1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1970-75 GM; Windshield Molding Clip; Each
Reproduction of the front and rear window molding clip for various 1970-74 GM models. Manufactured to factory specifications for proper fitment and function. Popular models and applications are listed below, but may fit...
1968 Impala, Bel Air, Biscayne, Caprice; Front Upper Grill
Reproduction of the original front upper grill for use on all 1968 Chevrolet Impala, Bel Air, Biscayne, and Caprice models except Impala SS-427. This grill is manufactured in quality, automotive-grade stamped aluminum to...
1967 Impala, Bel Air, Biscayne, Caprice; Front Grill Kit; Models without Corner Lamps
Reproduction front grill, headlight bezels, and trim for 1967 Chevrolet Impala and full size models (Except Impala SS). These authentic reproduction components are manufactured in quality stamped aluminum material to exact...
1967 Impala, Bel Air, Biscayne, Caprice; Front Grill Kit; models with Optional Corner Lamps
Reproduction of the original front grill, headlight bezels, and grill filler moldings designed for use with 1967 Chevrolet Impala (non SS), Bel Air, Biscayne and Caprice models. These authentic reproduction components are...
1968 Impala, Bel Air, Biscayne, Caprice; Front Lower Grill
Reproduction of the original front lower grill for use on all 1968 Chevrolet Impala, Bel Air, Biscayne, and Caprice models except Impala SS-427. This grill is manufactured in quality, automotive-grade stamped aluminum to...
1965 Impala, Bel Air, Biscayne; Front Grill Assembly
{fitment} Note: Shipped double oversize.
1958 Impala, Bel Air, Biscayne, Del Ray, Brookwood; Front Grill Assembly; Stamped Aluminum; OER
Reproduction of the original stamped aluminum center grill assembly designed for use on all 1958 Chevrolet Impala, Bel Air, Biscayne, Yeoman, Brookwood, and Del Ray models. This authentically reproduced front grill is...
1961 Impala, Bel Air, Biscayne; Lower Front Grill Assembly; GM Licensed
Quality reproduction of the original lower front grill unit designed for use on 1961 Chevrolet Impala , Bel-Air and Biscayne models. Each grill is manufactured from OE grade stamped aluminum replicating the original in every...
1966 Impala, Bel Air, Biscayne; Upper Front Grill Assembly; Stamped Aluminum; OER
Reproduction stamped aluminum upper grill assembly for 1966 Chevrolet Impala, Bel Air, Biscayne and Caprice models. Each grill is reproduced to exact factory specifications using high grade quality aluminum that offers an...
1963 Chevy Impala, Bel Air, Biscayne; Front Grill; Stamped Aluminum
Reproduction of the original front grill designed for use with all 1963 Impala, Biscayne and Bel Air models. This superb reproduction is manufactured in quality stamped aluminum to exact factory specifications replicating the...
1955 Chevy 150, 210, Bel Air, Nomad; Front Grill; Chrome
Reproduction front grill unit for 1955 Chevrolet Bel Air, 150, 210, and Nomad models. Each grill is manufactured to correct factory specifications and features a bright chrome finish replicating the original in design,...
1960 Impala, Bel Air, Biscayne, El Camino; Front Grill Assembly
Reproduction of the original front grill assembly designed for use with 1960 Chevrolet Impala, Biscayne, Bel Air, El Camino, and full size models including station wagons. This reproduction grill is manufactured in quality...
1967 Impala, Bel Air, Biscayne, Caprice; Front Grill; OER
OER reproduction front grill unit for 1967 Chevrolet Impala (standard), Bel Air, Biscayne and Caprice models. This authentic reproduction is manufactured in quality stamped aluminum to exact factory dimensions replicating the...
1964 Chevrolet Impala, Bel Air, Biscayne; Front Grill; GM Licensed; OER
Reproduction of the original front grill designed for use on 1964 Impala, Bel Air and Biscayne models. This reproduction front grill is manufactured in quality stamped aluminum offering an original appearance and fit. Grills...
