1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair
Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....
1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; RH Passenger Side; Various Models
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
1955-57 Chevy Bel Air, 150. 210; Upper Control Arms; Rubber Bushings; Pair
New stock style upper control arms for 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Includes a pair with cross shafts, bushings, and ball joints installed. These are made from heavy gauge steel and black...
1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; LH Drivers Side; Various Models
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
1963-70 Chevy and GMC Truck; Tubular Lower Control Arms; Pair
Replacement tubular lower control arms for 1963-70 Chevrolet and GMC 1/2 Ton C10 pickup, panel, and Suburban models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints pre-installed. Each...
1963-70 Chevy and GMC C10 Truck; Tubular Upper Control Arms; Pair
Replacement style tubular upper control arms for 1963-70 Chevrolet and GMC truck models. These upper control arms are manufactured from heavy gauge tubular steel. Each control arm is finished in black powdercoat for an...
1971-72 Chevy and GMC Truck; Tubular Upper Control Arms; Pair
Replacement style tubular upper control arms designed for 1971-72 Chevrolet and GMC truck models. These upper control arms are manufactured from heavy gauge tubular steel. Each control arm is finished in black powdercoat for...
1963-70 Chevrolet C10; Tubular Control Arm Set; Coil Over Type; Upper and Lower
Gain 21st century handling in your classic Chevy C10 truck. This is an upper and lower front tubular control arm set for conversion to coil-over shocks. Each set includes upper and lower tubular control arms, and upper...
1955-57 Chevy Bel Air, 150. 210; Lower Control Arms; Rubber Bushings; Pair
New stock style lower control arms designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints pre-installed. Each lower...
1958-64 Impala; Lower Control Arms; Rubber Bushings; Pair
New stock style lower control arms designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and full size models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints...
1967-69 Camaro, Firebird; 1968-74 Nova; Upper Control Arms; Pair
Reproduction upper control arms for various GM models including 1967-69 Camaro, Firebird, and 1968-74 Chevy II, Nova models. These reproduction upper control arms includes pre-installed bushings, shafts and ball joints. If...
1970-81 Camaro, Firebird; Tubular Lower Control Arm Set; Pair
Enhance the handling performance of your 1970-81 Camaro or Firebird with these quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension...
1964-74 Chevy, Pontiac, Oldsmobile; Lower Control Arm Bolt; 1/2"-13 x 3-3/4"; Each
OER reproduction bolt used to install the lower control arms on various GM models. Fits front lower control arms. The bolts are made from high strength grade 8 steel which as been formed and thread rolled to exact OE specs...
1963-70 Chevy Pickup, Blazer, Suburban; Van; Upper Control Arm; C10; Passenger Side
Reproduction of the original upper control arm designed for use with 1963-70 Chevrolet and GMC Pickup, Suburban, Panel Truck, Crew Cab, Blazer and Jimmy 1/2 ton, 2 wheel drive models. Also fits 1970 Chevrolet G10/G20 Van, and...
1973-91 Chevrolet, GMC 3/4, 1 Ton 2WD Truck; Lower Control Arm; LH Driver Side
Reproduction of the original lower control arm designed for use with 1973-1991 Chevrolet and GMC truck models with 3/4 ton or 1 ton suspension. This control arm is manufactured in stamped steel to correct factory...
1958-64 Impala / Full Size Upper Control Arm; RH
This is a reproduction of the right hand upper control arm used on 1958-64 full size models. For left hand side use Part # A1000. Note: This is the control arm only, ball joints, bumpers, shafts and bushings are sold...
1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft Set; Pair
Reproduction of the original style upper control arm shafts for 1958-1964 Chevrolet Impala, Bel Air, and Biscayne models. Each set is engineered to restore proper suspension alignment and factory-correct performance while...
