This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and Pontiac...
This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 65-70 Chevrolet Chevelle, Buick, Skylark, and Pontiac GTO models. These gearsets are heat treated...
1967-68 Camaro; Floor Shifter Assembly; ITM Style; Muncie 4/Speed
Quality OER® reproduction ITM Style shifter assembly for 1967-68 Camaro models with 4-speed transmission. Assembly will replace worn or damaged originals. This shifter mounts to your crossmember just like the factory...
Reproduction 4-speed shifter and linkage assembly for 1968-72 Chevelle, Malibu, and El Camino models, as well as 1970-72 Monte Carlo, equipped with a Muncie 4-speed transmission. Manufactured to factory specifications, this...
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick...
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 32 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fits various 1970-74 GM vehicles Including Chevrolet Chevelle, Buick...
1965-67 Chevy II / Nova; Hurst Competition Linkage Kit; Muncie Transmission; 4 Speed
Hurst competition linkage kit for use with 1965-67 Chevy II Nova models equipped with Muncie 4/speed transmissions. This installation kit includes all the necessary components and hardware required to replace the linkage. It...
1956 Chevrolet 150, 210, Bel Air; Clutch Linkage Set
Replacement clutch linkage set for all 1956 Chevy passenger cars with manual transmissions. It includes high-quality reproduction components to restore proper clutch operation. Perfect for restoring original performance and...
1957 Chevrolet 150, 210, Bel Air; Clutch Linkage Set
Replacement clutch linkage set for all 1957 Chevy passenger cars with manual transmissions. It includes high-quality reproduction components to restore proper clutch operation. Perfect for restoring original performance and...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...
1982-02 Camaro, Firebird; Round Shift Knob; Leather Wrapped; Manual Trans; Black
Reproduction of the factory original leather-wrapped shift ball to fit various 1982-02 Camaro Z28 and Firebird models equipped with 5-speed and 6-speed manual transmissions. Each reproduction shift ball is manufactured in...
Reproduction of the original style shifter arm for use with various 1964-67 Chevrolet models as listed below. This unique shifter arm is an excellent replacement for a damaged original shifter mechanism. Replaces the Muncie...
This unique chrome shifter arm is an excellent replacement for all damaged original shifter mechanisms. Fits 1965-67 models with front bucket seats.
Reproduction 4-speed shifter handle for 1968-72 Chevrolet Chevelle and El Camino, 1970-72 Chevrolet Monte Carlo, and 1971-72 GMC Sprint models equipped with a factory center console. Manufactured to factory specifications,...
Reproduction 4-speed shifter handle for 1968-72 Chevrolet Chevelle and El Camino, 1970-72 Chevrolet Monte Carlo, and 1971-72 GMC Sprint models without a factory center console. Manufactured to factory specifications, this...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1964-67 Chevelle, El Camino, Clutch Bell Crank; Cross Shaft, Z-Bar; Big Block Engines
Reproduction of the original clutch bell crank for use with 1964-67 Chevelle & El Camino with big block engines. What the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
1968-72 Chevy II, Nova; Shifter Stabilizer Rod Assembly
Quality reproduction of the original shifter stabilizer rod assembly for use with 1968-72 Chevy II and Nova models. Manufactured to original GM specifications, this stabilizer rod goes from the shifter assembly to the...
Highly polished triple chrome plated reproduction of the original chrome shift knob designed specifically for 1964-67 Chevelle, El Camino, Impala, Bel Air, Biscayne, Caprice, Chevy II Nova, and Malibu models with 1-3/4" dia....
1982-86 Camaro, 1991-99 Camaro, 1982-83 Firebird; Shift Knob Ball; with Manual Transmission; Black
Correct reproduction shift knob for 1982-86 Camaro, 1991-99 Camaro, and 1982-83 Firebird / Trans Am models. Each knob is manufactured to correct factory dimensions replicating the original shift knob in design, appearance,...
Muncie 4-speed manual transmission shifter bracket for 1968-72 Skylark, Cutlass, Chevelle, El Camino and 1970-72 Monte Carlo models. This bracket is welded to the transmission crossmember and the shifter mounts to it. Used to...
1968-72 Chevrolet Chevelle, El Camino; 4-Speed Manual Transmission; Shifter Support Rod
Reproduction Muncie shifter loewer support rod 1968-72 Chevelle and El Camino models with manual transmission. This rod/support is 5 inches long and goes from the shifter to the crossmember to stabalize the shifter. Sold...
