1967-72 Chevy, GMC Fleetside Pickup, Blazer, Jimmy, Suburban; Rear Bumper; Chrome
This is an OER® Authorized reproduction chrome bumper for 1967-72 Chevrolet and GMC Fleetside pickup trucks, Blazer, Jimmy, and Suburban models. This authentic reproduction bumper is manufactured to original factory...
1971-72 Chevy Pickup, Blazer Suburban; Front Bumper; Chrome; OER
OER reproduction of the original chrome front bumper designed for use on 1971-72 Chevrolet pickup, Blazer, and Suburban models. Each bumper features bright triple chrome plating replicating the original in quality and...
1973-80 Chevy Pickup, Blazer, Jimmy, Suburban; Front Bumper; Chrome; w/o Impact Strip Holes
OER® Authorized reproduction of the original chrome front bumper designed for use with 1973-80 Chevrolet and GMC truck models. This quality reproduction ftont bumper is manufactured to factory specifications featuring a...
OER Authorized sliding rear window to fit 1973-86 Chevrolet/GMC C/K and 1987-91 R/V pickup truck models. Features a three panel design, self-locking latch, and a slim line frame to enhance visibility. Aluminum frames feature...
1967-70 Chevy, GM, Blazer, Jimmy, Suburban; Chrome Front Bumper; Reproduction
OER® Authorized quality reproduction of the original front bumper designed for use with 1967-70 Chevrolet and GMC truck models. Each bumper is designed and manufactured to duplicate the original in virtually every detail....
1967-87 Chevrolet, GMC Stepside Pickup Truck; Chrome Rear Bumper
Reproduction of the original chrome rear bumper designed for use with 1967-87 Chevrolet and GMC Stepside pickup truck models. Each bumper is manufactured to original factory specifications replicating the original in design,...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1962-84 GM; Windshield Washer Jar Cap; Various Models
Reproduction of the original windshield washer jar cap designed for use on a variety of GM models including 1967-1974 Camaro. Manufactured in durable injection-molded ABS, this cap replicates the original design and includes...
1962-1977 GM; Windshield Washer Jar Bracket; Various Models
OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...
This convertible is crafted from Stayfast, a heavy-duty three-ply composite canvass material. It consists of an acrylic square weave facing, rubber inner-layer, and cotton backing. Stayfast is a popular upgrade to vinyl...
This convertible is crafted from Pinpoint vinyl, a heavy-duty vinyl composite material. It consists of an outer layer of PVC and an inner layer of dyed, 100-percent-cotton sateen. This vinyl design is original to most...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1947-69 Chevy, GMC Pickup, Blazer, Suburban; Outer Door Mirror Arm Mounting Screw Set
OER® reproduction 3-piece stainless steel screw set designed for mounting the outer door side mirror arms on 1947-1972 Chevrolet and GMC pickup truck models. Each screw set is manufactured from premium stainless steel for...
1993-2002 Chevrolet Camaro; High Rise Rear Spoiler; Urethane
Superb factory style reproduction of the original rear spoiler designed for use with 1993-2002 Camaro models. Each rear spoiler is manufactured using quality, automotive-grade fiberglass material offering an authentic...
Flush mount front windshield glass for 1973-86 C/K and 1987-91 R/V, Chevrolet or GMC pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate...
Flush mount front windshield glass for 1967-72 Chevrolet or GMC C/K-Series pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate the outer...
Flush mount front windshield glass for 1973-86 C/K and 1987-91 R/V, Chevrolet or GMC pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate...
OER®OER® reproduction of the Trico RF-15 style wiper blade insert/refill for 15" TRICO wiper blades. This period-correct RF-15 style insert features a stainless steel vertebrae and a precision wiping edge manufactured...
1960-63 Chevy, GMC Pickup, Suburban; Windshield Glass; Gray Tinted Without Shade
Reproduction curved front windshield glass for 1960-63 Chevrolet and GMC pickup, and Suburban models as listed. Windshields are manufactured using tempered laminate safety glass designed for protection against road debris....
