is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...
Reproduction of the original hood hinge assembly designed for use on various 1970 Chevrolet models. Each hood hinge is manufactured in stamped steel to original factory specifications assuring a quality replacement. Finished...
1977-2005 Buick, Chevy, Pontiac, Oldsmobile;;Hood Latch Assembly; Various Models
Reproduction hood latch assembly for various 1977-2005 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed below. Each latch is designed as a direct replacement for the worn or inoperative original....
Reproduction of the original hood latch assembly designed for use with various GM models equipped with the release mechanism located inside the passenger compartment of the vehicle. Each hood latch is designed and...
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
1966 Impala, Bel Air, Biscayne, Caprice; Hood Latch Support; EDP Coated
Reproduction of the original hood latch support designed for use with 1966 Impala, Bel Air, Biscayne, and Caprice models. Each hood latch support is manufactured in stamped steel to original factory specifications, featuring...
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
1973-76, 1984-90; Chevrolet, Buick, Oldsmobile; Hood Latch Pop-Up Spring; Various Models
Reproduction hood pop-up spring for various 1973-76 and 1984-90 Chevrolet, Buick, and Oldsmobile models. Manufactured to factory specifications from spring steel. Features and Benefits: Authentic reproduction matching factory...
1977-87 Caprice, Impala, 1977-86 El Camino, Monte Carlo; Hood Latch Pop-Up Spring; Various Models
Replacement hood latch pop-up spring for multiple 1977-87 GM applications including 1977-87 Chevrolet Caprice, Impala and 1977-86 El Camino, Monte Carlo models. This is the spring that mounts to the hood latch and pops the...
Replacement black nylon 1-3/4" hood insulation retainer is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models...
1970-2002 GM; Hood Insulation Fastener; Each
Replacement black nylon hood insulation fastener is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models. It...
Reproduction hood hinge spring for various GM models including Chevelle, Camaro, Impala, Firebird and other various GM models. Each spring is designed and manufactured to exact factory specifications for the models listed...
1965-69 Impala, Camaro, Nova, Firebird; Hood Hinge; RH; Passenger Side
Reproduction of the original hood hinge assembly designed for various GM models. Each hood hinge is manufactured from stamped steel assuring a quality replacement. We recommend replacing the hood spring when installing a new...
1966-79 Buick, Chevy, Pontiac, Oldsmobile; Hood Hinge Spring; Each; Various Models
Correct replacement hood hinge spring designed for use with various 1966-79 GM models with a standard hood. Each hood hinge spring is manufactured in quality spring steel that matches the OE tension ratio. Overall length: 8...
Add a custom touch to your hood hinges with these brightly polished stainless steel hinge springs for various 1966-79 Chevrolet models with a standard hood. Each spring is manufactured to fit and function like the original...
1965-66 Impala, Bel Air, Biscayne, Caprice; Body Mount Bushing Set; 2 Door Hardtop & Sedan
Replacing the original bushings with rubber reproductions is a sure fire way to retain originality and maintain the subframe exactly the way the factory intended. Each bushing in this set is designed and manufactured to...
Reproduction of the original hood hinge assembly designed for use on various 1968-79 GM models. Each hood hinge is manufactured from heavy duty stamped steel assuring a quality replacement. We recommend replacing the hood...
Add a custom touch to your hood latch with this brightly polished stainless steel 4" pilot bolt assembly for 1967-81 Camaro, 1965-70 Impala, Bel Air, Biscayne, Caprice, and 1969-72 Chevelle models. Precision-engineered to...
1958-77 GM; Hood Adjuster Bolt and Nut Set ; 5/16"-18 x 1-3/8"; Various Models
Reproduction of the original hood stop bolt and nut set designed for use on various 1958-77 GM models. This bolt and nut set will keep the hood adjusted to the proper height. These 5/16"-18 x 1-3/8" bolts include the correct...
Reproduction hood latch release cable and handle assembly for 1971-90 Chevrolet Impala/full size models and various 1973-90 Buick, Oldsmobile, and Pontiac A-Body models. This cable is manufactured to factory specifications...
Reproduction of the original hood hinge assembly designed for use on various 1970 Chevrolet models. Each hood hinge is manufactured in stamped steel to original factory specifications assuring a quality replacement. Finished...
