1963-64 Impala, Bel Air, Biscayne; Rubber Stopper Kit; 16 piece set
Reproduction of the original style rubber stoppers designed for use on 1963-64 Chevrolet Impala, Bel Air, and Biscayne models. Achieve a clean tailored appearance of your Chevrolet's body panels by replacing the old or worn...
1961-2002 Buick, Chevy, Pontiac, Oldsmobile; Inner & Outer Door Handle Bumper; Each; Various Models
Reproduction door handle bumper manufactured to factory specifications from correct rubber material to fit and function as original. This rubber bumper is designed to protect the sheet metal of the door where the outer door...
1937-80 GM, 1961-64 Impala, 1964-72 El Camino; Gas Door Bumpers; 1937-58 1-prong Door Bumpers; Pair
Correct reproduction rubber bumper for various GM applications. Fits: 1937-1958 GM full size vehicle door bumper, single prong style, front or rear. 1961-64 full size and 1964-72 El Camino gas filler door. Keeps the door from...
Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each
Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.
1958-59 Impala, Bel Air, Biscayne, El Camino; Rear Gas Filler Door Bumpers; Pair
Correct reproduction of the original gas filler door rubber bumper for use with 1958-59 Impala, Bel Air, Biscayne, and El Camino models. Each bumper is manufactured in EPDM rubber to original factory specifications. Keeps the...
1992-02 Camaro, Firebird, Corvette; Inner Quarter Trim Upper Bumper; Each
Reproduction of the original style rinner quarter trim upper bumper designed for use with 1992-2002 Camaro, Corvett, and Firebird models. Each bumper is manufactured to correct factory specifications replicating the original...
1993-2002 Camaro, Firebird; Rear Lift Window Stopper; Each
Reproduction of the original style rear lift rubber window stopper for use with 1993-2002 Camaro and Fiirebird hatchback models. This stopper is applied to rear compartment window to keep rear window panel from the correct...
1967-69 Camaro, Firebird, 1968-79 Nova; Front Door Bumper; Each
Correct replacement front door rubber bumper for 1967-1969 Camaro, Firebird, 1967-70 Impala, Full Size, 1968-79 Nova, X body 4 door models. Each bumper is replicated to the original OE specifications and fits the door...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; Trunk Lid Rubber Bumper On Lid; Each; Various Models
Correct reproduction of the original trunk lid rubber bumper for use with various 1961-81 Buick, Chevy, Pontiac, and Oldsmobile models. Manufactured in EPDM rubber to factory specifications. Used to eliminate the trunk lid...
1959-79 Buick, Chevy, Pontiac, Oldsmobile; Seat Back Bumper; Oval Style; Each; Various Models
Reproduction of the original oval style seat back bumper designed for use on various 1959-79 GM vehicles. Each bumper is manufactured in hard rubber including a steel core for added strength. The bumper is installed where the...
1961-83 GM; Seat Back Rubber Bumper Stopper; Various Uses & Models; Each
Correct replacement of the rubber bumper for use on various GM models. This rubber stopper will help insure that your seat/hood is aligned properly. Sold individually. Use as required per vehicle. 1-3/16" long, diameter of...
1949-58 Bel Air, 150, 210, Nomad, Impala, Bel Air, Biscayne; Door Bumpers; Pair; Various Models
Reproduction door rubber bumpers for 1949-1958 Chevrolet Bel Air, 150, 210, Impala, Bel Air, Biscayne, and various station wagon models. Designed to help keep your door aligned and in the correct position. Each bumper...
1955-57 Chevy Bel Air, 150, 210, Nomad; Upper Trunk lid, 1955-59 Rear License Plate Bumpers; Pair
Correct reproduction of the rubber bumper for the upper trunk on 1955-57 Chevrolet Bel Air, 150, 210, Nomad cars and the rear license plate on all 1955-59 Impala. Bel Air, Biscayne, El Camino, and station wagon models. Sold...
1982-04 GM; Hood Adjustment Rubber Bumper & Bolt; 1" Diameter; Each; Various Models
Replace your original rubber hood adjuster stoppers with a correctly configured reproduction hood adjustment bumper. This part replace the adjuster bolt and the rubber bumper for a complete bolt-on replacement of the...
1968-81 Camaro, Impala, Firebird; Door Glass Guide Stop Bumpers; Pair; Various GM
Reproduction of the original door glass guide stop bumpers designed for use with various 1968-81 General Motors vehicles. These glass guide stops are required for proper door glass alignment. Commonly damaged during removal...
