This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and Pontiac...
This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 65-70 Chevrolet Chevelle, Buick, Skylark, and Pontiac GTO models. These gearsets are heat treated...
1967-68 Camaro; Floor Shifter Assembly; ITM Style; Muncie 4/Speed
Quality OER® reproduction ITM Style shifter assembly for 1967-68 Camaro models with 4-speed transmission. Assembly will replace worn or damaged originals. This shifter mounts to your crossmember just like the factory...
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick...
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 32 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fits various 1970-74 GM vehicles Including Chevrolet Chevelle, Buick...
1970-81 Camaro, Firebird; Upper Floor Shift Boot, with Manual Trans
Reproduction of the original upper shift boot designed for use on 1970-81 F-Body models with manual transmission. Each boot is manufactured in quality molded rubber to replicate factory specifications and provide an original...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...
1982-02 Camaro, Firebird; Round Shift Knob; Leather Wrapped; Manual Trans; Black
Reproduction of the factory original leather-wrapped shift ball to fit various 1982-02 Camaro Z28 and Firebird models equipped with 5-speed and 6-speed manual transmissions. Each reproduction shift ball is manufactured in...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
1982-86 Camaro, 1991-99 Camaro, 1982-83 Firebird; Shift Knob Ball; with Manual Transmission; Black
Correct reproduction shift knob for 1982-86 Camaro, 1991-99 Camaro, and 1982-83 Firebird / Trans Am models. Each knob is manufactured to correct factory dimensions replicating the original shift knob in design, appearance,...
1967 F-Body Frame Side Clutch Pivot Ball Bracket
OER® Reproduction of the frame side clutch pivot ball bracket. Features the correct offset and holes as original and is used for L6, small block and big block models. Applications 1967 Camaro 1967 Firebird You are assured...
1969 Camaro, 1968-69 Firebird; Floor Shifter Assembly; with 4 Speed Hurst
Reproduction of the original style Hurst 4 speed shifter designed for use on 1968-69 Firebird, and 1969 Camaro models with a Muncie transmission. This assembly will replace worn or damaged original shifter assemblies. This...
1970-74 Camaro, Firebird; Muncie Reverse Lock Out Linkage Set; 4 Speed; Small, Big Block
Reproduction of the original style lock out linkage set for 1970-74 Camaro and Firebird models with Muncie 4-speed transmissions. Designed for use with small block or big block models. Includes fully assembled bellcrank,...
1967-1971 GM; Various Models; Hurst 4-Speed Shift Knob; 1-3/4" with 3/8"-16 Thread; White
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This white shift knob is manufactured in quality ABS with a steel insert. This 1-3/4" shift knob can be installed on most factory shifters with the...
1967-69 Camaro; Floor Shift Boot, without Console; Manual Trans
Reproduction of the original floor shift boot for use on all 1967-68 Camaro 3 and 4 speed models without center console. Also fits 1969 Camaro 3 speed models without center console. The lower boot is manufactured from quality...
1982-92 Camaro, Firebird; Lower Shift Boot; T-5; 5-Speed
Reproduction of the original lower shifter boot for use with 1982-1992 Camaro and Firebird models. Manufactured to factory specifications with pre-punched mounting holes. This is the lower boot that is bolted to the shift...
1963-71 GM; Various Models; Hurst 4-Speed Shift Knob; 3/8" Thread; Black With Chrome Base
Reproduction shift knob used with GM 4 speed Hurst transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
Hurst Quarter Stick shifter and Dual Gate Shifter Arm transmission select lever for 1967-92 Camaro and Firebird using a Trubo-Hydramatic 350 or 400 tranmissions. using Hurst Quarter Stick shifter 3160001, 3160006 and 3160016,...
1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield
Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...
This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and...
1967-69 Camaro, 1968-73 Nova; Floor Shift Boot, with Floor Console, Manual Transmission
OER reproduction of the original floor shift boot manufactured in quality molded rubber replicating the original GM boot in authenticity and fitment. Originally installed on all 1967-68 Camaro models with 4 speed trans, 1969...
1970-81 Camaro, Firebird; Gearshift Boot Retainer Plate; for Manual Trans; Black
Reproduction shift boot retainer plate for 1970-81 Camaro and Firebird models with 3-speed or 4-speed manual transmissions. Each gearshift boot retainer plate is manufactured in stamped steel replicating the original design...
1970-81 Camaro, Firebird; Lower Shift Boot Seal; with Manual Trans
Reproduction of the original lower shift boot seal designed for use with 1970-81 Camaro and Firebird models with manual transmissions. Each boot is manufactured in quality EPDM rubber replicating the original in design,...
Reproduction clutch bell crank (Z-bar) pivot stud nylon seat and retainer set for 1958-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a manual transmission. These plastic inserts allow the clutch bell crank...
1967-70 Camaro; Shift Plate Retainer; without Floor Console; with Manual Transmission
Reproduction of the original GM shift boot and plate retainer for use on all 1967-70 Chevrolet Camaro models 4 speed manual transmissions without a floor console. This retainer is manufactured in stamped steel and used to...
Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...
Reproduction Steering Lock Out Swivel Insulator Bushing for 1969-72 GM A-Body, F-Body, and X-Body vehicles. Keep your steering lock-out system tight and rattle-free. Don't let a worn or missing insulator ruin the precise feel...
Restore smooth, factory-correct steering lock-out operation in your '69?'72 GM A, F, and X-body and bring back the crisp, positive action of your classic GM column with this precision-formed Steering Lock-Out Swivel Spring....
1966-72 Pontiac, 1968-69 Firebird,1969 Camaro; Hurst Floor Shift Boot; 3 or 4 Speed; Manual Trans
Reproduction of the original shift boot designed for use with 1969 Camaro and 1968-69 Firebird models with 4 speed Hurst shifters. Each shift boot is designed and manufqactured in quality EDPM rubber that matches the original...
1975-81 Camaro, Nova, Corvette, Firebird; Clutch Flywheel Housing Cover; Manual Trans; T10; OER
Reproduction of the original clutch flywheel housing cover designed for use on various 1975-81 GM vehicles with Borg Warner T-10 manul transmissions. This cover is used to protect the clutch flywheel housing for vehicles with...
1970-81 Camaro, Firebird; Gearshift Boot Retainer Plate; Manual Transmission; Chrome Plated
Reproduction shift boot retainer plate for 1970-81 Camaro and Firebird models with 3-speed or 4-speed manual transmissions. Each gearshift boot retainer plate is manufactured in stamped steel replicating the original design...
1969 Camaro Hurst Shifter Lever Hardware
Reproduction of the original 1969 Camaro Hurst shift lever hardware designed to replace broken, damaged or worn out originals. Includes high strength steel bolts and washers as shown.
1967-74 Upper Clutch Push Rod Boot - Various Models
This OER® reproduction of the original upper push rod molded rubber boot is manufactured using correct E.D.P.M. rubber compound stock that is superior to the original. Molded in steel insert distributes mounting screw...
1969 Camaro; Console Shift Tunnel; with 4 Speed Manual Trans
Reproduction of the original black plastic tunnel located directly below the shift plate and extends downward to the rubber shift boot. This reproduction is manufactured in a precision injection molded black injection molded...
Clutch Linkage Kit ; 1967 Camaro Big Block, 1967 Firebird V8
Reproduction of the original components needed to replace the clutch linkage on 1967 Camaro big block models, and 1967 Firebird V8 models. You'll be pleased with this all new pre-packaged clutch linkage set. Whether replacing...
1967 Camaro, Firebird Clutch Linkage Set ; Small Block; V8
Reproduction of the original components needed to replace the cluch linkage on 1967 Camaro small block and 1967 Firebird (L6) models. You'll be pleased with this all new pre-packaged clutch linkage set. Whether replacing worn...
Reproduction of the original Hurst-type shift boot retainer plate installed on various GM models including 1969 Chevrolet Camaro models equipped with 4-speed Hurst shifters. Works with both original and reproduction Hurst...
OER® reproduction of the original console seal cover originally installed on 1967 Camaro, 1967 Firebird or 1968-72 Chevy II/Nova models with a factory 3 or 4-speed manual transmission. Each seal is manufactured to exact...
1968-69 Camaro; Console Shift Plate Emblem; with 3/Speed; Manual Trans
OER® reproduction of the original 3-speed shift pattern emblem designed for use with 1968-69 Camaros 3-speed manual transmissions. This shift pattern plate is manufactured in die-cast zinc and features correct 3-speed...
1970-81 Clutch Bellcrank Pivot Ball Bracket ; Frame Side ; Camaro. Firebird
OER® reproduction of the original frame side clutch bellcrank pivot ball bracket designed for use on 1970-81 Camaro and Firebird models with manual transmissions. This steel bracket attaches to the vehicles frame....
1953-2010 GM; Rear Axle / Transmission Ventilator; for 3/8" Hole
OER® reproduction of the original style ventilator used by GM on a wide range of applications from the 1950s through present-day cars and trucks. This ventilator is designed for use on rear axle housings, automatic...
1968-69 Camaro; Console Shift Plate Emblem; with 4 Speed; Manual Trans
OER® reproduction of the original 3-speed shift pattern emblem designed for use with 1968-69 Camaros 4-speed manual transmissions. This shift pattern plate is manufactured in die-cast zinc and features correct 4-speed...
1972-81 Camaro; Clutch Linkage Set; Small block & Big Block
Reproduction of the original clutch linkage components designed to replace the clutch linkage on 1972-81 Camaro small block or big block models. Each comprehensive clutch linkage set includes the necessary components to...
1963-74 Chevrolet; Retainer Clip; for Transmission Back-Up Switch Wire; Cushioned, Insulated
Replacement back-up lamp switch wire harness retaining clip for models with a muncie transmission. This clip mounts the reverse back-up lamp switch wire harness to the bellhousing. This is an exact reproduction of the...