1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1973-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Spring; Each; Made in the USA!
Correct reproduction of the original hood hinge spring designed for use on 1973-80 Chevrolet and GMC truck models. Each spring is manufactured to OE specifications and features the correct tension ratio, offering the highest...
1960-66 Chevy, GMC Pickup, Panel, Suburban; Hood Hinge Springs; Polished Stainless; RH & LH: pair
Take your restoration to the next level with these custom polished stainless steel hood hinge springs for 1960-66 GM truck models. Precision-engineered to fit and function like the originals, these springs not only deliver...
1973-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Assembly; LH Driver Side
Reproduction of the original hood hinge assembly for 1973-80 Chevrolet & GMC pickup, Blazer, Jimmy, and Suburban models. Each hood hinge is manufactured from quality stamped steel assuring a quality replacement. This hood...
Newly tooled heavy duty heat treated OER Premier reproduction hood hinge assembly set for 1967-72 Chevrolet and GMC truck models. Each hood hinge set has been re-tooled to be a perfect replication of the factory original that...
1960-66 Chevy, GMC Pickup, Suburban; Hood Hinge Assembly; EDP Coated; RH Passenger Side
Reproduction hood hinge assembly for 1960-66 Chevrolet and GMC pickup truck, panel truck, and Suburban models. Each hood hinge is manufactured in quality stamped steel, replicating the original in design, appearance, and...
1969-70 Chevrolet Truck; Hood Latch Assembly; EDP Coated
Reproduction of the original hood latch for 1969-70 Chevrolet truck models. Each latch is manufactured in quality stamped steel replicating the original in quality and fitment. This latch features the locking mechanism that...
1977-2005 Buick, Chevy, Pontiac, Oldsmobile;;Hood Latch Assembly; Various Models
Reproduction hood latch assembly for various 1977-2005 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed below. Each latch is designed as a direct replacement for the worn or inoperative original....
1967-81 GM; Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; for Hood Hinges; 8 Piece Set; Various Models
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
1962-66 Chevy GMC Pickup, Panel, Suburban; Hood Latch Catch Support Panel; EDP Coated
Reproduction hood latch catch support panel for 1962-66 Chevrolet and GMC truck models. Each hood latch panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
Reproduction hood lock catch support or striker plate for 1967-80 Chevrolet and GMC trucks and SUV models (without inner cable-operated hood release). Each support is produced in stamped steel with the threaded nut welded in...
Replacement black nylon 1-3/4" hood insulation retainer is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models...
1988-99 Chevy, GMC, Pickup C/K, Blazer, Jimmy, Suburban; Hood Hinge Assembly; LH Driver Side
Reproduction hood hinge to replace the broken or missing original hood hinge on your GMT400 series truck or SUV. Manufactured to OE specifications, each hinge is produced in stamped steel and finished in EDP coating for...
1970-2002 GM; Hood Insulation Fastener; Each
Replacement black nylon hood insulation fastener is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models. It...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Assembly; RH Passenger Side
Reproduction hood hinge assembly for 1967-72 Chevrolet and GMC truck models. Each hood hinge is a perfect replication of the factory original that will install, fit, and function correctly. Replace the old or worn out hinge...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Assembly; LH Driver Side
Reproduction hood hinge assembly for 1967-72 Chevrolet and GMC truck models. Each hood hinge is a perfect replication of the factory original that will install, fit, and function correctly. Replace the old or worn out hinge...
Newly tooled heavy duty heat treated OER Premier reproduction hood hinge assembly set for 1967-72 Chevrolet and GMC truck models. Each hood hinge set has been re-tooled to be a perfect replication of the factory original that...
1967-72 Chevy, GMC Pickup, Blazer, Suburban; Hood Hinge Spring; Each; Made in the USA!
Reproduction of the original hood spring designed for use on 1967-72 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models. Each spring is manufactured to exact factory specifications with the correct tension ratio to...
1973-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Assembly; RH Passenger Side
Reproduction of the original hood hinge assembly for 1973-80 Chevrolet & GMC pickup, Blazer, Jimmy, and Suburban models. Each hood hinge is manufactured from quality stamped steel assuring a quality replacement. This hood...
Never have to use a 'prop' rod on your fiberglass hood again. These medium tension springs allow you to retain the original hood functionality without assistance. Designed to fit in the stock position, they restore proper...
1960-66 Chevy, GMC Pickup, Suburban; Hood Hinge Assembly; EDP Coated; LH Driver Side
Reproduction hood hinge assembly for 1960-66 Chevrolet and GMC pickup truck, panel truck, and Suburban models. Each hood hinge is manufactured in quality stamped steel replicating the original in design, appearance, and...
