OER® reproduction of the original headlamp adjusting spring designed for use on various GM models. This headlamp spring is used to adjust the headlight beam to the proper alignment. Applications: 1973-1974 Buick Apollo...
1967-68 Camaro, 1968 Chevelle, El Camino; Headlight Bezel Nut Set ; Set of 10
Reproduction of the original style barrel nuts designed for use on 1967-68 Camaro models. These unique barrel shaped plastic insert nuts press into the steel frame and provide a secure anchor for the trim screws. These...
1967 Camaro RS; Headlight Bushing and Washer Set; 14 Piece Set
If you are rebuilding a 1967 Rally Sport headlamp assembly, then you'll want to replace the upper and lower headlight bushings. These bushings will help promote a smooth and efficient operation when the headlamps are...
1967 Camaro; Rally Sport Outer Headlamp Door Cover; RH Passenger Side
Correct reproduction of the original headlamp return cover designed for use on 1967 Camaro Rally Sport (with hidden headlamps) models. Manufactured in injection molded ABS to factory specifications. This headlamp cover will...
1968 Camaro; RS Headlamp Bell Crank Spring and Bracket Set ; 8 Piece Set
Keys onto lower end of headlamp bell crank and acts as an over center counter balance assist. This set includes two attachment brackets which install on the lower edge of the headlamp housing and allow correct closure of the...
1967-69 Camaro; Rally Sport Headlamp Hinge Pivot Bolt; Each
Reproduction of the original bolt used to pivot the Rally Sport headlamp doors on 1967-69 Camaro models. This bolt installs through the control opening hinge and attaches the hinge to the headlamp housing on RS (hidden...
1968 Camaro; Rally Sport; Headlight Bellcrank; LH Drivers Side
Reproduction of the original 1968 Camaro Rally Sport bellcrank. The bellcrank installs from the headlamp actuator to the main headlamp housing assembly and enables the headlamp door to open and close when activated. Includes...
1968-69 RS Headlamp Bellcrank Bushings ; 4 piece set
Reproduction of the original headlamp bellcrank bushings designed for use on 1968-69 RS Camaros with the hidden headlamp option. The bushings for on the upper and lower bellcranks. Manufactured with injection molded tooling...
1967-69 Camaro; Rally Sport; Headlight Hinge Bolt Set; Short; Set of 3
Reproduction of the original one-piece, shouldered stud headlight bolts designed for use on 1967-69 Rally Sport Camaros. This set includes 3 hinge bolts which are used to mount the control opening hinge to the control arm...
1967 Camaro; Rally Sport Outer Headlamp Door Cover; LH Driver Side
Correct reproduction of the original headlamp return cover designed for use on 1967 Camaro Rally Sport (with hidden headlamps) models. Manufactured in injection molded ABS to factory specifications. This headlamp cover will...
1967 Camaro; Rally Sport; Headlight Output Arm; Each
OER reproduction of the original headlamp output arm, commonly known as the bellcrank on 1967 Camaro Rally Sport models. Attaches to the return cover door assembly and the headlamp motor. The stamped steel arm, when...
1968 Camaro; Rally Sport; Headlight Bellcrank; RH Passenger Side
Reproduction of the original 1968 Camaro Rally Sport bellcrank. The bellcrank installs from the headlamp actuator to the main headlamp housing assembly and enables the headlamp door to open and close when activated. Includes...
1967-69 Camaro; RS Headlight Hinge to Housing Bushing; Each
Reproduction of the original style bushing that's part of the 1967-69 Camaro RS hidden headlamp hardware. This special bushing is designed to hold the headlight hinge to the headlight housing. 2 required per housing. 4...
1968-69 Camaro; Raly Sport Headlight Vacuum Relay Valve Assembly
Quality reproduction of the original GM headlight relay switch assembly designed for use on 1968-69 Chevrolet Camaro models with Rally Sport (hidden headlight) option. The relay works with the headlight switch on RS models to...
1968-69 Camaro; Rally Sport Headlamp Pin & Clevis Set
Reproduction of the original pin and clevis set designed for use with 1968-69 Camaro RS models with hidden headlamps. The pin and clevis is required to hold the headlight vacuum actuator to the bracket. This is a high quality...
1969 Camaro, Chevelle, Nova; Headlamp Washer Nozzle Set; 4 Piece Set
Exact reproduction of the original type headlamp washer nozzles designed for use on various 1969 GM models. These special windshield washer spray nozzles were standard equipment for all 1969 Rally Sport Camaros, and optional...
1968 Camaro; Rally Sport Headlight Actuator Bracket; Large, Rear; LH Driver Side
Reproduction of the original headlight actuator support bracket designed for use with 1968 Camaro models with the Rally Sport (hidden headlight) option. This bracket supports the rear portion of the headlamp actuator canister...
1967 Camaro; Rally Sport Headlight Nut & Washer Set; 8 Piece Set
OER® reproduction of the original washers and shouldered nuts designed for use with 1967 Camaro Rally Sport models. This nut and washer set is required for the attachment of the output arm to the headlamp motor assembly....
