1988-98 Chevy Fleetside Pickup; Rear Tailgate Band Molding; with Chevrolet Lettering; GM Licensed
Reproduction tailgate trim panel, also known as the tailgate band, designed for 1988-1998 Chevrolet C/K (GMT400 Series) Fleetside pickup truck models. Each molding is precision-stamped in aluminum and features the correct...
1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1970-75 GM; Windshield Molding Clip; Each
Reproduction of the front and rear window molding clip for various 1970-74 GM models. Manufactured to factory specifications for proper fitment and function. Popular models and applications are listed below, but may fit...
1962 Impala, Biscayne, Bel Air; Hood Lip Molding; with "CHEVROLET" lettering; GM Licensed
Reproduction hood lip molding for 1962 Impala, Bel Air, and Biscayne passenger car models. Each molding is stamped from high-grade aluminum and replicates the original design. Features the word "Chevrolet" with black outlined...
1967-85 GM, 1967-81 Camaro, Firebird; Molding Clip Set; Front or Rear Window; Steel; Set of 24
Replacement windshield and rear window molding steel clips to fit a wide variety of applications on various GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary...
1966 Impala, Caprice; Hood Spear Molding; with Hardware
OER® reproduction of the original hood spear molding designed for use on 1966 Impala and Caprice models. Each molding is reproduced to exact specifications and manufactured in a polished zinc die-cast material for an...
1964 Impala, Bel Air, Biscayne; Outer Grill Eyebrow Moldings; RH & LH; Pair
Reproduction of the original front fender lower eyebrow (outer grill) moldings designed for use on 1964 Chevrolet Impala, Bel Air, and Biscayne models. Each molding is a replication of the original GM eyebrow molding found on...
1965 Impala, Bel Air, Biscayne; Hood Spear Molding
OER® reproduction of the original hood spear molding designed for use on 1965 Impala and Ful Size Chevrolet models. Each molding is produced to match the original in quality, fit and appearance. Each molding is precision...
1965-72 GM; Molding Clip Set; Windshield, Quarter, Back Window; 12-piece Set
Replacement style windshield molding installation clips for various GM models including, 1966-67 Chevy II and Nova and 1965-69 Impala and Full Size models. Each clip is designed and manufactured to replicate the OE style...
1966 Impala, Bel Air, Caprice; Wheel Openining Molding Kit; Front & Rear; with Hardware; Set of 4
Reproduction of the original wheel opening moldings designed for use on 1966 Impala Bel Air, and Caprice models. Each molding is stamped to original factory specifications with correct contours and finish for an original...
1964-71 GM; Molding Clip Set; Windshield, Quarter, Back Window; OE Design; Each
Reproduction of the D-shaped windshield and rear window steel molding clip for various 1965-68 Chevrolet models. Manufactured to original OE factory specifications for proper fitment and function. Screw-on type. Use as...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1968-77 GM; Molding Clip; Windshield and Back Window Reveal Molding; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1988-99 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Body Side Molding; Black & Chrome; 25" Roll
Original style body side molding designed for use on 1988-99 Chevrolet and GMC pickup truck, Suburban, Blazer, and Jimmy models. Manufactured like originals but not pre-cut, this molding set features the correct chrome finish...
1964 Impala, Bel Air, Caprice; Rear Cove Quarter Panel Extension Molding; LH Driver Side
Reproduction of the original rear cove quarter panel extension molding designed for use on 1964 Impala and Full Size Chevrolet models with standard trim level. Molding is stamped correctly in quality aluminum material for an...
Reproduction of the original rear cove quarter panel extension molding designed for use on 1964 Impala and Full Size Chevrolet models with standard trim level. Molding is stamped correctly in quality aluminum material for an...
1962 Impala; Tail Panel Cove Moldings; with Hardware; Pair
Correct reproduction of the original tail lamp cove moldings for 1962 Impala and Full size Chevrolet models. These polished aluminum moldings attach to the quarter panel and act as an extension of the trunk lid molding....
1962 Chevrolet Impala; Rocker Panel Molding; with Mounting Clips; RH Passenger Side
Reproduction rocker panel molding for all 1962 Impala models. Each molding is stamped in quality aluminum to exact factory specifications with correct contours and finish Will replace the old or worn out molding while...