1956 Chevrolet 150, 210, Bel Air, Nomad; Chrome Front Grill
Reproduction of the original front grill unit designed for use with 1956 Chevrolet Bel Air, 150, 210, and Nomad models. Each grill is manufactured to correct factory specifications and features a bright chrome finish...
1956 Chevy Bel Air, 150, 210, Nomad; Center Hood Bar Molding
Reproduction hood bar molding for 1956 Chevrolet Bel Air, 150, 210, Nomad, and Sedan Delivery models. Features bright chrome plating and the correct factory style mounting points. Mounting hardware included. Features and...
1955 Chevrolet Bel Air, 150, 210, Nomad; Front Grill Molding Set; 4 Piece
Reproduction of the original grill moldings for 1955 Chevrolet Bel Air, 150, 210, and Nomad models. Each molding set features correct contours with a bright chrome plated finish. Mount using original style hardware. 4 piece...
1962 Chevrolet Impala, Bel Air, Biscayne; Front Grill
Reproduction front grill assembly for 1962 Chevrolet Impala, Bel Air and Biscayne models. Each grill is manufactured in quality stamped aluminum replicating the original in quality and fitment. Will replace the old or damaged...
1957 Chevy Bel Air, 150, 210, Nomad; Front Hood Bar Molding
Reproduction of the original hood bar molding designed for use with 1957 Chevrolet Bel Air, 150, 210, Del Ray, and Nomad models. Features correct chrome plating and factory style mounting points. Mounting hardware included....
1962-64 Impala, SS, Bel Air; Back Glass Molding Clip Set
OER® reproduction of the original back window reveal molding clips set designed to fit 1962-64 Impala and Super Sport models 2 door hardtop models. This set of clips will replace the old, damaged or worn out originals and...
1962 Impala, Biscayne, Bel Air; Hood Lip Molding; with "CHEVROLET" lettering; GM Licensed
Reproduction hood lip molding for 1962 Impala, Bel Air, and Biscayne passenger car models. Each molding is stamped from high-grade aluminum and replicates the original design. Features the word "Chevrolet" with black outlined...
1967-85 GM, 1967-81 Camaro, Firebird; Molding Clip Set; Front or Rear Window; Steel; Set of 24
Replacement windshield and rear window molding steel clips to fit a wide variety of applications on various GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary...
1966 Impala, Caprice; Hood Spear Molding; with Hardware
OER® reproduction of the original hood spear molding designed for use on 1966 Impala and Caprice models. Each molding is reproduced to exact specifications and manufactured in a polished zinc die-cast material for an...
1964 Impala, Bel Air, Biscayne; Outer Grill Eyebrow Moldings; RH & LH; Pair
Reproduction of the original front fender lower eyebrow (outer grill) moldings designed for use on 1964 Chevrolet Impala, Bel Air, and Biscayne models. Each molding is a replication of the original GM eyebrow molding found on...
1965 Impala, Bel Air, Biscayne; Hood Spear Molding
OER® reproduction of the original hood spear molding designed for use on 1965 Impala and Ful Size Chevrolet models. Each molding is produced to match the original in quality, fit and appearance. Each molding is precision...
1965-72 GM; Molding Clip Set; Windshield, Quarter, Back Window; 12-piece Set
Replacement style windshield molding installation clips for various GM models including, 1966-67 Chevy II and Nova and 1965-69 Impala and Full Size models. Each clip is designed and manufactured to replicate the OE style...
1963-64 Impala, Bel Air; Windshield Molding Clip Set; 2 Door Hardtop
OER® reproduction of the original windshield reveal molding clips set designed to fit 1963-64 Impala and Super Sport models 2 door hardtop models. This set of clips will replace the old, damaged or worn out originals and...
1962-64 Impala, 1962 Bel Air; Rear Back Glass Molding Set; 2 Door, Hardtop; 5 Piece Set; OER
OER® reproduction of the original back glass molding set designed for use on 1962 Bel Air 2 door hardtop, 1962-64 Impala, and Impala SS, 2-door hardtop models. Each set of back glass moldings is designed to replace the...
