1988-98 Chevy Fleetside Pickup; Rear Tailgate Band Molding; with Chevrolet Lettering; GM Licensed
Reproduction tailgate trim panel, also known as the tailgate band, designed for 1988-1998 Chevrolet C/K (GMT400 Series) Fleetside pickup truck models. Each molding is precision-stamped in aluminum and features the correct...
1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1970-75 GM; Windshield Molding Clip; Each
Reproduction of the front and rear window molding clip for various 1970-74 GM models. Manufactured to factory specifications for proper fitment and function. Popular models and applications are listed below, but may fit...
1968 Impala, Bel Air, Biscayne, Caprice; Front Upper Grill
Reproduction of the original front upper grill for use on all 1968 Chevrolet Impala, Bel Air, Biscayne, and Caprice models except Impala SS-427. This grill is manufactured in quality, automotive-grade stamped aluminum to...
1967 Impala, Bel Air, Biscayne, Caprice; Front Grill Kit; Models without Corner Lamps
Reproduction front grill, headlight bezels, and trim for 1967 Chevrolet Impala and full size models (Except Impala SS). These authentic reproduction components are manufactured in quality stamped aluminum material to exact...
1967 Impala, Bel Air, Biscayne, Caprice; Front Grill Kit; models with Optional Corner Lamps
Reproduction of the original front grill, headlight bezels, and grill filler moldings designed for use with 1967 Chevrolet Impala (non SS), Bel Air, Biscayne and Caprice models. These authentic reproduction components are...
1968 Impala, Bel Air, Biscayne, Caprice; Front Lower Grill
Reproduction of the original front lower grill for use on all 1968 Chevrolet Impala, Bel Air, Biscayne, and Caprice models except Impala SS-427. This grill is manufactured in quality, automotive-grade stamped aluminum to...
1965 Impala, Bel Air, Biscayne; Front Grill Assembly
Note: Shipped double oversize.
1958 Impala, Bel Air, Biscayne, Del Ray, Brookwood; Front Grill Assembly; Stamped Aluminum; OER
Reproduction of the original stamped aluminum center grill assembly designed for use on all 1958 Chevrolet Impala, Bel Air, Biscayne, Yeoman, Brookwood, and Del Ray models. This authentically reproduced front grill is...
1961 Impala, Bel Air, Biscayne; Lower Front Grill Assembly; GM Licensed
Quality reproduction of the original lower front grill unit designed for use on 1961 Chevrolet Impala , Bel-Air and Biscayne models. Each grill is manufactured from OE grade stamped aluminum replicating the original in every...
1966 Impala, Bel Air, Biscayne; Upper Front Grill Assembly; Stamped Aluminum; OER
Reproduction stamped aluminum upper grill assembly for 1966 Chevrolet Impala, Bel Air, Biscayne and Caprice models. Each grill is reproduced to exact factory specifications using high grade quality aluminum that offers an...
1963 Chevy Impala, Bel Air, Biscayne; Front Grill; Stamped Aluminum
Reproduction of the original front grill designed for use with all 1963 Impala, Biscayne and Bel Air models. This superb reproduction is manufactured in quality stamped aluminum to exact factory specifications replicating the...
1960 Impala, Bel Air, Biscayne, El Camino; Front Grill Assembly
Reproduction of the original front grill assembly designed for use with 1960 Chevrolet Impala, Biscayne, Bel Air, El Camino, and full size models including station wagons. This reproduction grill is manufactured in quality...
1967 Impala, Bel Air, Biscayne, Caprice; Front Grill; OER
OER reproduction front grill unit for 1967 Chevrolet Impala (standard), Bel Air, Biscayne and Caprice models. This authentic reproduction is manufactured in quality stamped aluminum to exact factory dimensions replicating the...
1964 Chevrolet Impala, Bel Air, Biscayne; Front Grill; GM Licensed; OER
Reproduction of the original front grill designed for use on 1964 Impala, Bel Air and Biscayne models. This reproduction front grill is manufactured in quality stamped aluminum offering an original appearance and fit. Grills...
1962 Chevrolet Impala, Bel Air, Biscayne; Front Grill
Reproduction front grill assembly for 1962 Chevrolet Impala, Bel Air and Biscayne models. Each grill is manufactured in quality stamped aluminum replicating the original in quality and fitment. Will replace the old or damaged...
1962 Impala, Biscayne, Bel Air; Hood Lip Molding; with "CHEVROLET" lettering; GM Licensed
Reproduction hood lip molding for 1962 Impala, Bel Air, and Biscayne passenger car models. Each molding is stamped from high-grade aluminum and replicates the original design. Features the word "Chevrolet" with black outlined...