1974-77 Chevrolet Camaro; Headlamp Bezel Installation Hardware; Standard & RS
Reproduction of the original mounting hardware used to install the headlamp bezels for 1974-77 Camaro models. This hardware set is used to mount the headlamp bezel to the headlamp housing. Includes hardware for both RH and LH...
1968-69 Camaro; Rally Sport Headlight Bushing Set; 22 Piece Set
Reproduction of the original bushings needed when rebuilding or adding a Rally Sport grill assembly (concealed headlamps). If your rebuilding a 1968-69 Rally Sport headlamp assembly, then you'll want to replace the upper and...
1969 Camaro Rally Sport; Headlight Hinge; RH or LH; Each
Reproduction of the original Rally Sport headlight hinge designed for use with 1969 Camaro Rally Sport models. Each hinge is manufactured in quality die-cast and unpainted, matching the original in design, appearance, and...
1974-77 Camaro: Z/28 Headlamp Bezel Hardware Set; RH & LH
Reproduction of th eoriginal hardware used to install the headlamp bezel to the headlamp housing for 1974-77 Chevrolet Camaro Z/28 models. Includes both driver and apssenger side hardware. One set required per vehicle.
Reproduction of the original style headlamp switch stem and knob designed for use on various GM models including 1972-75 Camaro models. This pre-assembled pullout headlamp switch includes the rod and knob. Features the...
1976-88 GM; Headlamp Retaining Ring; Rectangular Style; Stainless Steel; 4" x 6" Lamp Design; Each
Reproduction of the original headlamp headlamp retaining ring designed for use with various 1976-1988 GM passenger car and trucks models. Each rectangular retaining ring is manuactured in quality stainless steel replicating...
1969 Camaro; RS Inner Headlamp Door; Die-Cast Chrome; LH Driver Side
Reproduction of the original chrome inner headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each chrome headlight door is manufactured in zinc alloy die-cast metal and chrome plated to a...
1969 Camaro; Rally Sport Outer Headlight Door; Black; Paint to Desired Color; LH Drivers Side
Reproduction of the original outer headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each headlight door is manufactured in quality stamped metal and replicates the original in design...
1969 Camaro; Rally Sport Outer Headlight Door; Black; Paint to Desired Color; RH Passenger Side
Reproduction of the original outer headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each headlight door is manufactured in quality stamped metal and replicates the original in design...
1967-68 Camaro; Rally Sport Headlight Door Hinge; RH or LH; Each
Reproduction of the original RS Camaro headlight hinge that pivots the headlamp concealment door assembly when the headlights are activated. Manufactured in OEM zinc die-cast material. Hinge was installed on both the LH and...
1967 Camaro; Rally Sport Relay Mounting Bracket
Reproduction relay mounting bracket for 1967 Rally Sport models with hidden headlamps. Unique to the Rally Sport model only, this mounting bracket held the three headlamp relays and the power circuit breaker. If your 1967 was...
1968 Camaro RS; Headlamp Bellcrank Shaft & Lever Supports; RH or LH; Pair
Reproduction of the original headlamp bellcrank shaft and lever support designed for use on 1968 Camaro RS models. These supports are used to support the shaft and lever assembly for the headlamps on RS (hidden headlamp)...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head, 10 Piece Set
Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...
1968-69 Camaro RS Headlamp Vacuum Actuator; with Concealed Headlights; Each
Superb quality reproduction of the original headlamp vacuum canister designed for use on all 1968-69 Camaro models that included concealed headlamps. Each actuator is manufactured to exact factory specifications ensuring a...
1969 Camaro; RS Inner Headlamp Door; Die-Cast Chrome; RH Passenger Side
Reproduction of the original chrome inner headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each chrome headlight door is manufactured in zinc alloy die-cast metal and chrome plated to a...
1968-69 Camaro; Rally Sport Firewall Grommet; EPDM Molded Rubber
Reproduction of the original firewall grommet designed for use with 1968-69 Chevrolet Camaro models equipped with the Rally Sport hidden headlight option. Manufactured from high-quality EPDM rubber, this grommet accurately...
1967-68 Camaro; Rally Sport Headlight Backing Plate; RH Passenger Side
Reproduction of the original rear headlamp backing plate designed for use on 1967-68 Camaros with the RS (hidden headlamp) option. This backing plate acts as a support for the outer headlamp door and molding. This backing...
1968-69 RS Headlamp Retracting Cover Shaft Washer - Each
Reproduction of the original retracting cover shft washer unit designed for use with 1968-69 headlamp assemblies. This washer is designed to replace the existing unit for any 1969-69 Camaro RS model when rebuilding the...
1967-69 RS Headlight Hinge to Headlight Backing Plate Spacer ; Each
Reproduction of the original retracting cover mounting plate found on 1967-69 Camaro Rally Sport models. This reproduction spacer is manufactured in injection molded ABS offering an authentic appearance and fit. Used as a...