1966 Impala, Bel Air, Caprice; Wheel Openining Molding Kit; Front & Rear; with Hardware; Set of 4
Reproduction of the original wheel opening moldings designed for use on 1966 Impala Bel Air, and Caprice models. Each molding is stamped to original factory specifications with correct contours and finish for an original...
1966 Impala, Bel Air, Biscayne, Caprice; Lower Grill and Extensions; 3 piece Set
Reproduction of the original stamped aluminum lower grill designed for use on 1966 Impala, Bel Air, Biscayne and Caprice models. Reproduced to exact factory specifications using high quality aluminum material offering a...
Reproduction upper paint divider moldings for 1955 Chevrolet Bel Air, One-Fifty & Two-Ten Series 2 or 4 door sedan models. This molding mounts at the paint divide between the quarter panel molding and the rear quarter window...
1972-75 GM Full Size; Wheel Well Molding; RH Front
Reproduction of the original wheel opening molding designed for use with 1972-75 Chevrolet full size models. Each molding is manufactured to factory specifications replicating the original GM molding exactly. OER reproduction...
1964-71 GM; Molding Clip Set; Windshield, Quarter, Back Window; OE Design; Each
Reproduction of the D-shaped windshield and rear window steel molding clip for various 1965-68 Chevrolet models. Manufactured to original OE factory specifications for proper fitment and function. Screw-on type. Use as...
1955 Chevrolet Bel Air; Quarter Panel Molding; 2 Door; Stainless Steel; RH, Passenger Side
Reproduction quarter panel molding for 1955 Chevrolet Bel Air, 2 door models. Each molding is manufactured in quality stainless steel replicating the original in design, appearance, and fitment. Fits RH passenger side. Refer...
1962 Bel Air, 1962-64 Impala; Roof Drip Rail Moldings; 2 Door Hardtop; RH & LH; Pair
Reproduction roof drip moldings for 1962-64 Chevrolet Bel Air, and 1962-64 Impala 2 door hardtop models. Each molding is manufactured in stamped aluminum to OE specifications and will replace the old, damaged, or missing...
Reproduction quarter panel top fin chrome molding for 1957 Chevrolet Bel Air 2-Door hardtop or convertible models. These chrome plated die cast fin moldings are manufactured to factory specifications with correct contours for...
1968-77 GM; Molding Clip; Windshield and Back Window Reveal Molding; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1955-57 Chevy Bel Air, 150, 210, Nomad; Lower Windshield Molding Clip Set
Reproduction of the original clips and hardware designed to install the lower moldings on 1955-57 Chevy Bel Air, 150, 210, and Nomad models. When replacing trim pieces on your 1955-57 Chevrolet it's a good idea to replace...
1957 Chevrolet Bel Air, 210, Nomad; Lower Windshield Molding Set; With Wiper Cut-Outs; 3 Pieces
Reproduction windshield moldings for 1957 Chevrolet Bel Air, 210, and Nomad models. Each molding is manufactured to correct dimensions offering an authentic appearance and fitment. Finish is highly polished to bring back the...
1964 Impala, Bel Air, Caprice; Rear Cove Quarter Panel Extension Molding; LH Driver Side
Reproduction of the original rear cove quarter panel extension molding designed for use on 1964 Impala and Full Size Chevrolet models with standard trim level. Molding is stamped correctly in quality aluminum material for an...
Reproduction of the original rear cove quarter panel extension molding designed for use on 1964 Impala and Full Size Chevrolet models with standard trim level. Molding is stamped correctly in quality aluminum material for an...
1962 Chevrolet Impala; Rocker Panel Molding; with Mounting Clips; RH Passenger Side
Reproduction rocker panel molding for all 1962 Impala models. Each molding is stamped in quality aluminum to exact factory specifications with correct contours and finish Will replace the old or worn out molding while...
1962 Impala; Tail Panel Cove Moldings; with Hardware; Pair
Correct reproduction of the original tail lamp cove moldings for 1962 Impala and Full size Chevrolet models. These polished aluminum moldings attach to the quarter panel and act as an extension of the trunk lid molding....
