1961-68 GM Car; Various Models; Fuel Tank to Filler Neck Hose; 1-7/8 ID x 3 Long
Reproduction fuel tank to filler hose that seals the inlet filler neck to the tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with correct high...
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
1991-96 Chevrolet Caprice/Impala; Fuel Tank Kit; With Neck, Hoses, Clamps, and Hardware
OER Replacement silver powder-coated steel fuel tank for 1991-96 Caprice/Impala and other GM models. The original plastic fuel tank is the weak link in the fuel system of the full size GM passenger car. Prone to cracking and...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Replacement fuel tank for 1969-70 full-size passenger car models (except wagon). This fuel tank is made of stainless steel and has a capacity of 24 gallons (91 liters), measures 35" 37" x 4" and includes the fuel sender lock...
Reproduction of the original fuel tank designed for use with 1969-1970 Chevrolet Impala, Bel Air, Biscayne, and Caprice models (except station wagon). This reproduction fuel tank is manufactured in quality stamped steel...
Correct reproduction of the original fuel tank designed for with 1965-1966 Chevrolet Impala, Bel Air, Biscayne, and Caprice models (except station wagon). This reproduction fuel tank is manufactured in stainless steel...
1968 Chevrolet Full-Size (Except Wagon); Fuel Tank W/Neck; 24 Gallon; Niterne Coated Steel
Replacement fuel tank for 1968 full-size passenger car models (except wagon). This fuel tank is made of niterne-coated steel and has a capacity of 24 gallons (91 liters), measures 35" 37" x 4" and includes the fuel sender...
1984-96 Chevrolet Corvette; Fuel Tank; Zinc Coated; 20 Gallon Capacity
Reproduction fuel tank for 1984-1996 Chevrolet Corvette models. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion resistance. Includes a 20...
1959-60 Impala, Bel Air, Biscayne; NiTerne Coated Fuel Tank; with Neck; 16 Gallon
Reproduction of the original fuel tank designed for use with 1959-60 Chevrolet Impala, Bel Air, and Biscayne models (except El Camino, station wagon). This reproduction fuel tank is manufactured in quality stamped steel...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1959-60 Impala, Bel Air, Biscayne; Zinc Coated Fuel Tank; with Neck; 16 Gallon
Reproduction of the original fuel tank designed for use with 1959-60 Chevrolet Impala, Bel Air, and Biscayne models (except El Camino, sedan delivery, or station wagon). This reproduction fuel tank is manufactured in quality...
1993-97 Camaro, Firebird; Fuel Tank; with Fuel Neck; Zinc Coated; 15 Gallon Tank
Reproduction of the original style fuel tank designed for use with 1993-97 Camaro and Firebird models. Each fuel tank is manufactured in quality stamped steel to factory specifications featuring a zinc coating offering long...
Reproduction fuel tank for 1965-66 Chevrolet Impala, Bel Air, and Biscayne models (except station wagon). This reproduction fuel tank is manufactured in quality stamped steel featuring a Zinc coating for rust and corrosion...
1961-64 Impala, Bel Air, Biscayne; Fuel Tank Mounting Brace; Each
Reproduction gas tank mounting brace for 1961-64 Impala, Bel Air, and Biscayne models. This brace attaches to the bottom of the trunk floor to support the gas tank. The gas tank mounting strap attaches to this brace....
1957-69 Buick, 1968-70 Chevrolet; Vented Gas Cap; with Markings
Reproduction GM gas cap that includes the correct "S" rivet and properly engraved markings. Manufactured and designed from the original OEM cap, the quality and materials are manufactured to exact specification with the "show...
The most accurate reproduction fuel tank sending unit in the industry, with original design for an authentic fit and genuine appearance. Each sending unit includes the sender, gasket, filter, and float as original. This unit...
1967-70 Impala, Bel Air, Biscayne, Caprice; Fuel Sending Unit; 3/8"; 0-90 ohm
Reproduction fuel sender for 1967-70 Impala, Bel Air, Biscayne, and Caprice models except station wagon models. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with...