1967-85 GM, 1967-81 Camaro, Firebird; Molding Clip Set; Front or Rear Window; Steel; Set of 24
Replacement windshield and rear window molding steel clips to fit a wide variety of applications on various GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary...
1966 Impala, Caprice; Hood Spear Molding; with Hardware
OER® reproduction of the original hood spear molding designed for use on 1966 Impala and Caprice models. Each molding is reproduced to exact specifications and manufactured in a polished zinc die-cast material for an...
1964 Impala, Bel Air, Biscayne; Outer Grill Eyebrow Moldings; RH & LH; Pair
Reproduction of the original front fender lower eyebrow (outer grill) moldings designed for use on 1964 Chevrolet Impala, Bel Air, and Biscayne models. Each molding is a replication of the original GM eyebrow molding found on...
1965 Impala, Bel Air, Biscayne; Hood Spear Molding
OER® reproduction of the original hood spear molding designed for use on 1965 Impala and Ful Size Chevrolet models. Each molding is produced to match the original in quality, fit and appearance. Each molding is precision...
1965-72 GM; Molding Clip Set; Windshield, Quarter, Back Window; 12-piece Set
Replacement style windshield molding installation clips for various GM models including, 1966-67 Chevy II and Nova and 1965-69 Impala and Full Size models. Each clip is designed and manufactured to replicate the OE style...
1966 Impala, Bel Air, Caprice; Wheel Openining Molding Kit; Front & Rear; with Hardware; Set of 4
Reproduction of the original wheel opening moldings designed for use on 1966 Impala Bel Air, and Caprice models. Each molding is stamped to original factory specifications with correct contours and finish for an original...
1966 Impala, Bel Air, Biscayne, Caprice; Lower Grill and Extensions; 3 piece Set
Reproduction of the original stamped aluminum lower grill designed for use on 1966 Impala, Bel Air, Biscayne and Caprice models. Reproduced to exact factory specifications using high quality aluminum material offering a...
1964-71 GM; Molding Clip Set; Windshield, Quarter, Back Window; OE Design; Each
Reproduction of the D-shaped windshield and rear window steel molding clip for various 1965-68 Chevrolet models. Manufactured to original OE factory specifications for proper fitment and function. Screw-on type. Use as...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1968-77 GM; Molding Clip; Windshield and Back Window Reveal Molding; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1988-99 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Body Side Molding; Black & Chrome; 25" Roll
Original style body side molding designed for use on 1988-99 Chevrolet and GMC pickup truck, Suburban, Blazer, and Jimmy models. Manufactured like originals but not pre-cut, this molding set features the correct chrome finish...
1964 Impala, Bel Air, Caprice; Rear Cove Quarter Panel Extension Molding; LH Driver Side
Reproduction of the original rear cove quarter panel extension molding designed for use on 1964 Impala and Full Size Chevrolet models with standard trim level. Molding is stamped correctly in quality aluminum material for an...
Reproduction of the original rear cove quarter panel extension molding designed for use on 1964 Impala and Full Size Chevrolet models with standard trim level. Molding is stamped correctly in quality aluminum material for an...
1962 Impala; Tail Panel Cove Moldings; with Hardware; Pair
Correct reproduction of the original tail lamp cove moldings for 1962 Impala and Full size Chevrolet models. These polished aluminum moldings attach to the quarter panel and act as an extension of the trunk lid molding....
1962 Chevrolet Impala; Rocker Panel Molding; with Mounting Clips; RH Passenger Side
Reproduction rocker panel molding for all 1962 Impala models. Each molding is stamped in quality aluminum to exact factory specifications with correct contours and finish Will replace the old or worn out molding while...
1962 Chevrolet Impala; Rocker Panel Molding; with Mounting Clips; LH Driver Side
Reproduction rocker panel molding for all 1962 Impala models. Each molding is stamped in quality aluminum to exact factory specifications with correct contours and finish Will replace the old or worn out molding while...
1963 Impala, Bel Air, Biscayne; Upper Eyebrow Molding; RH Passenger Side
Reproduction of the original front upper eyebrow extension molding designed for use on 1963 Impala and Full Size Chevrolet models. Manufactured in quality stamped aluminum replicating the original molding in fit and...
1962 Chevrolet Impala, Bel Air, Biscayne; Upper Grill Molding
Reproduction of the upper grill molding. This molding attaches to the top of the grill assembly on 1962 passenger models. For use on all Impala, Bel Air and SS models. Important: Grill and grill ornaments are shown in the...
1970-75 Camaro, Firebird, Impala, Caprice; Molding Clip Set; Windshield or Rear Window; 24-Pieces
Correctly configured windshield or rear window molding clips designed to install 1970-1974 windshield or back glass window molding sets on a variety of popular GM models. This 24-piece set of reproduction window molding clips...