1973-86 Chevrolet, GMC Pickup; Upper Control Arm; 1/2 Ton; Passengers Side
Reproduction upper control arm for 1973-1986 Chevrolet and GMC truck models with 1/2 ton suspension. This control arm is manufactured in stamped steel to correct factory specifications replicating the original in quality,...
1973-86 Chevrolet, GMC Truck; Upper Control Arm; 1/2 Ton; LH Driver Side
Reproduction upper control arm for 1973-1986 Chevrolet and GMC truck models with 1/2 ton suspension. This control arm is manufactured in stamped steel to correct factory specifications replicating the original in quality,...
1973-91 Chevrolet/GMC C20/C30 Truck; Upper Control Arm; 3/4, 1 ton; 2 WD; LH Driver Side
Reproduction of the original upper control arm designed for use with 1973-1991 Chevrolet and GMC truck models with 3/4 ton or 1 ton suspension. This control arm is manufactured in stamped steel to correct factory...
1955-57 Chevy Bel Air, 150, 210; Upper Control Arm Shaft Set; with Rubber Bushings; RH & LH; Pair
Reproduction upper control arm shaft set for 1955-57 Chevrolet full size models. Each shaft is manufactured to factory specifications and engineered with an additional 2 degrees of caster built in. The added caster greatly...
1963-96 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Lower Control Arm Shaft Kit; 2 Wheel Drive
Reproduction control arm shaft kit, precision engineered and rigorously tested to provide a dependable replacement for the original equipment shaft. Designed as a direct fit component, this shaft installs and functions...
1958-64 Impala, Bel Air, Biscayne, 1965-82 Corvette; Lower Control Arm Shaft; LH or RH; Each
Quality reproduction lower control arm cross-shaft for various 1958-1964 Chevrolet Impala, Bel Air, Biscayne, and 1963-1982 Corvette models. Each shaft is manufactured from high quality stamped steel and built to original...
Reproduction control arm shaft kit, precision engineered and rigorously tested to deliver a dependable replacement for the original equipment shaft. Designed as a direct replacement, this component fits and functions exactly...
1963-82 Corvette; Control Arm Bumper; Upper; Front
Replacing the control arm bumper can help bring the suspension back to factory original condition and keep it from bottoming out.
1971-87 Chevrolet & GMC C10/C15 Truck; Tubular Lower Control Arms; Pair
Replacement tubular lower control arms designed for 1971-87 Chevrolet and GMC 1/2 Ton C10/C15 pickup, panel, and Suburban models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints...
1955-57 Chevy, Bel Air, 150, 210; Tubular Control Arm Set; Upper & Lower; 4 Piece Set
These tubular control arms are engineered for maximum strength and significantly enhanced handling performance for 1955-57 Chevrolet passenger car models. Stronger and lighter than the original stamped steel arms, these...
1958-64 Impala, Bel Air, Biscayne; Upper Control Arms; Rubber Bushings; Pair
New stock style upper control arms designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and full size models. Includes both RH and LH upper control arms with cross shafts, bushings, and ball joints...
1973-87 Chevrolet C10; Tubular Control Arm Set; Air Ride Type; Upper and Lower
Gain 21st century handling in your classic Chevy C10 truck. This is an upper and lower front tubular control arm set for conversion to air bag setup. Each set includes upper and lower tubular control arms set up for use with...
Reproduction lower control arms for various 1978-87 GM vehicles including 1978-87 Buick Regal, Grand National, Type T, and GNX models. Each control arm is manufactured from heavy duty steel and built to exact factory...
Reproduction upper control arms for various 1978-87 GM A and G Body intermediate vehicles including 1978-87 Buick Regal models. Each control arm is manufactured from heavy duty steel and built to factory specifications for...
Reproduction control arm bushing cap designed for use on 1962-1967 Chevy II and Nova front lower control arms, as well as 1963-1979 Corvette rear strut rods. This cap is essential for proper fitment when replacing lower...