1967 F-Body Frame Side Clutch Pivot Ball Bracket
OER® Reproduction of the frame side clutch pivot ball bracket. Features the correct offset and holes as original and is used for L6, small block and big block models. Applications 1967 Camaro 1967 Firebird You are assured...
1968-72 Various GM Vehicles Including Chevelle, LeMans, Cutlass; Upper Clutch Rod; Pedal To Z Bar
Reproduction of the correct clutch rod for 1968-72 Pontiac GTO Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from the Z bar to the clutch pedal. They...
1969 Camaro, 1968-69 Firebird; Floor Shifter Assembly; with 4 Speed Hurst
Reproduction of the original style Hurst 4 speed shifter designed for use on 1968-69 Firebird, and 1969 Camaro models with a Muncie transmission. This assembly will replace worn or damaged original shifter assemblies. This...
1967-68 Camaro; Floor Shifter Assembly; with Saginaw 4/Speed; ITM Style;
Reproduction of the original ITM Style shifter assembly for 1967-68 Camaro models with a Saginaw 4-speed transmission. Each shifter is manufactured to factory specifications for an authentic appearance and fitment Mounts to...
1958-83 GM; Clutch Bellcrank Pivot Ball; Block Side; Screw-In Type; 3" Overall Length
This is an exact reproduction of the original block side pivot ball screw designed for use with various 1958-83 GM models as listed. Each clutch bellcrank pivot ball is manufactured from hardened steel replicating the...
1968-72 Chevy II Nova; Floor Shifter; Saginaw 4-Speed; with Bench Seat; w/o Console
Reproduction of original Saginaw 4/speed shifter assembly that was installed on 1968-72 Nova models with a bench seat, and without a floor console. This complete shifter assembly is manufactured to OE specifications and...
1965-67 Impala/Full Size; Shift Linkage Install Kit
1965-1967 Impala / Caprice / Bel Air Linkage Install Kit including Shifter Rods, Lever Arms & Bracket for Hurst 4 Speed 3912747 Competition Plus Shifter connected to factory Muncie type 451 transmission. Replaces OE #...
Shifter Install Kit; For Hurst Shifter and Muncie 452/453 Transmissions
Reproduction shifter installation kit required to fit a Competition Plus Shifter on various GM models including 1969-70 Chevy Nova models equipped with Muncie 452 or 453 transmissions. It will work with or without the factory...
1970-74 Camaro, Firebird; Muncie Reverse Lock Out Linkage Set; 4 Speed; Small, Big Block
Reproduction of the original style lock out linkage set for 1970-74 Camaro and Firebird models with Muncie 4-speed transmissions. Designed for use with small block or big block models. Includes fully assembled bellcrank,...
1955 Chevrolet 150, 210, Bel Air; Clutch Linkage Set
Replacement clutch linkage set for all 1955 Chevy passenger cars with manual transmissions. It includes high-quality reproduction components to restore proper clutch operation. Perfect for restoring original performance and...
1967-1971 GM; Various Models; Hurst 4-Speed Shift Knob; 1-3/4" with 3/8"-16 Thread; White
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This white shift knob is manufactured in quality ABS with a steel insert. This 1-3/4" shift knob can be installed on most factory shifters with the...
1967-69 Camaro; Floor Shift Boot, without Console; Manual Trans
Reproduction of the original floor shift boot for use on all 1967-68 Camaro 3 and 4 speed models without center console. Also fits 1969 Camaro 3 speed models without center console. The lower boot is manufactured from quality...
1967-69 Camaro Big Block, 1968-72 Chevy II / Nova Big Block Clutch Fork Return Spring
OER® reproduction clutch fork return spring. Attaches from the engine mounting bracket to the clutch extension wire. Measures 5-1/8" O.L. 2-3/4" spring portion. You are assured that every OER® part offe red is...
Reproduction of the factory Muncie 4-speed style shifter arm for various 1965-66 Chevrolet Impala. Bel Air, Caprice, and 1967 Chevelle, Malibu, and El Camino models. This unique shifter arm is an excellent replacement for a...
A reproduction installation set for use when installing a Hurst Competition Plus shifter on 1968 and earlier Muncie 451 transmission. See various applications listed. Can also be used for custom installs on various passenger...
Very good reproduction shift lever/arm 1968-1972 Chevelle, El Camino and 1970-72 Monte Carlo with manual transmission. This is a chrome shifter lever with "MUNCIE" embossed on the side. This is for applications that do not...
Great reproduction 1968-1972 Chevelle, El Camino and 1970-72 Monte Carlo with manual transmission. This is a chrome shifter lever with "MUNCIE" embossed on the side. This is for applications with bucket seats and that do have...