1960-66 Chevy, GMC Pickup, Panel, Suburban; Door Check Assembly; LH or RH; Each
OER® Authorized reproduction door check for 1960-66 Chevrolet & GMC model trucks. Designed to prevent the door from opening too far, this reproduction is precision manufactured for an exact replacement of the original...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
Reproduction rear step bumper for 1988-00 Chevrolet/GMC C/K GMT400 series fleetside pickup. Each step bumper is equipped with a molded polymer step pad on the top bumper surfaces for a better grip when using the bumper as a...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1960-63 Chevy, GMC Pickup, Suburban; Windshield Glass; Gray Tinted With Dark Gray Shade
Reproduction curved front windshield glass for 1960-63 Chevrolet and GMC pickup, and Suburban models as listed. Windshields are manufactured using tempered laminate safety glass designed for protection against road debris....
1999-07 Chevy Silverado, GMC Sierra; Fleetside; Rear Step Bumper; with Brackets; Chrome
Reproduction rear step bumper for 1999-06 Chevrolet/GMC GMT800 Series fleetside 1500 and 2500 Light Duty Silverado/Sierra models and 2007 Classic Series GMT800 models. Each chrome step bumper is equipped with a molded polymer...
1973-84 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Windshield Wiper Arm; RH or LH; Each
OER® Authorized reproduction bayonet style windshield wiper arm for all 1973-84 Chevrolet & GMC truck models including Suburban, Crew Cab, Blazer, and Jimmy. Each wiper arm is manufactured to OE factory specifications in...
1967-70 Chevy Pickup, Blazer, Suburban; Front Bumper ; Chrome; OER Premier® Show Quality
OER Premier™ reproduction of the original chrome front bumper designed for use on 1967-70 Chevrolet pickup, sedan delivery, Blazer, and Suburban models. This reproduction bumper is designed exclusively for the restorer...
1963-66 Chevy, GMC Fleetside Pickup Truck; Chrome Rear Bumper; with License Hole; OER premier™
OER Premier® reproduction of the original chrome rear bumper for 1963-66 Chevrolet & GMC Fleetside pickup truck models. Each bumper is manufactured to correct factry specifications offering an authentic replacement of the...
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; Chrome; LH Driver Side
Upgrade the look of your 1967-72 Chevrolet or GMC truck with this custom reproduction front inner fender skirt. Designed for Pickup, Blazer, Jimmy, and Suburban models, this panel is precision-stamped to original GM...
1960-66 Chevy, GMC Truck; Windshield Wiper Blade; with Red Dot Push Button; 13" Long; Each
Reproduction "Red Dot" style 13" windshield wiper blades for 1960-66 Chevrolet and GMC truck and a variety of other models. Each blade features polished stainless steel construction and accepts a 3/16" narrow-style bayonet...
1967-72 Chevy, GMC Fleetside Pickup, Blazer, Jimmy, Suburban; Rear Bumper; Chrome
OER Premier™ reproduction chrome rear bumper for 1967-72 Chevrolet and GMC Fleetside pickup trucks, Blazer, Jimmy, and Suburban models. This reproduction rear bumper is designed exclusively for the restorer who demands...
1967-87 Chevy, GMC Stepside Pickup; Rear Bumper; Chrome; OER Premier® Show Quality
OER Premier™ reproduction of the original chrome rear bumper designed for use on 1967-1987 Chevrolet and GMC Pickup truck models. This reproduction bumper is designed exclusively for the restorer who demands the best...
Reproduction rear step bumper for 1999-07 Chevrolet/GMC Silverado/Sierra 1500 and Light Duty 2500 fleetside models. Each step bumper is equipped with a molded polymer step pad on the top bumper surfaces for a better grip when...
1960-66 Chevrolet, GMC Pickup; Stepside; Chrome Rear Bumper; Show Quality
OER Premier® reproduction of the original chrome rear bumper designed for use with 1960-66 Chevrolet and GMC Stepside Pickup truck models. Each bumper is manufactured to OE specifications replicating the original in...
1947-72 Chevy, GMC Pickup Blazer, Jimmy, Suburban; Round Door Mirror Head; Chrome; Smooth Backing
Reproduction exterior round mirror head for 1947-72 Chevrolet & GMC truck models. This reproduction mirror head is design to replace the worn out or missing original. Features a chrome backing with a 5" smooth, non-ribbed...
1963-66 Chevy, GMC Pickup, Blazer Suburban; Front Bumper; Chrome; Reproduction
OER reproduction of the original front bumper designed for use with 1963-66 Chevrolet and GMC Pickup, Panel and Suburban models. Each bumper is manufactured to duplicate the original in virtually every detail. Will fit and...
Reproduction front bumper guards for 1967-72 Chevrolet/GMC pickup, Blazer and Suburban models. Manufactured to OE specifications in stamped steel with brightly poilshed chrome plating for an authentic original equipment...
