1955-80 GM; Bolt, Pointed Tip; with Hex Washer Head, 5/16-18 X 1-1/4"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1968-92 GM, Chrysler; Door Jamb Switch; 2 Terminal
Replacement door jamb switch for use on various 1968-92 GM models. This 2 terminal switch is manufactured to fit and function as original and specifically designed for the models listed below. Replacing this switch will help...
1967-68 Chevy Camaro; Horn Assemblies; High & Low; with Brackets; Pair; OE Style
Quality reproduction horn assemblies for 1967-68 Camaro Standard and Rally Sport models. These exact reproductions feature the correct "swirl" shaped housings with the correct "Delco-Remy" verbiage in the original font....
1955-56 Chevy Bel Air, 150, 210, Nomad; Horn Assemblies; Hi & Lo Note; with Brackets; Pair
Quality OER® reproduction horns for 1955-56 models. These exact reproductions feature the correct "swirl" shaped housings with the correct "Delco-Remy" markings in the original font. Includes installation hardware and the...
1969-76 GM; Turn Signal Switch; 10-Pin; 3-7/8" Wide Connector
Reproduction turn signal switch for various 1969-76 GM models. Located in the steering column, this switch features the correct color-coded wiring and proper 3-7/8" wide plastic connector for a plug-in installation. 10 wire...
1964-88 GM; Headlamp Switch; 8-Terminals; Various Applications
Reproduction 8-terminal headlamp switch for a wide variety of 1964-96 GM models. This switch mounts on the dash and controls the flow of electrical current to the headlamp system. Each switch comes without the knob or shaft,...
1968-69 Camaro, Caprice, Corvette; Headlamp Switch; with Concealed Headlamps; 8-Pin Design
Reproduction of the original headlight switch assembly designed for use with 1968-69 Camaro Rally Sport, 1968 Caprice, and 1968-77 Corvette models with the concealed (hidden) headlamp option. Once replaced, this switch will...
1957-63 Buick, Chevrolet; Headlamp Switch; Replacement Style; Various Models
Reproduction headlight switch for various 1957-63 Buick and Chevrolet models as listed below. Each switch is designed to replace the original non-working headlamp switch. This reproduction switch will fit exactly as original...
1961-62 Chevy Corvette; Horn Assemblies; High & Low; with Factory Markings; Pair; GM Licensed
OER® reproduction of the original style high and low note horn units originally installed on 1961-62 Corvette models. The swirl horn designs are manufactured from high quality zinc die-cast castings coupled with precision...
1963 Chevy Corvette; Horn Assemblies; with Factory Markings; High & Low Note: Pair; GM Licensed
OER® reproduction of the original style high and low note horn units originally installed on 1963 Corvette models. The swirl horn designs are manufactured from high quality zinc die-cast castings coupled with precision...
1958-64 Chevrolet, GMC; Turn Signal Switch; Various Car and Truck Applications
Reproduction turn signal switch actuator for various 1958-62 Chevrolet & GMC models as listed. This OE quality reproduction turn signal switch looks and performs just like the original. Located in the steering column, this...
1962 Chevrolet Impala, Bel Air, Biscayne; Horn Set; High Note & Low Note; Delco Remy Markings
Quality reproduction of the original horn assembly designed for use with 1962 Chevrolet Impala, Bel Air, and Biscayne models. These exact reproductions feature correct semi-gloss black "swirl" shaped housings, with...
1982-92 Camaro, Firebird; Battery Tray; Passenger Side; EDP Coated
Possibly one of the most overlooked items of your engine compartment is the battery tray. This item mounts the key to your engines ability to run, the battery. This OER® reproduction battery tray is manufactured in...
Chevrolet Small Block / Big Block 1.4 HP High Torque Gear Reduction Mini Starter
Manufactured with die-cast and billet aluminum. This new high performance gear reduction starter weighs only 10 lbs.! Fits small block and big block Chevy V8 models with 153 and 168 tooth flywheels, standard or automatic...
1966-67 Impala, Chevelle, Nova, Corvette; Ignition Switch; Various Models
Reproduction ignition switch for a variety of 1966-67 GM models. Each switch is supplied without the lock cylinder, eliminating the need to re-key your vehicle. simply remove and reinstall your original lock cylinder into the...
1964-81 GM Battery Clamp Mounting Bolt
Reproduction battery tray hold down clamp mount bolt for various 1964-81 GM models. This bolt secures the battery to the battery tray by tightening the hold down clamp.
Replacement windshield wiper switch for 1988-91 R/V truck models with tilt steering and with intermittent pulse wipers. This all new windshield wiper switch will replicate the original fit and funtionality.
1967-68 Camaro, 1967-69 Firebird; Ground Strap Set; Engine, Subframe; 8 Cylinder; 3 Piece Set
Reproduction of the original ground strap designed for use with 1967-69 Camaro and Firebird 8 cylinder applications. Each ground strap is manufactured in woven copper material featuring serrated washer ends. Includes all 3...
1969 Camaro, Malibu,1969-70 Impala; Convertible Top Switch; Tailgate Window Switch; OE Reproduction
Reproduction of the original convertible top switch designed for use with 1969 Camaro, 1969-70 Impala convertible models with power tops, and 1969-70 Impala wagon models for the tailgate window. The switch is manufactured to...