1964-67 Chevelle, El Camino, Clutch Bell Crank; Cross Shaft, Z-Bar; Small Block; 283ci, 327ci
Reproduction of the original cross shaft Z bar for use with 1964-67 Chevelle and El Camino models. What the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress...
1963-71 GM; Various Models; Hurst 4-Speed Shift Knob; 3/8" Thread; Black With Chrome Base
Reproduction shift knob used with GM 4 speed Hurst transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1967-68 Camaro; Shifter Stabilizer Bar
OER® Authorized reproduction of the shifter stabilizer rod also known as the front strut rod transmission mounting bracket for 1967-68 Camaro models. This stabilizer rod goes from the shifter assembly to the transmission...
1967-72 Clutch Fork Return Spring Extension Bracket ; Big Block
OER® reproduction of the original clutch fork return spring bracket installed on various GM models with a factory installed big block engine. Allows correct function and mounting of the clutch fork return spring....
1959-62 Corvette; Shift Boot; 4-Speed
Correct reproducton shif boot for 1959-62 Chevrolet Corvette 4-speed models. Manufactured to factory specifications from injection molded EPDM rubber as original.
1967 Chevrolet Chevelle Models; Upper Clutch Rod; Pedal To Z Bar
This rod goes from the clutch pedal to the z-bar for 1967 Chevrolet Chevelle, El Camino upper clutch push rod. Replace the bent or just worn out rod with this great reproduction today.
Hurst Quarter Stick shifter and Dual Gate Shifter Arm transmission select lever for 1967-92 Camaro and Firebird using a Trubo-Hydramatic 350 or 400 tranmissions. using Hurst Quarter Stick shifter 3160001, 3160006 and 3160016,...
1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield
Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...
1964-1981 Various GM Applications; Hurst 4 Speed; Shift Retainer Plate GM# 1952029
Replacement shifter retainer plate designed to tighten up worn Hurst 4 speed shifters for various 1964-81 GM models including Impala, GTO, Skylark models. The heavy stamped steel plate bolts between the shifter arm and body...
This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and...
1964-67 Chevy II Nova; Muncie Shifter Kit; 4 Speed ; with Bucket Seats
Factory-look Muncie shifter assembly for use with 1964-67 Chevy II Nova models with bucket seats. The stock Muncie shift gates were prone to malfunction. This kit maintains the look of the original shifter while increasing...
1964 Impala, Bel Air, Biscayne; Speedometer; GM Licensed
Reproduction of the original speedometer assembly designed for use with 1964 Chevrolet Impala, Bel Air, and Biscayne models. Each speedometer is manufactured to correct factory specifications. Features correct markings, turn...
1967-69 Camaro, 1968-73 Nova; Floor Shift Boot, with Floor Console, Manual Transmission
OER reproduction of the original floor shift boot manufactured in quality molded rubber replicating the original GM boot in authenticity and fitment. Originally installed on all 1967-68 Camaro models with 4 speed trans, 1969...
1970-81 Camaro, Firebird; Gearshift Boot Retainer Plate; for Manual Trans; Black
Reproduction shift boot retainer plate for 1970-81 Camaro and Firebird models with 3-speed or 4-speed manual transmissions. Each gearshift boot retainer plate is manufactured in stamped steel replicating the original design...
1967-72 Small Block Clutch Fork Return Spring
OER® reproduction clutch fork return spring. Attaches from the engine mounting bracket to the clutch extension wire. Measures 3-5/8" O.L. 2-1/2" spring portion. Applacations: 1967-69 Camaro small block 1967-69 Firebird...
1967-75 Return Spring Extension Rod
Correct reproduction of the original return spring extension rod designed for use on various GM models as listed. This rod is used in conjuntion with the clutch fork return spring. Together they connect the clutch fork to the...
1971-72 Chevelle SS, Monte Carlo; Speedometer; 120 MPH; White Markings
Reproduction speedometer for 1971-72 Chevelle and Monte Carlo models. Each gauge is manufactured to original specifications including the correct faceplate featuring white silkscreened markings that replicate the original in...
1970-81 Camaro, Firebird; Lower Shift Boot Seal; with Manual Trans
Reproduction of the original lower shift boot seal designed for use with 1970-81 Camaro and Firebird models with manual transmissions. Each boot is manufactured in quality EPDM rubber replicating the original in design,...
1947-55 Chevy, GMC Truck; Transmission Cover Plate; 3-Speed; MT; EDP Coated
Reproduction of the original transmission cover plate designed for use with 1947-55 truck models with a 3-speed manual transmission and column shift. Each cover plate is manufactured in stamped steel to original factory...