1971-72 Chevrolet Pickup, Blazer, Suburban; Hood Latch Assembly; EDP Coated
Reproduction hood latch for 1971-72 Chevrolet truck models. Each latch is manufactured in quality stamped steel replicating the original in quality and fitment. This latch features the locking mechanism that accepts the hood...
1967-68 Chevy Pickup, Panel, Suburban; Hood Latch Assembly; EDP Coated
Reproduction of the original hood latch for 1967-68 Chevrolet truck models. Each latch is manufactured in quality stamped steel replicating the original in quality, design, and fitment. This latch features the locking...
1973-74 Chevy Trucks, 1973-76 GMC; C/K Trucks; Hood Latch Assembly; EDP Coated
Reproduction hood catch for 1973-74 Chevrolet and 1973-76 GMC C/K-Series trucks. Each catch is manufactured in stamped steel construction to original GM specifications and finished in corrosion-resistant EDP coating. Replaces...
1962-66 Chevy, GMC Pickup, Panel, Suburban; Hood Rear Bump Stop Brackets; Pair
Reproduction rear bump stop brackets for 1962-66 Chevrolet and GMC truck models. Manufactured in quality stamped steel to factory specifications. These reproduction brackets mount to the cowl side of the hood and act as a...
1988-02 Chevy, GMC Pickup, Tahoe, Yukon, Suburban; Hood Latch Support; EDP Coated
Reproduction hood latch support for 1988-2002 Chevrolet and GMC C/K GMT400 series pickup models, 1992-00 GMT400 series Tahoe/Yukon/Escalade/Denali, and 1992-99 GMT400 series Suburban models. This hood latch is manufactured in...
1981-2000 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Latch Pop-Up Spring; Each
This is a correct hood latch pop-up spring designed for use with Chevrolet, Chevrolet Trucks, Cadillac trucks, and GMC trucks. It fits for 153 General Motors vehicles. OEM part number of 14018532. This spring has the...
1988-99 Chevy, GMC, Pickup C/K, Blazer, Jimmy, Suburban; Hood Hinge Assembly; RH Passenger Side
Reproduction hood hinge to replace the broken or missing original hood hinge on your GMT400 series truck or SUV. Manufactured to OE specifications, each hinge is produced in stamped steel and finished in EDP coating for...
Universal Hood Pin Rubber Gasket; Each
Reproduction hood pin rubber gasket found on models with hood pins. Each gasket is die-cut to the proper dimension. This gasket will also fit a wide variety of aftermarket hood pins. Sold individually. Use as required. Check...
1982-92 Camaro, Firebird Hood Pop Up Spring
Reproduction hood pop up spring for all 1982-92 Camaro and Firebird models. Attaches at the hood latch and assists in the hood opening when the latch lever is activated. Manufactured in spring steel to factory original...
1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models
Reproduction hood adjustment bumpers for various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated, or lost originals. Allows for a...
1967-72 Chevy C10, Blazer, Jimmy, Suburban; Hood Bumper Set ; 6 Piece Set
Reproduction of the original style hood bumpers designed for use on 1967-72 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models. Hood bumpers are manufactured in quality EDPM rubber and feature correct dimensions for...
1980-2016 GM; Outer Hood Adjust Rubber Bumper; Each; Various Models
Reproduction of the original molded rubber hood adjustment bumper located on the outer hood for various 1980-2002 GM models. This reproduction molded rubber bumper is manufactured to original specifications for an authentic...
1967-69 Camaro, Firebird; Hood Insulation Fastener Set; 20 Piece Set; Various Models
When it comes to restoring your GM classic, the smallest details often make the biggest difference. These reproduction hood insulation fasteners are the perfect finishing touch for your underhood restoration. Correct in every...
1967-72 Chevy, GMC Pickup, Blazer, Suburban; Hood Side Rubber Stopper Set; 4 Piece
OER® reproduction of the original hood to fender rubber stoppers designed for use on 1967-72 Chevrolet and GMC truck models. These uniquely designed bumpers will replace the originals exactly offering years of service...
Universal Chrome Hood Pin Set; Flip-Over Style; with Landyards
Universal hood pin set for various models. Hood pins are necessary for the attachment of fiberglass or lift off hoods and may be installed for extra security on factory hoods. This universal style hood pin set includes pine,...
