1969 Chevy Camaro; Exterior Paint Seal Set; Standard & RS Models
A complete set of reproduction exterior gaskets designed for use on 1969 standard or RS Camaro models. Each set is designed to replace the gaskets for the door handles, tail lights, back-up lights, side markers, mirror...
1967-68 Camaro RS; Molded Rubber Tail Lamp & Park Lamp Lens Gasket Set; OE Style; Light Gray
Reproduction exterior lens gaskets to replace the old or worn out originals on 1967-68 Camaro Rally Sport models. This replacement gasket set includes both rear tail light lens to housing gaskets, the rear license lamp...
1984-92 Chevrolet Camaro; Tail Lamp to Quarter Panel Weatherstrip Filler Set; Pair
Reproduction tail lamp-to-quarter panel filler weatherstrip seal set for 1984-92 Chevrolet Camaro. Each set of hockey stick shaped molded rubber fillers fill the gap between the quarter panel and the tail lamp lens on both...
1955-90 Buick, Chevrolet, Pontiac, Oldsmobile; Door Lock Gasket; Each; Various Models
Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...
1970-81 Camaro, Firebird; Door Frame Weatherstrip Seals; with Molded Ends; Pair
This reproduction door frame weatherstrip set installs on the outer frame of the door on 1970-1981 Camaro and Firebird models. Manufactured in the correct configuration for an easy, factory style installation, it is the...
1970-81 Camaro, Firebird; Roof Rail Weatherstrip, Coupe, Pair; OER
These reproduction roof rail weatherstrips are designed for 1970-81 Camaro and Firebird coupe models and are manufactured to the correct factory configuration to seal the area between the roof rail and the door glass....
1964-79 Camaro, Chevelle, Firebird, Nova, X-Body; Outer Door Handle Gasket Set; Various Models
Reproduction of the original outer door handle gasket set designed to properly seal the exterior door handles on various classic vehicle applications. Each set includes precision die-cut gaskets manufactured to factory...
1966-72 GM; Outer Mirror Mounting Set ; LH or RH ; Gasket, Bracket, Screws
Reproduction of the original style components required to replace and mount the outer door mirror on the door. Contains all the necessary hardware to install a standard outer door mirror onto either the drivers or passenger...
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
1970-73 Camaro; Trunk Lock Bezel Gasket ; Molded Rubber
Correct OER® reproduction of the original trunk lock bezel molded rubber gasket for use with all 1970-73 Camaro models. This molded gasket is used to seal the trunk lock bezel and help keep water and other elements from...
1967-69 Camaro, 1968-72 Chevy II, Nova; Hood Louver Gasket; Each
Reproduction of the original hood louver gaskets that seal the hood louvers to the hood. These gaskets are manufactured to precisely replace the old or worn originals. Prevents water and other elements from seeping past the...
1978-81 Chevy Camaro; Tail Light Housing to Body Gasket; Molded Rubber; RH Passenger Side
Reproduction of the original tail lamp gasket designed for use on all 1978-81 Camaro models. The gasket is manufactured in molded rubber ensuring a quality replacement. The gasket acts as a cushion between the tail light...
1966-72 Chevrolet; Standard Door Mirror Gasket
Quality reproduction outer door mirror gasket for various GM models. Manufactured to factory specifications in quality injection molded ABS, will fit original GM or reproduction mirrors. Installs between the mirror base and...
1967 Camaro, Firebird; Vent Frame Weatherstrip, RH and LH; Pair
Correct molded reproduction of the original vent frame weatherstripping designed for use on 1967 Camaro and Firebird models. Designed and manufactured to exact factory specifications, each weatherstrip will replace the...
1982-92 Camaro, Firebird; Roof Rail Weatherstrip, Coupe; with Molded Ends; Pair; OER
Reproduction of the original roof rail weatherstrip designed for use on 1982-92 Camaro and Firebird coupe models. These quality weatherstrips are manufactured to the correct factory configuration and seal the area between the...
1967 Camaro, Firebird; Convertible Pillar Post Weatherstrip; Molded; Pair
Quality reproduction of the original pillar post weatherstrip designed for use on 1967 Camaro and Firebird convertible models. Each weatherstrip is manufactured from durable E.P.D.M weatherstrip for authenticity and fit. This...
1988-92 Camaro, Firebird; Lower Door Weatherstrip Seal; RH or LH; Each
Reproduction of the original weatherstrip seal that fits onto the bottom of the door and acts as an auxiliary weatherstrip protecting water or elements from entering the passenger area. The door frame weatherstrip works in...
1967-81 Camaro, Firebird; Trunk Weatherstrip Seal; OER
Reproduction trunk weatherstrip for 1967-81 Camaro and Firebird models. Each rubber weatherstrip measures 13-1/2 feet in length, and is manufactured with correctly configured extruded rubber. The weatherstrip is extruded to...
1970-81 Camaro, Firebird, 1973-74 Nova; Outer Door Bullet Mirror Gasket; RH or LH; Each
Correct reproduction of the original outer door bullet mirror gasket designed for use on various GM models as listed. This gasket separates the mirror base from the outer door metal. For use with bullet style mirrors in the...