1994-99 Chevrolet, GMC, Suburban; Fuel Tank; Zinc Coated; Diesel Fuel; 42 Gallon
Correct reproduction of the original fuel tank designed for with 1994-99 Chevrolet and GMC Suburban C/K 1500, and 2500 Diesel fuel models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc...
Correct reproduction of the original fuel tank designed for 1998-2002 Chevrolet C2500, C3500, GMC C2500 and C3500 models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the...
1990-02 Chevrolet C2500, K2500; GMC C2500, K2500; Diesel Fuel Tank; without Filler Neck; 22 Gallons
Correct reproduction of the original fuel tank designed for 1990-2002 Chevrolet C2500, K2500, GMC C2500 and K2500 models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1990-97 Chevy, GMC Pickup; Zinc Coated Fuel Tank; Gas Powered; 2-Door Extended Cab; 31 Gallon Tank
Correct reproduction fuel tank for 1990-97 Chevrolet and GMC pickup truck models with 2 door extended cab. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for rust and corrosion...
Correct reproduction of the original fuel tank designed for with 1992-97 Chevrolet and GMC 3500 pickup truck models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for rust and...
1990-97 Chevrolet, GMC Pickup 1500, 2500 Fuel Tank; 2-Door Extended Cab; Diesel Fuel; Zinc Coated
Correct reproduction of the original fuel tank designed for with 1990-91 Chevrolet and GMC C/K 1500/ 2500 Diesel fuel pickup trucks, and 1992-97 1500/2500 models with Diesel (except 3500). This reproduction fuel tank is...
1996 Chevrolet S10, Blazer, GMC S15; Fuel Tank; without Filler Neck; 18 Gallons
Correct reproduction of the original fuel tank designed for 1996 Chevrolet S10, Blazer and GMC S15 models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the elements while...
1995 Chevrolet S10, Blazer, GMC S15; Fuel Tank; without Filler Neck; 18 Gallons
Correct reproduction of the original fuel tank designed for 1995 Chevrolet S10, Blazer and GMC S15 models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the elements while...
1988-97 Chevrolet, GMC Pickup; Fuel Tank Neck and Evaperator Hose Set; with Clamps
Reproduction of the original fuel tank filler neck, hoses, and hardware kit designed for use with 1988-97 gas Chevrolet and GMC C/K series pickup truck models. Filler necks are manufactured using heavy duty steel replicating...
Reproduction fuel tank sending unit for 1961-64 Chevrolet Impala. Bel Air, and Biscayne models except station wagon. Each fuel sending unit is manufactured in quality steel to resist corrosion within your fuel tank. Provides...
1961-64 Impala, Bel Air, Biscayne; Fuel Tank Sending Unit; 5/16"; Except Station Wagon
Reproduction fuel tank sending unit produced with original design for an authentic fit and genuine appearance. Each sending unit includes the sender, gasket, filter, and a brass float as original. This unit monitors the fuel...
Reproduction fuel tank sending unit for 1965-66 Chevrolet Impala, Bel Air, Biscayne, Caprice models and 1965-67 Chevelle, El Camino, Malibu and other GM A-Body and B-Body models with 5/16" line. The most accurate reproduction...
1997-02 Chevrolet S10, GMC S15, Jimmy; Fuel Tank; without Filler Neck; 19 Gallon
Correct reproduction of the original fuel tank designed for 1997-2002 Chevrolet S10, S10 Blazer and GMC S15 Jimmy models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the...
1964 Impala, Bel Air, Biscayne; Fuel Tank Filler Neck; Gray Primer; Except Station Wagon Models
Reproduction of the original fuel tank filler neck designed for use with 1964 Impala, Bel Air, and Biscayne models (except station wagons). Each neck is manufactured to factory dimensions and replaces the original exactly....
1968-69 Camaro Z28 Carb to Accelerator Lever Rod; 302 4 bbl
Reproduction accelerator pedal rod for 1968-69 Camaro Z/28 302 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is manufactured to correct...