1962 Chevrolet Impala; Rocker Panel Molding; with Mounting Clips; LH Driver Side
Reproduction rocker panel molding for all 1962 Impala models. Each molding is stamped in quality aluminum to exact factory specifications with correct contours and finish Will replace the old or worn out molding while...
1963 Impala, Bel Air, Biscayne; Upper Eyebrow Molding; RH Passenger Side
Reproduction of the original front upper eyebrow extension molding designed for use on 1963 Impala and Full Size Chevrolet models. Manufactured in quality stamped aluminum replicating the original molding in fit and...
1962 Chevrolet Impala, Bel Air, Biscayne; Upper Grill Molding
Reproduction of the upper grill molding. This molding attaches to the top of the grill assembly on 1962 passenger models. For use on all Impala, Bel Air and SS models. Important: Grill and grill ornaments are shown in the...
1955 Chevy Bel Air; Front Fender Molding; Stainless Steel; RH, Passenger Side
Reproduction of the front fender molding for use with 1955 Chevrolet Bel Air models. Each molding is manufactured in quality stainless-steel replicating the original factory design. Features correct contours, finish and...
1962 Impala, Bel Air; Upper Trunk Lid Molding; with Clips
Reproduction of the upper trunk lid molding designed for use on 1962 Impala and Bel Air Chevrolet models. Trunk lid molding fits on the rear upper section of the trunk lid. Each molding is contoured and stamped in quality...
Reproduction of the original upper windshield molding designed for use on various 1955-57 models. This stainless steel molding is manufactured to original factory specifications and features original style contours and...
1957 Chevrolet Bel Air, 210 2-Door; Lower Quarter Molding; Long; Stainless Steel; RH, Passenger Side
Reproduction lower stainless steel long quarter panel molding for 1957 two door Bel Air and 210 models. Each molding is manufactured in quality polished stainless steel to correct factory specifications offering an authentic...
1957 Chevrolet Bel Air, 210 2-Door; Lower Quarter Molding; Long; Stainless Steel; LH, Driver Side
Reproduction lower stainless steel long quarter panel molding for 1957 two door Bel Air and 210 models. Each molding is manufactured in quality polished stainless steel to correct factory specifications offering an authentic...
Reproduction lower corner windshield molding for various 1955-57 Chevrolet Tri-Five models. Each stainless steel molding is manufactured to factory specifications featuring original style contours and correct end shapes to...
1955 Chevy Bel Air; Fender Extension & Door Molding; 2 Door; Stainless Steel; LH Driver Side
Reproduction fender extension and door molding for 1955 Chevrolet Bel Air models. Each molding is manufactured in quality stainless steel replicating the original in every detail. This molding mounts to the front of the door...
1970-75 Camaro, Firebird, Impala, Caprice; Molding Clip Set; Windshield or Rear Window; 24-Pieces
Correctly configured windshield or rear window molding clips designed to install 1970-1974 windshield or back glass window molding sets on a variety of popular GM models. This 24-piece set of reproduction window molding clips...
1957 Chevrolet 210, Bel Air 2-Door, 4 Door; Front Fender Molding; Stainless Steel; LH, Driver Side
This reproduction stainless steel fender molding for 1957 Chevrolet Bel Air and Two-Ten models features correct contours, finish, and mount using original style hardware. The clips that hold the molding on are part number...
1957 Chevrolet Bel Air, 210 2-Door; Door Molding, Stainless Steel; RH, Passenger Side
This reproduction stainless steel door molding for 1957 Chevrolet Bel Air and Two-Ten 2-door models features correct contours, finish, and mount using original style hardware. The clips that hold the molding on are part...
1957 Chevrolet Bel Air, 210 2-Door; Door Molding, Stainless Steel; LH, Driver Side
This reproduction stainless steel door molding for 1957 Chevrolet Bel Air and Two-Ten 2-door models features correct contours, finish, and mount using original style hardware. The clips that hold the molding on are part...
Reproduction front windshield and back window molding retainer clip set designed for use with a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is...