1962 Chevrolet Impala; Rocker Panel Molding; with Mounting Clips; LH Driver Side
Reproduction rocker panel molding for all 1962 Impala models. Each molding is stamped in quality aluminum to exact factory specifications with correct contours and finish Will replace the old or worn out molding while...
1963 Impala, Bel Air, Biscayne; Upper Eyebrow Molding; RH Passenger Side
Reproduction of the original front upper eyebrow extension molding designed for use on 1963 Impala and Full Size Chevrolet models. Manufactured in quality stamped aluminum replicating the original molding in fit and...
1970-75 Camaro, Firebird, Impala, Caprice; Molding Clip Set; Windshield or Rear Window; 24-Pieces
Correctly configured windshield or rear window molding clips designed to install 1970-1974 windshield or back glass window molding sets on a variety of popular GM models. This 24-piece set of reproduction window molding clips...
Reproduction front windshield and back window molding retainer clip set designed for use with a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is...
1968-on GM; Molding Clip; Windshield, Quarter Window, Rear Window; Skylight; 14 Piece Set
Replacement style rear window glass molding installation clips for 1968-72 Chevy II and Nova models as well as a wide variety of additional GM models. Each clip is designed and manufactured to replicate the OE style clips...
1967-72 GM; Molding Clip; Windshield or Back Window; Upper; Lower; Each
Reproduction of the D-Shaped front windshield or back window molding clip for various 1967-72 GM models. Manufactured to factory specifications for proper fitment and function. Use as required. Sold individually. Replaces OE...
Original style capped stud and clip nut designed to protect the owner from accidently cutting hands when reaching into areas like the trunk where the rear panel and quarter molding clips could cause harm. Most commonly used...
1988-2000 Chevy, GMC GMT400, C/K Pickup, Suburban; Rear Wheel Opening Molding; Black; LH Driver Side
OER® Authorized reproduction of the original rear panel wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck and SUV models. Each molding is stamped to original factory specifications featuring...
OER® Authorized reproduction of the original front wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck and SUV models. Each molding is stamped to original factory specifications featuring correct...
1962-76 Chevrolet, Buick, Oldsmobile; Rocker Molding Clip Set; with Screws; 24 Piece Set
This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water build up between the rail and...
1967-72 GM; Molding Clip; Windshield or Back Window; Upper, Lower; 24 Piece Set
Reproduction of the D-Shaped front windshield molding clip for various 1967-on GM models. Manufactured to factory specifications for proper fitment and function. Use as required. Replaces OE #'s 7698976, 8736591. Sold as a...
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1965-72 GM; Windshield, Back Window Molding Clip; Each
Reproduction of the original style rectangular-shaped front and rear window molding clip designed for use with various 1965-72 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured to factory specifications for...
1964 Chevrolet Bel Air, Biscayne, Impala; Front Hood Lip Molding; with Emblem & Hardware
Reproduction front hood lip molding & emblem for 1964 Chevrolet Impala, Bel Air, and Biscayne passenger car models. Each molding is stamped from high grade aluminum duplicating the original GM molding in every detail for an...
1963 Impala, Biscayne, Bel Air; Hood Lip Molding; with Chevrolet lettering; GM Licensed
OER® reproduction hood lip molding for 1963 Chevrolet Impala, Bel Air, and Biscayne passenger car models. Each molding is manufactured in stamped aluminum to factory specifications, ensuring proper fitment and an...
1965 Impala, Bel Air, Biscayne; Wheel Opening Molding Set; 4 Piece Set
Reproduction of the original wheel opening moldings designed for use on 1965 Impala, Bel Ar, and Biscayne models. Each molding is stamped to original factory specifications using quality aluminum with correct contours and...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1964 Impala, Bel Air, Biscayne; Center Rear Cove Molding; Standard Models
Reproduction of the original rear cove center panel molding designed for use on 1964 Impala and Full Size Chevrolet models with factory standard trim level. Each molding is stamped from quality aluminum material in the...
1970 Impala, Bel Air, Caprice; Wheel Opening Molding Kit; Front & Rear; with Hardware; Set of 4
Reproduction of the original wheel opening moldings designed for use on 1970 Impala and Full Size Chevrolet models. Each molding is stamped to original factory specifications with correct contours and finish for an original...
