1967-72 Chevy, GMC Fleetside Pickup, Blazer, Jimmy, Suburban; Rear Bumper; Chrome
This is an OER® Authorized reproduction chrome bumper for 1967-72 Chevrolet and GMC Fleetside pickup trucks, Blazer, Jimmy, and Suburban models. This authentic reproduction bumper is manufactured to original factory...
1971-72 Chevy Pickup, Blazer Suburban; Front Bumper; Chrome; OER
OER reproduction of the original chrome front bumper designed for use on 1971-72 Chevrolet pickup, Blazer, and Suburban models. Each bumper features bright triple chrome plating replicating the original in quality and...
1973-80 Chevy Pickup, Blazer, Jimmy, Suburban; Front Bumper; Chrome; w/o Impact Strip Holes
OER® Authorized reproduction of the original chrome front bumper designed for use with 1973-80 Chevrolet and GMC truck models. This quality reproduction ftont bumper is manufactured to factory specifications featuring a...
1967-70 Chevy, GM, Blazer, Jimmy, Suburban; Chrome Front Bumper; Reproduction
OER® Authorized quality reproduction of the original front bumper designed for use with 1967-70 Chevrolet and GMC truck models. Each bumper is designed and manufactured to duplicate the original in virtually every detail....
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1962-1977 GM; Windshield Washer Jar Bracket; Various Models
OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1947-72 Chevrolet/GMC Truck Outer Door Mirror Arm Mounting Screw Set
OER® reproduction 3 piece stainless steel screw set for mounting the outer door side mirror arms on 1947-72 Chevrolet and GMC trucks. One set per mirror arm required. Note: Not for use on 1970-72 door mirror assemblies....
Flush mount front windshield glass for 1973-86 C/K and 1987-91 R/V, Chevrolet or GMC pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate...
Flush mount front windshield glass for 1967-72 Chevrolet or GMC C/K-Series pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate the outer...
Flush mount front windshield glass for 1973-86 C/K and 1987-91 R/V, Chevrolet or GMC pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate...
OER®OER® reproduction of the Trico RF-15 style wiper blade insert/refill for 15" TRICO wiper blades. This period-correct RF-15 style insert features a stainless steel vertebrae and a precision wiping edge manufactured...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1967-70 Chevy Pickup, Blazer, Suburban; Front Bumper ; Chrome; OER Premier® Show Quality
OER Premier™ reproduction of the original chrome front bumper designed for use on 1967-70 Chevrolet pickup, sedan delivery, Blazer, and Suburban models. This reproduction bumper is designed exclusively for the restorer...
1973-84 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Windshield Wiper Arm; RH or LH; Each
OER® Authorized reproduction bayonet style windshield wiper arm for all 1973-84 Chevrolet & GMC truck models including Suburban, Crew Cab, Blazer, and Jimmy. Each wiper arm is manufactured to OE factory specifications in...
1967-87 Chevy, GMC Stepside Pickup; Rear Bumper; Chrome; OER Premier® Show Quality
OER Premier™ reproduction of the original chrome rear bumper designed for use on 1967-1987 Chevrolet and GMC Pickup truck models. This reproduction bumper is designed exclusively for the restorer who demands the best...
Reproduction front bumper guards for 1967-72 Chevrolet/GMC pickup, Blazer and Suburban models. Manufactured to OE specifications in stamped steel with brightly poilshed chrome plating for an authentic original equipment...
Premier reproduction chrome rear bumper for 1981-86 Chevrolet and GMC Fleetside pickup, Blazer, Jimmy, Suburban and 1987-91 R/V pickup, Blazer, Jimmy, Suburban (R/V) models without impact strip holes. Each bumper is...
1970-72 Chevrolet/GMC Truck; Outer Door Mirror Kit; LH
Reproduction outer door side mirror assembly for 1970-72 Chevrolet and GMC truck models. Each mirror is manufactured in quality die-cast zinc and chrome plated offering an authentic appearance and fit. Includes the mounting...
1970-72 Chevrolet/GMC Truck; Outer Door Mirror Kit; RH
OER® Authorized reproduction of the original outer door side mirror assembly for use with 1970-72 Chevrolet and GMC truck models. Each mirror is manufactured in quality die-cast zinc and chrome plated offering an...
1967-72 Chevy, GMC Fleetside Pickup, Blazer, Jimmy, Suburban; Rear Bumper; Chrome
OER Premier™ reproduction chrome rear bumper for 1967-72 Chevrolet and GMC Fleetside pickup trucks, Blazer, Jimmy, and Suburban models. This reproduction rear bumper is designed exclusively for the restorer who demands...
Premier reproduction chrome front bumper for 1983-86 Chevrolet and GMC C/K pickup, Blazer, Jimmy, Suburban, and 1987-91 pickup, Blazer, Jimmy, Suburban R/V models including crew cab, and dually models. This excellent...
Premier reproduction chrome front bumper for 1983-86 Chevrolet and GMC C/K pickup, Blazer, Jimmy, Suburban, and 1987-91 pickup, Blazer, Jimmy, Suburban R/V models including crew cab, and dually models. This excellent...
