1967 Chevrolet Nova SS; Trunk Lid Panel Molding; Die-Cast
OER reproduction rear trunk lid molding for 1967 Chevrolet Nova Super Sport models. Each molding is manufactured in high-quality die-cast zinc featuring the correct paint scheme and a chromed finish replicating the original...
1970-72 Chevrolet Nova SS; Rear Panel Molding; Die-Cast; OER Reproduction
Reproduction rear body panel trim molding for 1970-72 Nova Super Sport models. Installs on the rear body panel between the rear tail lamps. Features the correct SS emblem spun welded to the molding as original finished in the...
1966 Chevy II, Nova SS; Trunk Lid Rear Panel Molding; Die-Cast Reproduction
OER® reproduction rear trunk lid molding for 1966 Chevrolet Nova Super Sport models. Each molding is manufactured in high-quality die-cast zinc featuring the correct factory paint scheme and a bright chrome finish that...
1964 Impala SS; Trunk and Rear Cove Panel Molding Kit; without Trunk Spear
Reproduction of the original rear deck panel molding kit designed for use 1964 Impala SS models. Each molding is manufactured to correct OE specifications replicating the original in every detail. Note: Chevrolet emblem sold...
1964 Chevrolet Impala; Trunk And Rear Cove Panel Molding Kit; with Trunk Spear
Reproduction of the original style rear deck panel moldings desogned for use with 1964 Chevrolet Impala standard models except station wagons. Each molding is manufactured to correct factory specifications for an authentic...
1962-65 Chevy II Nova; Upper Trunk Cove Molding
Quality reproduction 1962-65 Chevy II and Nova upper trunk cove molding. Moldings are manufactured in stamped aluminum replicating the original in appearance and fit. Replace your dented or missing cove moldings and restore...
1962 Impala; Tail Panel Cove Moldings; with Hardware; Pair
Correct reproduction of the original tail lamp cove moldings for 1962 Impala and Full size Chevrolet models. These polished aluminum moldings attach to the quarter panel and act as an extension of the trunk lid molding....
1962 Impala, Bel Air; Upper Trunk Lid Molding; with Clips
Reproduction of the upper trunk lid molding designed for use on 1962 Impala and Bel Air Chevrolet models. Trunk lid molding fits on the rear upper section of the trunk lid. Each molding is contoured and stamped in quality...
1967 Chevrolet Chevelle, Malibu; Rear Tail Panel Molding; Lower
Reproduction rear tail lamp panel molding for 1967 Chevelle or Malibu models. Each molding is manufactured to factory specifications featuring the correct original factory design, appearance, and fitment. Comes complete with...
1967 Chevrolet Chevelle, Malibu; Rear Tail Panel Molding; Upper
Reproduction rear tail lamp panel molding for 1967 Chevelle or Malibu models. Each molding is manufactured to factory specifications featuring the correct original factory design, appearance, and fitment. Comes complete with...
1967 Chevelle, Malibu; Trunk Lid Lip Molding; With Hardware
Quality reproduction 1967 Chevelle and Malibu trunk lid lip molding. Moldings are manufactured in stamped aluminum replicating the original in appearance and fit. Replace your dented or missing moldings to restore the factory...
1966 Chevrolet Chevelle, Malibu; Rear Tail Lamp Panel Molding; Fits Upper or Lower; Each
Reproduction rear tail lamp panel molding for 1966 Chevelle or Malibu models. Each molding is manufactured to factory specifications featuring the correct original factory design, appearance, and fitment. Comes complete with...
1964 Impala SS Trunk And Rear Cove Panel Molding Kit With Trunk Spear
Reproduction of the rear deck panel molding set designed foruse on 1964 Impala SS models. Each molding is manufactured to exact factory specifications and will replace the original exactly. Replace the old or worn out rear...
1957 Chevy Bel Air, 150, 210; Vertical Tail Fin Molding Set; 4 Piece Set
Reproduction quarter vertical fin moldings for 1957 Chevrolet Bel Air, 150, and 210 models. Feature stainless finish, correct contours, and mount just like the originals. Sold in 4-piece sets. Features and Benefits:...
1970-72 Chevy Nova; Rear Body Panel Molding; Standard Models; Die-Cast; OER Reproduction
Reproduction rear body panel trim molding for 1970-72 Nova models. Installs on the rear body panel between the rear tail lamps. Each panel is manufactured in quality die-cast metal replicating the original in design,...
1964 Impala, Bel Air, Biscayne; Center Rear Cove Molding; Standard Models
Reproduction of the original rear cove center panel molding designed for use on 1964 Impala and Full Size Chevrolet models with factory standard trim level. Each molding is stamped from quality aluminum material in the...
1964 Impala Standard Model Rear Cove Panel Molding Kit
Reproduction rear cove panel moldings with lettering as original. Kit includes: Center molding with letters RH quarter extension molding LH quarter extension molding Mounting clips These are exact reproduction moldings...
1964 Impala, Bel Air; Trunk Center Molding; Trunk Spear; with Hardware
Reproduction of the original Chevrolet Impala or Bel Air center trunk split molding designed for use on 1964 models. This center trunk molding runs down the center of the trunk lid and sections off the RH from the LH sides....