1964 Impala, Bel Air, Biscayne;Center Hood Split Molding; Spear
Reproduction of the original Impala, Bel Air and Biscayne center hood split molding for 1964 models. This hood split molding runs down the center of the hood and sections off the RH from the LH sides of the hood. Each molding...
1965 Bel Air, Biscayne, 1966 Impala; Rocker Panel Moldings; LH & RH; Pair
Reproduction rocker panel moldings for 1965 Bel Air, Biscayne, and 1966 Impala, and Impala SS models. Each rocker panel molding is manufactured in quality stamped aluminum offering an authentic appearance and fit. This...
1964 Impala SS, Bel Air, Biscayne; Upper Trunk Lid Molding; Except Station Wagon
Reproduction of the original upper trunk molding designed for use with 1964 Impala SS, Bel Air, and Biscayne models. Each molding is manufactured in bright finished stamped aluminum replicating the original contour and...
Reproduction of the original outer tail cove moldings designed for use with 1964 Impala SS, Bel Air and Biscayne models. Each molding is manufactured in bright finished stamped aluminum replicating the original contour and...
1988-2000 Chevy, GMC GMT400 Pickup, Suburban; C/K; Rear Wheel Opening Molding;LH Driver Side
Reproduction rear wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck and SUV models. Each molding is stamped to factory specifications featuring correct contours and a bright chrome finish for an...
1965-72 GM; Windshield, Quarter, Back Glass Molding Clip Set; 25 Piece Set
Oldsmobile Windshield Molding Clips: 1965-1968 442 (except convertible) 1965-1968 Ninety-Eight (except convertible) 1965-1968 Cutlass (except convertible) 1965-1968 Delta 88 (except convertible) 1967-1968 Delmont 88 (except...
1964-76 GM; Molding Clip Set; Windshield/Rear Window; 10 pcs With Screws
Reproduction molding retainer clip set for a wide variety of 1964-72 GM models. Designed for emergency use, when a screw-on clip is required. Each clip is produced in spring steel to OE specifications and comes with phillips...
1964-71 Chevrolet; Rear Glass Molding Clip Set; Square Style; 24 Piece Set
OER®replacement rear window glass molding clips for various GM models as listed. Each clip set includes 24 molding clips. Number of clips required may vary depending on the model. For individual clips (1), refer to part...
1964-71 GM; Molding Clip Set; Windshield, Quarter, Back Window; OE Design; 24 Piece Set
OER®reproduction of the OE style, rounded edge design, rear window glass molding clips for various GM models as listed. Each clip set includes 24 molding clips. Number of clips required may vary depending on the model....
1968-77 GM; Molding Clip; Windshield and Back Window Reveal Molding; Stamped Steel; 24 pcs
Reproduction windshield and rear window molding steel clip set to fit a wide variety of GM makes and models. Each set will provide a snug fit for the molding being attached. The amount of clips will vary depending on the...
1968-on GM; Molding Clip; Windshield, Quarter Window, Rear Window; Skylight; Each
Reproduction of the window molding clip for various 1968-72 GM models. Manufactured to factory specifications for proper fitment and function. Use as required. Sold individually. Replaces OE #'s 7730788, 8736585. Dimensions:...
Reproduction front windshield and back window molding retainer clip set for a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is required. Each clip...
1966-76 GM; Molding Clip; Windshield and Rear Window; With Screw
Reproduction molding retainer clip for a wide variety of 1964-72 GM models. Designed for emergency use, when a screw-on clip is required. Produced in spring steel to OE specifications. Sold individually. Replaces OE #...
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
Screw Set, Phillips Ovl # 8 X 3/4" Screw, 12 Pcs
Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 12 chrome phillips oval head #8 x 3/4" screws. Set includes 12 phillips oval head screws. Use as...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually.
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1969-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1964-1968 Chevrolet; Rear Glass Molding Clip; Each
OER®replacement rear window glass molding clip for various GM models as listed. Each clip is sold individually. Number of clips required may vary depending on the model. This steel clip measures 3/4" x 11/16". Sold...