1959-61 Impala, Bel Air, Biscayne; Hood Side Rubber Bumpers; Pair
Reproduction hood rubber bumpers for 1959-61 full size Chevrolet cars including Impala and Bel Air models. Designed to help keep your hood aligned and in the correct position. Each bumper duplicates the original and fits...
1959 Impala, Bel Air, Biscayne, Station Wagons; Hood To Grill Bumpers; Pair
Original style hood to grill rubber bumper for use on 1959 Chevrolet Impala, Bel Air, Biscayne, El Camino, and station wagon models. Manufactured using quality EPDM rubber, these bumpers are designed to keep the hood from...
1987-04 GM, 1993-97 Camaro, Firebird; Hood Adjuster Bumper Cap; Each
Reproduction of the front hood adjuster bumper cap for 1993-97 Camaro, Firebird, and various other 1987-2004 GM models. Manufactured to correct factory dimensions in quality EPDM rubber for an authentic replacement. Sold...
1993-98 Camaro, Firebird; Fuel Filler Door Rubber Bumper; Each
Reproduction of the fuel tank filler door rubber bumper for all 1993-98 Camaro & Firebird models. This bumper attaches on the fuel filler pocket. Sold individually. 2 required.
1988-00 Chevrolet, GMC C/K GMT400 Pickup, SUV; Tailgate Rubber Bumper
Reproduction tailgate rubber bumper for 1988-1998 Chevrolet and GMC C/K GMT400 Pickup, 1999-2000 C/K 2500/3500 pickup carryover models, 1992-1999 Suburban, 1992-94 Full Size Blazer, and 1992-2000 Tahoe, Yukon, and Escalade...
1960-61 Impala / Full Size Rear License Plate Bumpers - Pair
Correct reproduction rubber bumper for the rear license plate on 1960-61 full size Chevrolet cars including Impala, Bel Air and El Camino models. Sold as a pair.
1941-58 Chevrolet Passenger Car Sedan or Wagon; Door Window Stop
Reproduction lower, rubber window stop bumper for all models except hardtop and convertible. Measures 13/16" Wide 3/16" Tall. Fits most 1941-58 Chevrolet Cars.
1991-96 Buick, Chevrolet; 1993-96 Cadillac; 1991-92 Oldsmobile; Hood Side Bumper; Each
OER reproduction of the original hood side anti-rattle bumper designed for use on 1991-96 GM models. Manufactured from quality molded rubber, each bumper is an exact replica of the original. Sold individually. Buick models...
1967-70 Impala, Full Size Passenger Cars; Door Bumper Set; 4-Piece
Reproduction door bumper set for 1967-70 Chevrolet full size car models including Impala, Caprice, Bel Air and Biscayne models. This is a set of 4 rubber bumpers.
1982-2012 GM Fuel Door; Door Pull Handle; Hood Stop; Sunroof. Rubber Bumper; Each; Various Models
Reproduction of the original style rubber bumper that fits a wide variety of 1982-2012 GM models and applications. Can be used for the fuel door, front and rear door pull handle, hood stop bumper, and sunroof control arm....
1987-2016 GM; Rear Trunk Lid Access Hole Plug; Each; Various Models
Reproduction trunk lid drain hole plug for 1987-2016 GM vehicles including 1991-96 Impala and Caprice models. Manufactured from molded rubber as original, these install on the underside of the trunk lid. Measures 9/165"...
1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models
Reproduction hood adjustment bumpers for various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated, or lost originals. Allows for a...
1961-79 GM; Bucket Seat Back Rubber Stopper Set; Round; w/Mounting Screws; Pair
Reproduction of the original seat back rubber stoppers designed for use on various 1961-79 GM models. These rubber stoppers help prevent rattling and keep the seat back positioned correctly. Replace worn out or missing seat...
1958-77 Buick, Chevy, Olds, Pontiac; Hood Adjust Bumper and Screw Set; Various Models
Reproduction hood adjustment bumpers for various 1958-77 GM models including 1967-69 Camaro and Firebird models. These 7/8" OD reproduction stoppers and screws are manufactured to original specifications to replace the worn...
