1970-74 Various GM Vehicles; Gear Kit; Muncie M22; Close Ratio 2.20; 26 Spline; 26 Tooth
This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and Pontiac...
1965-70 Various GM Vehicles; Gear Kit; Muncie M22; Close Ratio 2.20; 10 Spline; 26 Tooth
This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 65-70 Chevrolet Chevelle, Buick, Skylark, and Pontiac GTO models. These gearsets are heat treated...
1967-68 Camaro; Floor Shifter Assembly; ITM Style; Muncie 4/Speed
Quality OER® reproduction ITM Style shifter assembly for 1967-68 Camaro models with 4-speed transmission. Assembly will replace worn or damaged originals. This shifter mounts to your crossmember just like the factory...
1970-74 Various GM Vehicles; Rebuild Kit; Muncie 4 Speed; M20, M212, M22
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 32 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fits various 1970-74 GM vehicles Including Chevrolet Chevelle, Buick Skylark,...
1966-70 Various GM Vehicles; Rebuild Kit; Muncie 4 Speed; M20, M21, M22
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick Skylark, and...
1982-02 Camaro, Firebird; Round Shift Knob; Leather Wrapped; Manual Trans; Black
Reproduction of the factory original leather-wrapped shift ball to fit various 1982-02 Camaro Z28 and Firebird models equipped with 5-speed and 6-speed manual transmissions. Each reproduction shift ball is manufactured in...
1970-81 Camaro / Firebird Upper Floor Shift Boot, with Manual Trans
Reproduction of the original upper shift boot designed for use on 1970-81 F-Body models with manual transmission. Each boot is manufactured in quality molded rubber to replicate factory specifications and provide an original...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction of the original style heavy weight chrome shift knob designed for use on high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...
1958-70 GM; Various Models; Muncie 4-Speed Shift Knob; 1-3/4" With 5/16"-18 Thread; Black
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
1982-86 Camaro, 1991-99 Camaro, 1982-83 Firebird; Shift Knob Ball; with Manual Transmission; Black
Correct reproduction shift knob for 1982-86 Camaro, 1991-99 Camaro, and 1982-83 Firebird / Trans Am models. Each knob is manufactured to correct factory dimensions replicating the original shift knob in design, appearance,...
1967 F-Body Frame Side Clutch Pivot Ball Bracket
OER® Reproduction of the frame side clutch pivot ball bracket. Features the correct offset and holes as original and is used for L6, small block and big block models. Applications 1967 Camaro 1967 Firebird You...
This is The plastic clutch bell crank or Z bar insert set that allow the bar to pivot. These are present on most all GM cars from 1958-88 with a manual transmission. This four piece set which includes 3 nylon bushings and a...
1969 Camaro, 1968-69 Firebird; Floor Shifter Assembly; with 4 Speed Hurst
Reproduction of the original style Hurst 4 speed shifter designed for use on 1968-69 Firebird, and 1969 Camaro models with a Muncie transmission. This assembly will replace worn or damaged original shifter assemblies. This...
1967-68 Camaro; Floor Shifter Assembly; with Saginaw 4/Speed; ITM Style;
Reproduction of the original ITM Style shifter assembly for 1967-68 Camaro models with a Saginaw 4-speed transmission. Each shifter is manufactured to factory specifications for an authentic appearance and fitment Mounts to...
1958-83 GM; Block Side Pivot Ball; Screw-In Type; Reproduction
This is an exact OER® reproduction of the original block side pivot ball screw designed for use with various 1958-83 GM models as listed. Each pivot ball is manufactured from hardened steel replicating the original in...
1967-69 Camaro Floor Shift Boot, without Console, Manual Trans
Reproduction of the original floor shift boot for use on all 1967-68 Camaro 3 and 4 speed models without center console. Also fits 1969 Camaro 3 speed models without center console. The lower boot is manufactured from quality...
1967-68 Camaro; Shifter Stabilizer Bar
OER® Authorized reproduction of the shifter stabilizer rod also known as the front strut rod transmission mounting bracket for 1967-68 Camaro models. This stabilizer rod goes from the shifter assembly to the transmission...
1967-1971 GM; Various Models; Hurst 4-Speed Shift Knob; 1-3/4" with 3/8"-16 Thread; White
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This white shift knob is manufactured in quality ABS with a steel insert. This 1-3/4" shift knob can be installed on most factory shifters with the...