1967-69 Camaro, Firebird; Quarter Window Vertical Weatherstrip; with OE Style Steel Insert; Pair
Superb quality reproduction of the original side quarter window vertical weatherstrip designed for use on all 1967-69 Camaro and Firebird models. Manufactured in quality EPDM rubber to exact factory dimensions. These...
1970-88 Buick, Chevrolet, Oldsmobile, Pontiac; Outer Door Handle Gasket; LH or RH; Each
Reproduction of the original outer door handle gasket designed for use with 1970-81 GM F-Body and 1973-88 GM G-Body models. This gasket installs on the backside of the exterior door handle to provide a protective barrier...
1967-68 Camaro; Upper Fuel Tank Neck Rubber Sleeve
Reproduction upper fuel tank neck rubber sleeve for 1967-68 Chevrolet Camaro models. This reproduction rubber sleeve surrounds the gas tank neck and protects against gasoline, water or other elements causing possible damage...
1962-81 Trunk Lock Cylinder Gasket ; Die-Cut Replacement
Reproduction die-cut trunk lock cylinder gasket designed to seal the trunk lock cylinder to the body. This gasket is designed for use on the listings below. Each gasket will fit and function as original. This is a non-molded...
1967-68 Camaro, Firebird; Front Fender Inner Splash Apron Set
Reproduction inner splash apron set designed for 1967-68 Camaro models. These splash shields are essential for maintaining the proper seal between the fender skirt and engine bay, helping to keep the engine compartment...
1978-81 Chevy Camaro; Tail Lamp Housing To Body Gasket; Molded Rubber; LH Drivers Side
Reproduction of the original tail lamp gasket designed for use on all 1978-81 Camaro models. The gasket is manufactured in molded rubber ensuring a quality replacement. The gasket acts as a cushion between the tail light...
1969 Camaro; Inner Fender Splash Apron Set
Reproduction inner splash apron set designed for 1969 Camaro models. These splash shields play an important role in maintaining the seal between the fender skirt and engine bay, helping to protect the engine compartment from...
1970-81 Camaro / Firebird Standard Mirror Gasket ; with Chrome Mirror
Correct reproduction of the original standard outer door mirror gasket originally installed on all 1970-81 models with chrome mirrors. Manufactured in injection molded ABS to factory specifications. Fits left or right hand...
1958-75 Clutch Bellcrank Felt Seals ; Pair
OER® reproduction of the original die-cut felt seals that slips over the bellcrank pivot studs and seals against the end of the bellcrank tube to prevent dirt and water damage. Manufactured to correct dimensions. Sold in...
1970-81 Camaro, Firebird, Nova, Ventura; Upper Clutch Push Rod Boot; Various Models
OER® reproduction upper clutch push rod boot for various 1970-81 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each boot is manufactured using high-quality EPDM automotive-grade rubber to replicate the original in...
1970-73 Camaro; Rear Bumper Rubber End Fillers; Pair
Reproduction of the original style rear bumper rubber fillers designed for use with 1970-73 Camaro models. These bumper fillers are manufactured in EPDM rubber and replicate the original design and configuration for an...
1968-69 Camaro RS Headlight Door Actuator Boot; Rubber Dust Boot
Reproduction of the original door actuator rubber boot designed for use on 1968-69 Camaros with concealed headlamps. This rubber boot is designed to protect the vacuum actuator assembly. 2 required per vehicle.
1970-81 Camaro, Firebird; Front Fender Skirt Splash Apron Set; RH & LH; Pair
Replace worn or missing splash aprons with this factory-style reproduction set and restore proper protection to your engine bay. Each apron is manufactured to original specifications, designed to seal the space between the...
1968-76 Remote Outer Door Mirror Gasket ; Various Models
Reproduction of the original outer door remote mirror mounting gasket for use with the various applications listed. Each gasket is manufactured to replicate the original is fitment and design. Can be used with the original...
1955-79 Outer Door Handle Push Button O-Ring Gasket ; Each
This door handle O-ring is one of the most overlooked replacement parts on any vehicle. The O-ring inserts onto the outer door handle push button and eliminates rattling and wear between the handle and the push button....
1966-1979 Camaro, Impala, Nova; Rubber Side Hood Bumper; Each
Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...
1967-69 Camaro, Firebird; Interior Door Jamb Rubber Seals; Pair
Correct OER® reproduction of the 1967-69 style original molded rubber seals that attach to the door jamb section directly below the rear side window vertical weatherstrip. These reproduction door jamb seals are...
Reproduction license plate / fuel door stoppers for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note: REV. 5-80 (cut 1/4"...
1967-74 Upper Clutch Push Rod Boot - Various Models
This OER® reproduction of the original upper push rod molded rubber boot is manufactured using correct E.D.P.M. rubber compound stock that is superior to the original. Molded in steel insert distributes mounting screw...