1970-81 Camaro, Firebird; Tubular Upper Control Arm Set; Pair
Enhance the handling performance of your 1970-81 Camaro or Firebird with these quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension...
1963-70 Chevy Pickup, Blazer, Suburban; Van; Upper Control Arm; C10; Drivers Side
Reproduction of the original upper control arm designed for use with 1963-70 Chevrolet and GMC Pickup, Suburban, Panel Truck, Crew Cab, Blazer and Jimmy 1/2 ton, 2 wheel drive models. Also fits 1970 Chevrolet G10/G20 Van, and...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Lower; LH Driver Side
Reproduction lower control arm for use on a variety of 1964-72 GM A-Body models. Each control arm is manufactured in stamped steel to OE specifications for a precise fit and reliable performance. This complete assembly...
1981-91 Chevrolet/GMC 1 ton 2 WD HD Truck; Lower Control Arm; RH Passenger Side
Reproduction of the original lower control arm designed for use with 1981-1991 Chevrolet and GMC truck models with 1 ton heavy duty suspension. This control arm is manufactured in stamped steel to correct factory...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Lower; RH Passenger Side
Reproduction lower control arm for use on various 1964-72 GM A-Body models. Manufactured in stamped steel to OE factory specifications for a precise fit and reliable performance. Each assembly includes pre-installed round...
1988-02 Chevrolet/GMC Truck; Lower Control Arm; 2WD; 1/2, 3/4, 1 Ton; LH
Reproduction of the original upper control arm for 1988-2002 Chevrolet and GMC truck models with 1/2 ton, 3/4 ton or 1 ton suspension, and 2000 Cadillac Escalade models. This control arm is manufactured in stamped steel to...
1988-02 Chevrolet/GMC Truck; Lower Control Arm; 2WD; 1/2, 3/4, 1 Ton; RH
Reproduction of the original upper control arm for 1988-2002 Chevrolet and GMC truck models with 1/2 ton, 3/4 ton or 1 ton suspension, and 2000 Cadillac Escalade models. This control arm is manufactured in stamped steel to...
1962-67 Chevy II Nova; Upper Control Arm; with Ball Joint and Bushing; LH or RH
Reproduction upper control arm, shaft and ball joint assembly for 1962-67 Chevrolet Chevy II/Nova and Pontiac Acadian models. Each control arm assembly is manufactured in quality stamped steel to the factory configuration...
1973-91 Chevrolet/GMC C20/C30 Truck; Lower Control Arm; 3/4, 1 ton; 2 WD; RH Passenger Side
Reproduction of the original upper control arm designed for use with 1973-1991 Chevrolet and GMC truck models with 3/4 ton or 1 ton suspension. This control arm is manufactured in stamped steel to correct factory...
1958-64 Impala / Full Size Upper Control Arm; LH
This is a reproduction of the upper left hand control arm used on 1958-64 full size models. Note: This is the control arm only, ball joints, bumpers, shafts and bushings are sold separately. For rig ht hand side use Part #...
1973-91 Chevrolet, GMC C10/R10 Truck; Upper Control Arm; 1/2 ton; 2 WD; LH Driver Side
Reproduction upper control arm for 1973-1986 C10 and 1987-91 R10 Chevrolet and GMC 2WD truck models. This control arm is manufactured in stamped steel to correct factory specifications replicating the original in quality,...
1973-91 Chevrolet, GMC C10/R10 Truck; Upper Control Arm; 1/2 ton; 2 WD; RH Passenger Side
Reproduction upper control arm for 1973-1986 C10 AND 1987-91 R10 Chevrolet and GMC 2WD truck models. This control arm is manufactured in stamped steel to correct factory specifications replicating the original in quality,...
1970-96 Buick, Chevrolet, Pontiac, Oldsmobile; Lower Control Arm Bumper, Each, Various Models
OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...
1977-96 GM; Upper Control Arm; With Shaft; RH
Replacement upper control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement upper control arm includes pre-installed bushings and ball...
