OER® reproduction wing nut for many GM models. This spare tire hold down nut is used in conjunction with the spare tire hold down rod. Manufactured in stamped steel and features correct threads and wing nut design....
1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models
This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...
Molded trunk carpet kit without spare tire cutout and with mass backing designed for use with 1955-57 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series 2 or 4 door models. When it comes to quality,OER® is the most...
1961-64 Impala, Bel Air, Biscayne; Hardtop, Sedan; Trunk Lid Hinges; LH & RH; Pair; EDP Finish
Reproduction trunk lid hinges for 1961-64 Chevrolet Impala, Bel Air, and Biscayne hardtop and sedan models. These hinges are manufactured in quality stamped steel to factory specifications and feature correct torque rod...
1955-57 Chevy Bel Air, 150, 210; Rubber Trunk Mat; Hardtop, Sedan
Reproduction rubber trunk mat for 1955-57 Chevrolet Bel Air, 150, 210 hardtop and sedan models. Each trunk mat is manufactured in quality rubber molded to the floor pan for an authentic fit and appearance. Features a pre-cut...
1955-57 Chevy Bel Air; Rubber Trunk Mat; Convertible
Reproduction rubber trunk mat for 1955-57 Chevrolet Bel Air convertible models. Each trunk mat is manufactured in quality rubber molded to the floor pan for an authentic fit and appearance. Features a pre-cut spare tire cut...
Reproduction rear trunk lid hinges for 1961-64 Chevrolet, 1963-64 Oldsmobile, and 1963-65 Buick full size hardtop and sedan models (will not fit convertible models). The trunk lid hinges are manufactured to factory dimensions...
1955-57 Chevrolet Bel Air, 150, 210; Trunk Spare Tire Well; EDP Coated
Reproduction of the original spare tire well designed for use with 1955-57 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, and Del Ray models except wagon, delivery, and utility vehicles. Each trunk spare tire well is...
1965-74 GM; Spare Tire Hold Down Rod Anchor Plate; Various GM Models; Reproduction
Be sure to protect your spare tire from unnecessary movement by making sure the spare tire anchor plate is correctly mounted. Acts as a clamp by holding the spare tire hold down rod in place after the nut is tightened....
1962-64 Impala, Full Size Hardtop, Sedan; Trunk Lid Hinges; LH & RH; Weld-Thru Primer Finish
Reproduction trunk lid hinges for 1961-64 Chevrolet Impala, Bel Air, and Biscayne hardtop and sedan models. These hinges are manufactured in quality stamped steel to factory specifications and feature correct torque rod...
1955-57 Chevy Bel Air, 150, 210; Rubber Trunk Mat; Without Spare Tire Cut Out
Reproduction rubber trunk mat for 1955-57 Chevrolet Bel Air hardtop and sedan models. Each trunk mat is manufactured in quality rubber molded to the floor pan for an authentic fit and appearance. The rear passenger side area...
1955-57 Bel Air, 150, 210 2 & 4 Dr Station Wagon; Rear Liftgate Supports; Pair
Reproduction liftgate supports for 1955-57 Chevrolet Bel Air, 150, & 210 2 & 4 door station wagon models. Manufactured to factory specifications featuring correct mounting points and a chrome plated finish. Not for use with...
1971-81 Buick, Chevy, Pontiac, Olds;,Rear Trunk Latch Lock Assembly; Various GM Models
Reproduction of the original trunk latch assembly designed for use on various GM models including 1971-81 Camaro and Firebird. This reproduction features a black electrophoretically deposited coating (EDP, or E-coat) for...
1955-57 Chevy Bel Air, 150, 210; Trunk Floor Bumper Jack Storage Set; 3 Piece Set
Reproduction bumper jack storage mounts designed for use with 1955-57 Chevrolet full size models. These hard-to-find parts secure the bumper jack properly in the trunk, keeping it stable and in the correct factory location....