1981-91 Chevy, GMC Fleetside Pickup, Blazer, Suburban; Chrome Rear Bumper; with Impact Strip Holes
Reproduction of the original style chrome rear bumper for 1981-86 Chevrolet & GMC Fleetside (C/K) pickup, Blazer, Jimmy, Suburban, and 1987-91 Pickup (R/V), Blazer, Jimmy, and Suburban models with impact strip holes. Each...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
1971-72 Chevy Pickup, Blazer, Suburban; Polished Billet Grill Insert; with 8mm Bars
Replacement billet aluminum grill for 1971-72 Chevrolet pickup, Suburban and Blazer models. Replace your factory grill with this custom billet grill for a modernized appearance. Features a polished finish with 8mm grill bars....
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 Chevy Pickup, Blazer, Suburban; Front Bumper Guards; with Hardware; Pair
Reproduction front bumper guards for 1967-72 Chevrolet pickup, Blazer and Suburban models. Manufactured to OE specifications in stamped steel with brightly poilshed chrome plating for an authentic appearance. Includes...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Front Windshield Glass; Green Tint; w/o Band
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Front Windshield Glass; Clear
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1973-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Spring; Each; Made in the USA!
Correct reproduction of the original hood hinge spring designed for use on 1973-80 Chevrolet and GMC truck models. Each spring is manufactured to OE specifications and features the correct tension ratio, offering the highest...
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; RH Passenger Side
Restore the factory look of your 1967-72 Chevrolet or GMC truck with this premium reproduction inner front fender skirt. Designed for Pickup, Blazer, Jimmy, and 1967 Suburban models, this panel is precisely stamped from...
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
Wiper Blade Insert; Replacement; 16" Anco Style; Each
OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...
1967-72 Chevy, GMC Pickup, Blazer, Suburban; Door Latch Assembly; LH Driver Side
Reproduction door latch designed for use with 1967-72 Chevrolet and GMC truck models. Each latch is manufactured to precise factory specifications, accurately replicating the original in design, appearance, and fitment....
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; LH Driver Side
Bring back the authentic factory look of your 1967-72 Chevrolet or GMC truck with this high-quality reproduction inner front fender skirt. Designed to fit Pickup, Blazer, Jimmy, and Suburban models, this panel is...
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1960-72 Chevrolet, GMC Truck; Door Latch Screw Set; 12 Piece Set; 6 Screws, 6 Washers
OER® Authorized reproduction door latch screws and lock washers for 1960-72 Chevrolet and GMC truck models. Screws are 5/16"-18 thread, measure 3/4" in thread length and 1 inch in overall length. Set of 6 screws and 6...
1973-91 Chevrolet, GMC Suburban; Rear Tailgate Glass Window; Tempered; Clear
Reproduction of the original back window glass for 1973-91 Chevrolet and GMC Suburban models with a rear tailgate. Manufactured with the proper shape, curvature, and pattern in OEM equivalent material. Replace your missing,...
1973-91 Chevrolet, GMC Suburban; Rear Tailgate Glass Window; Tempered; Light Green Tint
Reproduction of the original back window glass for 1973-91 Chevrolet and GMC Suburban models with a rear tailgate. Manufactured with the proper shape, curvature, and pattern in OEM equivalent material. Replace your missing,...
1973-80 Fleetside, Suburban, Blazer, Jimmy; Rear Bumper; Black Powdercoat; w/o Impact Strip Holes
Reproduction of the original chrome rear bumper designed for use with 1973-80 Chevrolet and GMC Fleetside pickup trucks, Chevy Blazer, GMC Jimmy, and all Suburban models. Each bumper is manufactured to original factory...
1973-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Assembly; LH Driver Side
Reproduction of the original hood hinge assembly for 1973-80 Chevrolet & GMC pickup, Blazer, Jimmy, and Suburban models. Each hood hinge is manufactured from quality stamped steel assuring a quality replacement. This hood...
1967-72 Chevy, GMC Pickup. Blazer, Jimmy, Suburban; Windshield Wiper Motor Transmission Arm Assembly
Reproduction windshield wiper motor transmission arm assembly for 1967-1972 Chevrolet and GMC truck models. Each assembly is manufactured to original GM specifications, replicating the factory design, quality, and fitment. A...
1975-91 Chevrolet, GMC Suburban; Rear Quarter Window Glass; Tinted; RH Passenger Side
OER reproduction of the original rear quarter glass window for use with all 1975-91 Chevrolet and GMC Suburban models. Replacing your original glass will eliminate any scratches, chips, or cracks the original glass may have...
Replacement style stainless steel capped bumper bolt and nut designed for use on many GM vehicles. Each bolt measures 1/2"-13 x 1-1/2"; 1-1/8" head diameter and comes complete with attaching nut. Can be used for a wide...
Correctly reproduced glass windshield washer bottle that was common in various 1955-72 General Motors vehicles. Each bottle is manufactured in the correct factory configuration that replaces the old or missing original...
1963-69 Buick, Chevrolet, GMC, Oldsmobile, Pontiac; Windshield Wiper Motor; 1 Speed; Brand New
Brand New Reproduction wiper motor built using the industry's most advanced engineering technology. Core shortages and low availability have made our brand new replacement wiper motors the high quality, low cost alternative...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models with a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models with a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
OER® Authorized reproduction front door latch designed for use with all 1973-81 Chevrolet and GMC C/K pickup, Suburban, Blazer, and Jimmy models, as well as early 1982 models equipped with the "first design" door latch...
Restore the OE look of your 1981-91 Chevrolet or GMC truck with this high-quality reproduction front inner fender skirt. Designed for Pickup, Blazer, Jimmy, and Suburban models, this panel is precision-stamped from durable...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models with a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models without a built-in antenna. This windshield is manufactured with tempered laminate safety glass...