Reproduction of the original gas tank straps designed for use with 1967-1970 Chevrolet Impala, Bel Air, Biscayne, Caprice models (except station wagon). Each strap is manufactured in quality stainless steel with all correct...
Reproduction of the original fuel tank mounting straps designed for use with 1961-1964 Impala, Bel Air, and Biscayne models (except station wagon). Each strap is manufactured in quality stamped steel and galvanized for long...
Reproduction of the original style fuel tank mounting straps that fit various 1964-1966 Buick, Chevrolet, Pontiac, and Oldsmobile mid-size, and full size models as listed (except station wagon). Each strap is manufactured in...
1964 Impala, Bel Air, Biscayne; Fuel Tank Filler Grommet; Each
Reproduction of the original fuel tank filler grommet designed for use with 1964 Impala, Bel Air, Biscayne, 1964-67 El Camino, Chevelle, and Malibu station wagon models. Grommets are manufactured to correct dimensions...
Reproduction fuel tank support hanger, bracket and strap for 1988-98 Chevrolet and GMC C/K-Series GMT400 truck models. Each support hanger is manufactured in quality stamped steel to original factory specifications for an...
Reproduction of the original gas tank straps designed for use with 1959-1960 Chevrolet Bel Air, Impala, and Biscayne models. Each strap is manufactured in quality stainless steel with all correct contours for an authentic...
Reproduction of the original style fuel tank mounting straps that fit various 1964-1966 Buick, Chevrolet, Pontiac, and Oldsmobile mid-size, and full size models as listed (except station wagon). Each strap is manufactured in...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
Reproduction of the original gas tank straps designed for use with 1958 Chevrolet Bel Air, Impala, and Biscayne models. Each strap is manufactured in quality stainless steel with all correct contours for an authentic fitment...
1968-72 Camaro, Impala, Nova; Holley Throttle Cable Bracket
Reproduction of the original style Holley throttle cable bracket designed for use with various 1968-72 Chevrolet models. Each cable bracket is manufactured in stamped steel to original factory specifications making this...
1993-97 Camaro, Firebird; Fuel Tank Filler Neck
Reproduction of the original fuel tank filler neck for use with 1993-97 Camaro and Firebird models. Manufactured to factory specifications featuring the correct gas cap opening for proper fit, and functionality. Each filler...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Reproduction of the original fuel tank mounting straps designed for use with 1958 Impala, Bel Air, and Biscayne models with a 16 gallon fuel tank (except station wagon). Each strap is manufactured in quality stamped steel,...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Reduce heat coming off of the intake with this reproduction carburetor base gasket with heat shield, installs between the carburetor and intake manifold. This gasket and shield was original equipment for most 1970 Chevrolet...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1965-66 Impala, Bel Air, Biscayne, Caprice; Gas Tank Mounting Straps; Pair
Reproduction gas tank mounting straps for 1965-66 Chevrolet Impala, Bel Air, Biscayne, and Caprice models except station wagon models. Each strap is manufactured in quality stamped steel replicating the original configuration...
1988-2000 Chevy, GMC Truck; Fuel Tank Mount Straps; 6" Bed, 25 Gal Tank; Coated Steel; Pair
Reproduction of the original style fuel tank mounting straps designed for use with 1988-2000 Chevrolet and GMC pickup truck models. Each strap is manufactured in quality to original factory dimensions replicating the original...
Reproduction of the original fuel tank mounting straps designed for use with 1988-2000 Chevrolet, GMC pickup truck models with 8 foot bed, 34 gallon tank. Each strap is manufactured in quality stamped steel, galvanized and...
Reproduction of the original fuel tank mounting straps designed for use with 1988-2000 Chevrolet, GMC pickup truck models with 8 foot bed, 34 gallon tank. Each strap is manufactured in quality stainless steel for long-lasting...
Reproduction of the original OE rubber bumper for use with 1979-86 Chevrolet and GMC C/K pickup truck models, and 1987-91 Chevrolet and GMC R/V models. Also fits other areas of the vehicle including the heat exhaust shield,...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...