1962-78 Nova, Camaro, Firebird, Impala, Truck; Speedometer Cable Firewall Grommet; w/Steel Insert
Quality reproduction of the original speedometer cable firewall grommet designed for use on various 1962-73 Chevy II Nova, Camaro, Impala, Bel Air, Biscayne, Caprice, Firebird, and 1973-78 Chevrolet, GMC truck models as...
1976-78 Firebird, 1978 Camaro; Hurst T-Top Weatherstrip Set; 4 Piece Set
High quality reproduction of the original Hurst style T-top weatherstrip designed for 1978 Camaro, and 1976-78 Firebird models. This weatherstrip was installed on 1976 to 1st design 1978 models. Manufactured from molded and...
1954-1981 GM; Hood Adjustor Rubber Bumper & Stud; Various GM Cars & Trucks
Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...
1970-81 Camaro, Firebird; Fender and Spoiler Welting Seal ; 32" ; Various Models
This special front fender and front spoiler welting is designed to help to seal fender flares or front spoiler extensions to the body. Although the configuration can vary from model to model, this welting can be used...
1970-81 Camaro, 1977-81 Firebird; Hood To Cowl Seal ; 3 Piece Set
Correct reproduction of the original style weatherstripping which attaches to the cowl top vent grill and seals the area between the hood and the cowl panel. This is a correct reproduction of the original seal that includes...
1982-92 Camaro, Firebird; Door Corner Filler Weatherstrip; RH Passenger Side
Reproduction of the original weatherstripping for 1982-92 Camaro and Firebird models. This weatherstrip attaches to the plastic corner filler at the front of the side windows on all 1982-92 models. Each weatherstip is molded...
1967-68 Camaro RS; Park Light & Back Up Light Paint Seal Gasket Supplement; 4 Piece Set
Supplimental paint seal set designed for use on 1967-68 Camaro Rally Sport models. Set includes the 1967 front park lamp housing to body gaskets and 1967-68 back-up lamp housing to body gaskets. Each gasket replicates the...
Correct reproduction of the original power window harness rubber boots which is used to house the power window wiring harness as it passes between the door jamb and door area. This rubber boot is manufactured in durable...
OER® reproduction of the original console seal cover originally installed on 1967 Camaro, 1967 Firebird or 1968-72 Chevy II/Nova models with a factory 3 or 4-speed manual transmission. Each seal is manufactured to exact...
1967-69 Camaro, Firebird; Door Jamb Welt Retainer Clips; Pair
Reproduction of the original spring steel door jamb windlace retaining clips for 1968-69 Camaro, Firebird models. These clips are a direct replacement for the commonly damaged or missing originals. Includes drivers and...
Reproduction of the original rubber stopper designed for use on the upper door section of the various GM models listed below. Each rubber stopper is manufactured to replicate the original in fitment and appearance. This...
1958-72 Buick, Chevy, Olds, Pontiac; Trunk Lid Rubber Stopper; Each; Various Models
Correct OER® reproduction of the original trunk lid rubber bumpers designed for use with various 1958-72 GM models. These rubber bumpers are engineered to replicate the factory originals in design, fit, and function. Each...
1966-70 Evaporator Case Drain Hose Rubber Seal - with AC
OER® reproduction of original evaporator case drain hose that attaches to the bottom portion of the evaporator core outlet case on various 1966-70 GM models originally equipped with air conditioning. Each drain hose is...
1968 Camaro; Paint Gasket Seal Set; Standard; Except Rally Sport; 15 Piece Set
A complete set of reproduction gaskets designed for use on 1968 Camaro models. Each set designed to replace the gaskets for the outer door handles, tail light lenses, side markers, mirror gasket, antenna base, door lock...
1967 Chevy Camaro; Exterior Paint Seal Gasket Set; Standard Models; 11 Piece Set
A complete set of reproduction gaskets designed for use on 1967 Camaro models. Each gasket is a replication of the original and replaces the outer body gaskets for the door handles, rear tail lights, outer mirror gasket,...
1982-92 Camaro, Firebird; Door Corner Filler Weatherstrip; LH Driver Side
Reproduction of the original weatherstripping for 1982-92 Camaro and Firebird models. This weatherstrip attaches to the plastic corner filler at the front of the side windows on all 1982-92 models. Each weatherstip is molded...
1968-69 Camaro; Rally Sport Firewall Grommet; EPDM Molded Rubber
Reproduction of the original firewall grommet designed for use with 1968-69 Chevrolet Camaro models equipped with the Rally Sport hidden headlight option. Manufactured from high-quality EPDM rubber, this grommet accurately...
1967-68 Chevrolet; Inner Fender Air Conditioning Hose Grommet; Various Models
Reproduction of the original AC hose grommet designed for use on 1967-68 GM models. Located on the RH front fender well, this hose grommet insulates the AC hoses from the condensor to the engine compartment. Manufactured in...
Reproduction of the original outer door handle and door lock gasket set designed to properly seal and protect the exterior door handle and lock areas on various vehicle models. Each gasket is precision die-cut to factory...