Reproduction front windshield and back window molding retainer clip set designed for use with a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is...
1968-on GM; Molding Clip; Windshield, Quarter Window, Rear Window; Skylight; 14 Piece Set
Replacement style rear window glass molding installation clips for 1968-72 Chevy II and Nova models as well as a wide variety of additional GM models. Each clip is designed and manufactured to replicate the OE style clips...
1991-96 Chevrolet Caprice; Front Grill; Chrome & Silver; w/o Fog Lamps;
Reproduction of the original front grill assembly designed for use with 1991-96 Chevrolet Caprice models without fog lamps. This grill is manufactured with injection molded ABS replicating the original in quality, design, and...
1967-72 GM; Molding Clip; Windshield or Back Window; Upper; Lower; Each
Reproduction of the D-Shaped front windshield or back window molding clip for various 1967-72 GM models. Manufactured to factory specifications for proper fitment and function. Use as required. Sold individually. Replaces OE...
Original style capped stud and clip nut designed to protect the owner from accidently cutting hands when reaching into areas like the trunk where the rear panel and quarter molding clips could cause harm. Most commonly used...
1988-2000 Chevy, GMC GMT400, C/K Pickup, Suburban; Rear Wheel Opening Molding; Black; LH Driver Side
OER® Authorized reproduction of the original rear panel wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck and SUV models. Each molding is stamped to original factory specifications featuring...
OER® Authorized reproduction of the original front wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck and SUV models. Each molding is stamped to original factory specifications featuring correct...
1991-96 Caprice / Impala SS Grill Bracket; RH
Install your 1991-96 full size Chevy grill correctly with this original GM replacement grill mounting bracket.
All Years Chevrolet Biscayne Rivet Head Bolt with Nut; Set of 25; Black
Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...
1962-76 Chevrolet, Buick, Oldsmobile; Rocker Molding Clip Set; with Screws; 24 Piece Set
This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water build up between the rail and...
1967-72 GM; Molding Clip; Windshield or Back Window; Upper, Lower; 24 Piece Set
Reproduction of the D-Shaped front windshield molding clip for various 1967-on GM models. Manufactured to factory specifications for proper fitment and function. Use as required. Replaces OE #'s 7698976, 8736591. Sold as a...
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1965-72 GM; Windshield, Back Window Molding Clip; Each
Reproduction of the original style rectangular-shaped front and rear window molding clip designed for use with various 1965-72 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured to factory specifications for...
1959-68 Chevrolet; Grill Attaching Rivet with Nut; Silver Zinc Plating
Reproduction of the original style grill rivet and nut designed for use with various 1959-68 GM applications where a rivet was originally required to install the grill. Each rivet is designed to offer an authentic appearance...
1959 Impala, Bel Air, Biscayne; Front Grill Assembly; Stamped Aluminum; OER
Reproduction of the original stamped aluminum center grill assembly designed for use on all 1959 Chevrolet Impala, Bel Air, Biscayne, Brookwood, Kingswood, Nomad models. This authentically reproduced front grill is...
1963 Impala, Bel Air, Biscayne; Front Grill Assembly; w/ Brackets and Housings; Pre-Assembled
Reproduction of the original front grill assembly for use on Impala. Bel Air and Biscayne models. Each grill is manufactured in quality stamped aluminum to exact factory specifications. Includes correct mounting brackets and...
1964 Impala, Bel Air, Biscayne; Front Grill Assembly; with Brackets; Pre-Assembled
Manufactured by OER to original factory specifications. Each grill is manufactured with quaility stamped aluminum and anodized to OE specifications ensuring a quality fit and appearance. This unique grill allows the installer...
1964 Chevrolet Bel Air, Biscayne, Impala; Front Hood Lip Molding; with Emblem & Hardware
Reproduction front hood lip molding & emblem for 1964 Chevrolet Impala, Bel Air, and Biscayne passenger car models. Each molding is stamped from high grade aluminum duplicating the original GM molding in every detail for an...
1963 Impala, Biscayne, Bel Air; Hood Lip Molding; with Chevrolet lettering; GM Licensed
OER® reproduction hood lip molding for 1963 Chevrolet Impala, Bel Air, and Biscayne passenger car models. Each molding is manufactured in stamped aluminum to factory specifications, ensuring proper fitment and an...
1969 Impala, Bel Air, Biscayne, Caprice; Center Front Grill
OER reproduction center grill assembly for 1969 Impala/full size models. Each Injection molded grill is manufactured to exact original specifications featuring silver paint with black accents. Lower front grill available...