1965-81 Buick, Chevy, Pontiac, Oldsmobile; Hood Latch Pilot Bolt; 4"
OER® reproduction of the 4" hood latch pilot bolt for use on various GM models as listed below. The bolt is designed to attach to the lock plate retainer. Once installed, the hood pop-up spring surrounds this bolt....
Chrome Hood Pin Set; Hair Pin Style
Reproduction of the deluxe style hood pin set with hair pin design. Set includes all necessary components to replace the original hood pin including 2 hairpin style hood pins, 2 plates, 4 bolts and 8 mounting screws. Lanyards...
Universal Chrome Deluxe Hood Pin Set; Flip-Over Style; without Lanyards
Reproduction hood pin set with 1/4" "flip over" hood pin design. Set includes all necessary components to replace the original hood pin including 2 "flip over" style hood pins, 2 plates, 4 bolts and 8 mounting screws. Can be...
Hood Pin Kit; with Lanyard; Hair Pin Style; Universal Fit
Hood pins are necessary for the attachment of fiberglass or lift off hoods and may be installed for extra security on factory hoods. Each set uses the two piece hairpin style pins ideal for installations where a...
Reproduction hood hinge and spring assist to replace the worn out, damaged, or missing original spring assembly exactly. Fits 1988-98 Chevrolet or GMC GMT400 series C/K pickup and 1992-99 Blazer/Jimmy, Tahoe/Yukon, and...
Hood Insulation Fastener Set; Nylon; 2" Square Head; 1/4" Stem Dia.; 9/16" Stem Length; 20 Piece Set
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Chrome Hood Hinge Assemblies; Pair
Reproduction of the original hood hinges with springs designed for various 1967-72 Chevrolet and GMC truck models. These unique hood hinges are manufactured in quality stamped steel and chrome plated for a custom appearance....
1973-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Side Rubber Bumper; Each
OER® reproduction of the original hood side bumper designed to keep the hood aligned on 1973-91 Chevrolet and GMC models including Blazer, Jimmy and Suburban. This bumper is manufactured from extruded rubber and fit on...
1998-02 Camaro, Firebird, 2003-13 Impala; Hood Adjust Bumper, Front Center, Each; OER
Correct replacement of the original hood adjuster and bumper designed for use on 1998-2002 Camaro and Firbeird models. This hood adjust bumper will install on the front center bumpers that go on the facia center support. Each...
1973-74 Chevy, 1973-76 GMC C/K Trucks; Hood Latch Catch Support; without Inner Hood Release Cable
Reproduction hood latch catch support bracket for all 1973-74 Chevrolet C/K series pickup, Chevrolet Blazer, and Chevrolet Suburban models. Also fits 1973-76 GMC C/K pickup, GMC Jimmy, and GMC Suburban. This support bracket...
Hood Pin Lanyard; Plastic Coated Cable; Universal Fit
Strong and ready for installation on any vehicle requiring hood pin lanyards. This design can be used for any muscle car or classic truck that requires lanyards for hood pin retention. Plastic coated design is strong and long...
1973-80 Chevy, GMC, Pickup, Blazer, Jimmy, Suburban; Hood Brace Set
Hood brace kit for 1973-80 C/K Chevrolet and GMC truck and SUV models. These braces add structural support to the hood to prevent the common buckling, bowing, and cracking that can occur over time due to stiff hood hinges....
1967-69 Camaro, Firebird; Plastic Clip Set; Radiator Support To Hood Seal; 9 Piece Set
Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...
1998-2002 Chevy Camaro; Hood Lift Support Strut; Gas-Charged; For Steel Hood
Reproduction hood strut for 1998-02 Camaro models with steel hood. Manufactured to factory specifications, featuring correct length and strut pressure. Two required per vehicle. Replaces GM part number # 10293455. {fitment}
1947-75 Chevrolet; Hood Pilot Bolt; 3"; Various Models
Reproduction of the 3" hood latch pilot bolt for various GM models. The bolt is designed to attach to the lock plate retainer. Once installed, the hood pop-up spring surrounds this bolt. Manufactured in case-hardened steel...
Reproduction hood hinge and spring assist to replace the worn out, damaged, or missing original spring assembly exactly. Fits 1988-98 Chevrolet or GMC GMT400 series C/K pickup and 1992-99 Blazer/Jimmy, Tahoe/Yukon, and...
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...
1974-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Latch Pop-Up Spring
This is a correct hood latch pop-up spring designed for use with Chevrolet and GMC truck models. Each spring is manufactured to factory specifications featuring the correct tension ratio. Replaces OEM part number 14016593....