1955-57 Bel Air, 150, 210; Lower Control Arm Rubber Bumper; Each; OER
Reproduction of the original front lower control arm bumper designed for use on all 1955-57 Chevrolet car models. This control arm bumber is manufactured in hard rubber with the correct threaded mounting stud as original....
1958-64 Impala, Bel Air, Biscayne; Lower Control Arm Shafts; Pair
Reproduction of the original style lower control arm shafts for 1958-1964 Impala, Bel Air, Biscayne, and other full size Chevrolet models. Each set is designed to restore proper suspension geometry while maintaining an...
1973-91 Chevrolet/GMC C20/C30 Truck; Upper Control Arm; 3/4, 1 ton; 2 WD; RH Passenger Side
Reproduction of the original upper control arm designed for use with 1973-1991 Chevrolet and GMC truck models with 3/4 ton or 1 ton suspension. This control arm is manufactured in stamped steel to correct factory...
1955-57 Chevy Bel Air, 150, 210; Lower Control Arm Shaft Set; with Rubber Bushings; Pair
Reproduction lower control arm shaft for 1955-1957 Chevrolet Bel Air, 150, 210, and Nomad models. This high quality replacement shaft is designed to restore proper suspension function while maintaining an accurate...
1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft; Pair; LH & RH; Pair
Quality reproduction lower control arm cross-shafts for various 1958-1964 Chevrolet Impala, Bel Air, and Biscayne models. Each shaft is manufactured in high quality stamped steel and built to original factory specifications...
Reproduction control arm shaft kit, precision engineered and rigorously tested to deliver a dependable replacement for the original equipment shaft. This direct fit replacement installs and functions exactly like the factory...
1973-91 Chevy, GMC 1/2 Ton Pickup, Blazer, Suburban, Van; Upper Control Arm Shaft Kit; 2 Wheel Drive
Reproduction control arm shaft kit, precision engineered and thoroughly tested to deliver a reliable replacement for the original equipment shaft. Designed as a direct replacement, this shaft fits and functions exactly like...
1958-64 Impala; Bel Air; Biscayne; 1963-82 Corvette; Lower Control Arm Bumper
Replacing the control arm bumper can help bring the suspension back to factory original condition and keep it from bottoming out.
1981-91 Chevrolet/GMC 1 ton HD 2WD Truck; Lower Control Arm; LH Driver Side
Reproduction of the original lower control arm designed for use with 1981-1991 Chevrolet and GMC truck models with 1 ton heavy duty suspension. This control arm is manufactured in stamped steel to correct factory...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Upper; RH Passenger Side
Reproduction upper control arm for various 1964-72 GM A-Body models including Chevelle, Malibu, El Camino, Monte Carlo, GTO, Lemans, Tempest, Cutlass, F85, 442, Skylark, Special, GS models. This reproduction upper control arm...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Upper; LH Driver Side
Reproduction upper control arm for various 1964-72 GM A-Body models including Chevelle, Malibu, El Camino, Monte Carlo, GTO, Lemans, Tempest, Cutlass, F85, 442, Skylark, Special, GS models. This reproduction upper control arm...
1961-75 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bumper; Each
Quality reproduction of the original upper control arm bumper designed for use with various 1967-75 General Motors models. Each bumper is manufactured in heavy duty EPDM molded rubber material to original specifications...
1966-74 Camaro, Firebird, Nova; Lower Control Arm Bushing; Each
Chevrolet Applications: 1967-1968 Chevrolet Camaro (toward front of vehicle) 1969-1969 Chevrolet Camaro (toward front of vehicle) 1970-1970 Chevrolet Camaro (toward rear of vehicle) 1966-1969 Chevrolet Chevelle (toward rear...
1962-67 Chevy II, Nova; Upper Control Arm Bushing; Each
Reproduction of the original style upper control arm bushing designed for use on 1962-67 Chevy II and Nova models. If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about...