Reproduction outer door side mirror assembly for 1970-1972 Chevrolet and GMC trucks. Manufactured in die-cast zinc and chrome plated for an authentic look and fit. Includes mounting plate, gasket, and screws. Fits the LH...
Reproduction outer door side mirror assembly for 1970-1972 Chevrolet and GMC trucks. Manufactured in die-cast zinc and chrome plated for an authentic look and fit. Includes mounting plate, gasket, and screws. Mirror head...
1960-63 Chevy, GMC Pickup, Suburban; Windshield Glass; Tinted
Reproduction curved front windshield glass for 1960-63 Chevrolet and GMC pickup, and Suburban models as listed. Windshields are manufactured using tempered laminate safety glass designed for protection against road debris....
1999-07 Chevrolet, GMC GMT800 Stepside Pickup Rear Step Bumper; With Brackets; Black
Reproduction rear step bumper for 1999-07 Chevrolet/GMC GMT800 Series stepside pickup. Each step bumper is equipped with a molded polymer step pad on the top bumper surfaces for a better grip when using the bumper as a step...
1967-72 Chevrolet, GMC Pickup; Back Window Glass; Flush Mount; Glue-In; No Molding Needed; Clear
Flush mount back window glass for 1967-72 Chevrolet or GMC C/K-Series "Big Window" pickup trucks. This custom made back window glass is manufactured slightly larger than the original allowing you to eliminate the outer...
1995-2000 Escalade, Suburban, Tahoe, Yukon; Rear Window Glass; 3-Hole; Heated; Dk Privacy Tint
Reproduction of the original rear window glass designed for use with 1999-2000 Cadillac Escalade, and 1995-99 Suburban, and 1995-2000 Tahoe and Yukon models with rear wiper, and heated rear glass. Fits 1995-96 models from...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
Reproduction of the original encapsulated pop-out rear quarter (third door) window glass for 1988-2000 extended cab Chevrolet and GMC pickup truck models. Replace scratched, broken or missing original 3-hole movable quarter...
Reproduction front and rear cab mount bushing set for 1988-98 Chevrolet and GMC extended cab C/K GMT400 series pickup models. Each bushing is manufactured to correct factory specifications offering an authentic reproduction...
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1988-98 Chevrolet, GMC C/K GMT400 Series Truck, Blazer, Jimmy, Suburban; Front Bumper; Chrome
Reproduction chrome front bumper for 1988-98 Chevrolet and GMC 2 door or extended cab models. Manufactured to exact factory specifications, this reproduction chrome bumper is designed to replace the original in every detail....
1967-72 Chevrolet, GMC Fleetside Pickup; Rear Roll Pan; with License Plate Pocket & 2 License Lamps
Customize the rear end of your Chevrolet or GMC pickup truck with this quality roll pan with license plate pocket. This roll pan is manufactured in quality stamped steel for a precise custom fit. Features an EDP coating for...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Front Windshield Glass; Green Tint; w/o Band
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Front Windshield Glass; Clear
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
Reproduction rear step bumper face bar for 1988-00 Chevrolet/GMC C/K GMT400 series fleetside pickup, 1992-94 Blazer, 1995-00 Tahoe, 1992-99 Suburban, and 1992-00 Yukon SUV models. Each step bumper face bar is manufactured in...
1973-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Spring; Each; Made in the USA!
Correct reproduction of the original hood hinge spring designed for use on 1973-80 Chevrolet and GMC truck models. Each spring is manufactured to OE specifications and features the correct tension ratio, offering the highest...
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; RH Passenger Side
Restore the factory look of your 1967-72 Chevrolet or GMC truck with this premium reproduction inner front fender skirt. Designed for Pickup, Blazer, Jimmy, and 1967 Suburban models, this panel is precisely stamped from...
1960-66 Chevy, GMC Pickup, Panel, Suburban; Hood Hinge Springs; Polished Stainless; RH & LH: pair
Take your restoration to the next level with these custom polished stainless steel hood hinge springs for 1960-66 GM truck models. Precision-engineered to fit and function like the originals, these springs not only deliver...
1998-2002 Camaro; Front Bumper Cover; without "CAMARO" Lettering
Reproduction front bumper cover for 1998-02 Camaro models. Each bumper cover is manufactured in quality urethane materials to factory specifications replicating the original in material and fitment. Unlike the original bumper...