1962-65 Chevy II / Nova; Outer Trunk Cove Molding; Pair
Quality reproduction of the outer trunk cove moldings for all 1962-65 Chevy II/Nova models except wagon. Reproduced to exact OE specifications for a perfect fit and original appearance. Fits hardtop, sedan and convertible...
1964 Impala SS, Bel Air, Biscayne; Upper Trunk Lid Molding; Except Station Wagon
Reproduction of the original upper trunk molding designed for use with 1964 Impala SS, Bel Air, and Biscayne models. Each molding is manufactured in bright finished stamped aluminum replicating the original contour and...
Reproduction of the original outer tail cove moldings designed for use with 1964 Impala SS, Bel Air and Biscayne models. Each molding is manufactured in bright finished stamped aluminum replicating the original contour and...
1964 Impala SS; Bel Air; Lower Trunk Lid Molding; except Station Wagon
Reproduction of the original lower trunk molding designed for use with 1964 Bel Air, and Impala SS models. Each molding is manufactured in stamped aluminum replicating the original contour and factory design. Will replace the...
1964 Impala SS; Bel Air; Inner Tail Cove Moldings; with Hardware; Pair
Reproduction of the original inner tail cove moldings designed for use with 1964 Impala SS and Bel Air models. Each molding is manufactured in stamped aluminum replicating the original contour and factory design. Will replace...
1962-67 Chevy II, Nova; Upper Trunk Cove Molding Clip Set; Clips, Nuts, Washers
Reproduduction of the original trunk molding clips designed for use with 1962-67 Chevy II and Nova models. Each clip is manufactured to factory specifications for an authentic appearance and fitment. Includes 6 each clips,...
1962 Impala SS Trunk / Cove Panel Molding Kit
Reproduction rear deck panel molding kit for 1962 Impala SS models. These reproductions moldings and panels are manufactured to exact specifications. Kit includes: Upper trunk lid molding (Part # B223900) Outer cove panel...
1962 Impala Trunk / Cove Panel Molding Kit
Reproduction rear deck panel molding kit for 1962 standard Impala models except station wagons. These reproductions moldings and panels are manufactured to exact specifications. Kit includes: Upper trunk lid molding (Part #...
1978-81 Chevrolet Camaro; Standard, Z28; Tail Lamp Filler Applique; LH Drivers Side
Authentic reproduction of the original tail lamp filler panel for 1978-81 standard and Z/28 Camaro models. Each filler is manufactured in injection molded ABS to exact factory specs. The filler applique attaches to the rear...
1979-81 Chevrolet Camaro Berlinetta; Tail Lamp Filler Applique; RH Passenger Side
Authentic reproduction of the original tail lamp filler panel for 1979-81 Berlinetta Camaro models. Each filler is manufactured in injection molded ABS to exact factory specs. The filler applique attaches to the rear tail...
1967-69 Camaro, Firebird; Trunk Weatherstrip Gutter Set; Coupe or Convertible; 3 piece set
Reproduction of the complete 3 piece trunk weatherstrip gutter section manufactured to original factory specifications allowing replacement of the bent, rusted or worn out original gutter. This gutter section installs around...
1963 Impala, Bel Air; Rear Corner Cove Moldings; with Hardware; Pair
Reproduction rear outer corner cove moldings for 1963 Chevrolet Impala, Bel Air, and Biscayne models. Manufactured in quality stamped aluminum to OE specifications. These polished aluminum moldings act as an extension of the...
1979-81 Chevrolet Camaro Berlinetta; Tail Lamp Filler Applique; LH Drivers Side
Authentic reproduction of the original tail lamp filler panel for 1979-81 Berlinetta Camaro models. Each filler is manufactured in injection molded ABS to exact factory specs. The filler applique attaches to the rear tail...
1970-81 Camaro, Firebird; Trunk Weatherstrip Gutters; 2 Piece Set
Reproduction of the original trunk weatherstrip gutters designed for use on 1970-81 Camaro and Firebird models. Manufactured in quality aluminum to OE specifications. This 2 piece trunk gutter is designed to hold the trunk...
1985-92 Chevrolet Camaro; Tail Lamp Applique; with Grid Pattern; LH Driver Side
Authentic reproduction of the original tail lamp filler panel for 1985-92 Z28 Camaro, 1985-90 IROC-Z Camaro, and 1991-92 RS Camaro models. Each filler is manufactured in injection molded die-cast zinc and painted black with...
1978-81 Chevrolet Camaro; Standard / Z28; Tail Lamp Filler Applique; RH Passenger Side
Authentic reproduction of the original tail lamp filler panel for 1978-81 standard and Z/28 Camaro models. Each filler is manufactured in injection molded ABS to exact factory specs. The filler applique attaches to the rear...
1985-92 Chevrolet Camaro; Tail Lamp Applique; with Grid Pattern; RH Passenger Side
Authentic reproduction of the original tail lamp filler panel for 1985-87 Z28 Camaro, 1985-90 IROC-Z Camaro, and 1991-92 RS Camaro models. Each filler is manufactured in injection molded die-cast zinc and painted black with...
1982-90 Chevrolet Camaro; Tail Lamp Applique; with Horizontal Center Accent Stripe; LH
Authentic reproduction of the original tail lamp filler panel for 1982-90 Z28, LT, Sport, and standard Camaro models as listed. Each filler is manufactured in injection molded ABS and painted black with the correct original...