1955-1976 Glove Box Door Arm Rubber Stopper
Reproduction of the original glove box door arm rubber stopper designed for use on various GM models. Eliminate the rattling and looseness of the glove box door by simply replacing the worn out or missing rubber glove box...
1980-2016 GM; Outer Hood Adjust Rubber Bumper; Each; Various Models
Reproduction of the original molded rubber hood adjustment bumper located on the outer hood for various 1980-2002 GM models. This reproduction molded rubber bumper is manufactured to original specifications for an authentic...
1991-96 Camaro, Impala, Caprice, Firebird; Trunk Lid Rubber Bumper, Each
Reproduction of the original trunk lid rubber stopper designed for use on 1991-96 GM vehicles including Camaro, Firebird, Impala, and Caprice models. Each bumper is manufactured in the correct configuration to fit exactly...
1955-1981 GM; Firewall Pad Fastener; Each
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
1962-70 Buick, Chevy; Pontiac, Oldsmobile; Control Arm Bumper; Rubber; Each; Various Models
Reproduction of the original control arm bumper designed for use on various GM models. Each bumper is manufactured to factory specifications in the correct configuration and includes a built in stud ensuring a perfect fit....
1962-66 Chevrolet; Door Rubber Bumper Set; 4 Piece Set; Various Models
Replacing the rubber door stoppers will help keep your doors aligned correctly while adding a factory fresh appearance to the vehicle. Each rubber bumper is designed and manufactured to exact OE specs. Manufactured in quality...
1962-81 GM; Glove Box Door Arm Rubber Bumper
OER® reproduction of the original glove box door arm rubber bumper designed for use with various 1962-81 GM models. This rubber bumper is manufactured in EPDM rubber to the original factory configuration. Was installed on...
1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each
Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...
1955-58 GM Full Size; Vent Window Bumper Stops; Upper; Pair
Reproductions of the original upper vent window bumpers designed for use on 1955-58 GM Full Size models. Upper vent window bumpers are manufactured to replicate the original design and fit. Includes molded rubber design with...
Reproduction rubber bumper for various GM applications. Each bumper is manufactured in EPDM rubber to factory specifications replicating the original in design and fitment. This bumper was used for various applications...
1988-2000 Chevy, GMC Fleetside Pickup, Blazer, Jimmy, Suburban; Fuel Filler Door Bumper; Each
OER reproduction fuel tank filler door anti-rattle bumper for 1988-00 GM fleetside truck models including Suburban, Blazer and Jimmy. Manufactured from quality molded rubber as original. Sold individually. 2 required.
1966-1979 Camaro, Impala, Nova; Rubber Side Hood Bumper; Each
Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...
1938-91 GM; Consol & Glove Box Rubber Stoppers; Fits 1/4" Hole; Pair
Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...
1962-78 Nova, Camaro, Firebird, Impala, Truck; Speedometer Cable Firewall Grommet; w/Steel Insert
Quality reproduction of the original speedometer cable firewall grommet designed for use on various 1962-73 Chevy II Nova, Camaro, Impala, Bel Air, Biscayne, Caprice, Firebird, and 1973-78 Chevrolet, GMC truck models as...
1970-90 GM; Lower Door Window Stop Bumper; Each; Various Models
Correct reproduction rubber stop bumper designed to keep the door glass from rolling down beyond the required travel point. Each stopper is manufactures from quality EPDM rubber and features a press fit retaining tab for easy...
1968-96 Impala, Chevelle, Corvette; Hood Rear Panel Bumper, Each, Various Models
Reproduction of the original rear hood panel bumper designed for use on various 1968-96 GM models. Exact reproduction of the original rear hood bumper used to replace the worn out or missing original. Manufactured to exact...
Reproduction of the original rubber stopper designed for use on the upper door section of the various GM models listed below. Each rubber stopper is manufactured to replicate the original in fitment and appearance. This...
1958-72 Buick, Chevy, Olds, Pontiac; Trunk Lid Rubber Stopper; Each; Various Models
Correct OER® reproduction of the original trunk lid rubber bumpers designed for use with various 1958-72 GM models. These rubber bumpers are engineered to replicate the factory originals in design, fit, and function. Each...
1970-87 Buick, Chevrolet, Olds, Pontiac; Upper Control Arm Bumper; Various Models; Each
Reproduction control arm bumper for Buick, Chevrolet, Oldsmobile, and Pontiac models. This upper control arm bumper is designed to replicate the factory original and is essential for proper suspension travel and ride control....