1965 Nova, 68 Impala, 67-72 Chevelle, 70-72 Monte Carlo; Hood Hinge Spring; Each
The hood hinge spring is an important part of the hood hinge assembly. Replace the old worn-out hood springs on your GM vehicle with this quality reproduction. Each spring is manufactured to original specifications and...
Universal Hood Pin Rubber Gasket; Each
Reproduction hood pin rubber gasket found on models with hood pins. Each gasket is die-cut to the proper dimension. This gasket will also fit a wide variety of aftermarket hood pins. Sold individually. Use as required. Check...
1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models
Reproduction hood adjustment bumpers for various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated, or lost originals. Allows for a...
1958-77 Buick, Chevy, Olds, Pontiac; Hood Adjust Bumper and Screw Set; Various Models
Reproduction hood adjustment bumpers for various 1958-77 GM models including 1967-69 Camaro and Firebird models. These 7/8" OD reproduction stoppers and screws are manufactured to original specifications to replace the worn...
1967-69 Camaro, Firebird; Hood Insulation Fastener Set; 20 Piece Set; Various Models
When it comes to restoring your GM classic, the smallest details often make the biggest difference. These reproduction hood insulation fasteners are the perfect finishing touch for your underhood restoration. Correct in every...
Universal Chrome Hood Pin Set; Flip-Over Style; with Landyards
Universal hood pin set for various models. Hood pins are necessary for the attachment of fiberglass or lift off hoods and may be installed for extra security on factory hoods. This universal style hood pin set includes pine,...
1965-81 Buick, Chevy, Pontiac, Oldsmobile; Hood Latch Pilot Bolt; 4"
OER® reproduction of the 4" hood latch pilot bolt for use on various GM models as listed below. The bolt is designed to attach to the lock plate retainer. Once installed, the hood pop-up spring surrounds this bolt....
Chrome Hood Pin Set; Hair Pin Style
Reproduction of the deluxe style hood pin set with hair pin design. Set includes all necessary components to replace the original hood pin including 2 hairpin style hood pins, 2 plates, 4 bolts and 8 mounting screws. Lanyards...
Universal Chrome Deluxe Hood Pin Set; Flip-Over Style; without Lanyards
Reproduction hood pin set with 1/4" "flip over" hood pin design. Set includes all necessary components to replace the original hood pin including 2 "flip over" style hood pins, 2 plates, 4 bolts and 8 mounting screws. Can be...
Hood Pin Kit; with Lanyard; Hair Pin Style; Universal Fit
Hood pins are necessary for the attachment of fiberglass or lift off hoods and may be installed for extra security on factory hoods. Each set uses the two piece hairpin style pins ideal for installations where a...
Hood Insulation Fastener Set; Nylon; 2" Square Head; 1/4" Stem Dia.; 9/16" Stem Length; 20 Piece Set
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement...
1963-72 Chevy, Pontiac; Hood Hinge Springs; Polished Stainless; RH & LH; pair; Various Models
Add a custom touch to your hood hinges with these brightly polished stainless steel hinge springs for 1963-64 Chevy II, Nova, 1967-69 Camaro SS 350 & 396 optioned hood, 1967-70 Firebird, 1963-66 Impala, Bel Air, Biscayne,...
Hood Pin Lanyard; Plastic Coated Cable; Universal Fit
Strong and ready for installation on any vehicle requiring hood pin lanyards. This design can be used for any muscle car or classic truck that requires lanyards for hood pin retention. Plastic coated design is strong and long...
1967-69 Camaro, Firebird; Plastic Clip Set; Radiator Support To Hood Seal; 9 Piece Set
Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...
1966-1979 Camaro, Impala, Nova; Rubber Side Hood Bumper; Each
Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...
1991-96 Impala, Caprice, GM Full Size; Rear Hood Cowl Outer Seals, Pair
Reproduction of the original rear hood outer corner rubber seals designed for use on 1991-96 Chevrolet Impala, Caprice and GM full size models. Each side seal is manufactured from durable EPDM rubber matching the original...
1968-96 Impala, Chevelle, Corvette; Hood Rear Panel Bumper, Each, Various Models
Reproduction of the original rear hood panel bumper designed for use on various 1968-96 GM models. Exact reproduction of the original rear hood bumper used to replace the worn out or missing original. Manufactured to exact...