1964-70 Chevelle, Nova, 1962-70 Impala, Full Size; Trunk Striker Panel; EDP Coated
Reproduction of the original trunk lid striker for use with all 1966-70 Chevy II/Nova, and 1962-70 Impala, Bel Air, Biscayne, and Caprice models. Each striker is manufactured in quality stamped steel to factory...
1968-81 GM; Trunk Storage Sleeve, Wheel Jack and Wrench, 16-3/4" x 2-3/4", Large
Correct OER reproduction storage sleeve for the wheel jack and wrench. Found on many GM car models. Manufactured from rubber, this sleeve slides over the jack in the trunk and then secures the wheel lug nut wrench. Measures...
1958-69 Trunk Spatter Paint; Black / Aqua; Aerosol Can; Net Weight 11 oz.; OER
After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...
Reproduction of the original type lock cylinder retainer required on various 1962-91 GM models. If you're replacing your lock cylinder, it will probably be necessary to replace the cylinder retainer. Manufactured in spring...
1970-81 Buick, Chevy, Pontiac, Oldsmobile; Trunk Lock Striker; Various Models
Reproduction of the original trunk lid catch for various 1970-81 GM models including 1970-81 Camaro and Firebird models. Manufactured in stamped steel to the original configuration and features correct mounting points and...
1955-57 Chevy Bel Air, 150, 210; Spare Tire Well & Rocker Panel End Plug
Reproduction of the original style spare tire well and rocker panel end plug designed for use with 1955-57 Chevrolet Bel Air, 150, 210 models as listed. Each plug is manufactured to correct factory specifications replicating...
1/4-20 x 5/8 Hex Head SEMS Machine Screw,.750 Toothed Washer
Reproduction of the original 1/4-20 x 5/8 hex head SEMS machine screw style bolt with.750 toothed washer designed for mounting the trunk latch on various GM models. Manufactured to factory specifications featuring the correct...
1962-81 Trunk Lock Cylinder Gasket ; Die-Cut Replacement
Reproduction die-cut trunk lock cylinder gasket designed to seal the trunk lock cylinder to the body. This gasket is designed for use on the listings below. Each gasket will fit and function as original. This is a non-molded...
Trunk Spatter Paint Clear Topcoat; 16 Oz Aerosol Can; Net Wt. 16 Oz.
After years of use your trunk area is probably in poor condition due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. This is the...
1970-1982 GM: Trunk Spatter Paint; Black / Gray; Aerosol Can; Net Weight 11 oz.; OER
After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...
1965-72 Chevrolet, Oldsmobile; Trunk Lock Cylinder Gasket; Molded Rubber; Various Models
Reproduction of the original trunk lock cylinder gasket designed for use on various GM models. This gasket is used to seal the trunk lock cylinder to the body. Manufactured in quality EPDM molded rubber that replicates the...
1959-72 Buick, Chevy Pontiac, Oldsmobile; Trunk Latch Mounting Bolt Set; Various Models
Reproduction of the original 1/4-20 x 5/8 Hex Head SEMS machine screw style bolt with.750 toothed washer designed for mounting the trunk latch on various GM models. Manufactured to factory specifications featuring the correct...
OER Black and Aqua Trunk Refinishing Kit with Standard Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....
OER Black and Aqua Trunk Refinishing Kit with Self Etching Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...
OER Gray and White Trunk Refinishing Kit with Self Etching Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...
1971-90 Camaro, Firebird, Impala, Nova; Trunk Floor Pan Steel Access Plug; Various Models
Reproduction rear cross rail and trunk floor access plug originally installed on 1971-81 Camaro, Firebird, and other GM models as listed. Plugs are manufactured in steel to factory dimensions and will replace the original...
Trunk Spatter Paint; Gray / White; Aerosol Can; Net Weight 11 oz.; OER
After many years, your trunk area may need attention due to water damage or other factors. If you are replacing your trunk pan then spraying the trunk is a must, even if you're installing a trunk mat. OER's newly formulated...
OER Black and Gray Trunk Refinishing Kit with Standard Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. High...
OER Gray and White Trunk Refinishing Kit with Standard Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....
OER Black and Gray Trunk Refinishing Kit with Self Etching Gray Primer
Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...