1962-72 Chrome 63 Amp External Voltage Regulator
We now offer this chrome voltage regulator which replaces the original units on 1962-72 models. Manufactured using modern solid state electronics. For use with external regulator models. This regulator is an aftermarket...
1969 Impala, Bel Air, Biscayne, Caprice; OE Style Horn Assemblies; Hi & Low Note; Pair
OER Reproduction of the original horn assembly for use on all 1969 Impala and Full size models. Includes correct bracketry for easier installation. Each horn unit is manufactured to exact specifications and includes the...
1956-87 Chevrolet, Pontiac; Oil Pressure Sending Unit; Various Models
An oil pressure sending unit is an electrical or mechanical sensing device that sends information to the pressure warning lamp. This sending unit is used on a variety of Chevrolet and pointiac models. Will fit many other GM...
1959-63 Impala, Full Size; Battery Hold Down; Top Mount
Reproduction of the original battery tray clamp designed for use with various 1959-63 Impala and Full Size Chevrolet models. Manufactured in stamped steel replicating the original in design and fitment. Replace the worn out...
1964 Impala, Bel Air, Biscayne; Battery Tray; EDP Coated
Quality reproduction of the original battery tray designed for use on various 1964 Chevrolet Impala and Full Size models. Manufactured in quality stamped steel to OE specifications. Features correct mounting points. Possibly...
1968-96 GM; Headlamp Switch; 7-Terminal; Various Applications
Reproduction of the original 7-terminal headlamp switch use for a wide variety of 1969-96 GM models as listed. This switch mounts on the dash and controls the flow of electrical current to the headlamp system. Headlamp knob...
1968-69 Chevrolet/Oldsmobile/Pontiac; Ignition Switch
Reproduction ignition switch for various 1968-69 GM models. Switch does not include lock cylinder and keys. 7 pin style. Replaces OE # 1116694.
Reproduction spring ring positive battery cable designed for 1967-68 Camaro with 396, 1969 with 396, 427, and 1968 Nova with 396 engine. Each cable is reproduced exactly as the original using the same OEM-type spring...
1957-72 GM; Multi-Purpose Relay; Various Models; Horn; Power Windows
Reproduction of the multi-purpose relay designed for use with various 1957-66 GM passenger car, and 1967-72 Chevrolet and GMC truck models. This relay is considered an aftermarket service replacement part that will fit,...
1963-66 GM Turn Signal Switch With Tilt Wheel
Reproduction non-canceling turn signal switch with correct connector and wiring colors to replace original switch on various 1963-66 GM models with a tilt wheel (as listed). Replaces GM part # 1993624. Buick Applications...
1967-72 Chevrolet/GMC Truck; Battery Tray Base
Reproduction battery tray base for Chevrolet & GMC truck, Blazer, Jimmy and Suburban models. Manufactured in quality stamped steel to original GM specifications. Features correct mounting points. Possibly one of the most...
1969 Camaro, Nova; Neutral Safety Switch; with Manual Trans
Reproduction of the original neutral safety switch for use with 1969 Camaro, and Nova models with manual transmission, This switch assembly is manufactured to correct factory specifications. Neutral saftey switch only. The...
Reproduction Delco-Remy horn relay for various 1969-71 GM models. Each horn relay is manufactured to OE specifications and features the "Delco-Remy" insignia stamped on the front of the casing and 12-V stamped on the back of...
Reproduction firewall wiring harness gutter for the firewall and the radiator tie-bar area on 1967-72 Chevrolet & GMC C/K truck models, Suburban, and Blazer/Jimmy. Supplied as a two-piece set, the 61" long wire harness gutter...
1963-66 Chevrolet, GMC; Turn Sign Switch; Without Tilt Wheel; Various Models
Replacement self-canceling turn signal switch (without bearings) featuring the correct connector, 6 wires, with wiring colors to match up with your stock switch. For vehicles without tilt wheel. Replaces GM part # 0898197....
1975-79 Apollo, Nova, Omega, Ventura; Battery Tray; EDP Coated
Reproduction of the original battery tray designed for use on 1975-79 Nova and X-body GM models. Manufactured in quality stamped steel to GM specifications. Features correct mounting points. Possibly one of the most...
1968-74 Chevrolet; Starter Motor Solenoid Heat Shield; with Big Block; Various Models
Reproduction of the factory-style solenoid heat shield designed for use on various 1968-74 big block Chevrolet models. This high-quality shield is manufactured in stamped steel to match the original configuration for an...
1965-68 Chevrolet Small Block; 283-350; Chrome Upper Alternator Bracket; With Short Water Pump
Chrome reproduction bracket for small block Chevrolet engines with original intake manifolds. This bracket is designed for use with original type short water pumps.
1972-76 Buick, Chevrolet, Pontiac, Oldsmobile; Windshield Wiper Switch & Knob; Varius Models
Reproduction of the original style windshield wiper switch designed for use with the various 1972-76 General Motors vehicles listed below. Each wiper switch is manufactured to replicate the original in appearance, fitment,...
Turn Signal Indicator Switch; Universal
This universal switch will mount with all 1947-66 models. This is a universal type replacement that is not considered cosmetically correct. Each turn signal switch will allow your turn signal to function properly as the...
1955-57 Chevrolet, GMC Truck; Battery Tray; EDP Coated
Reproduction of the original battery tray for use with 1955-57 Chevrolet and GMC truck models. Each battery tray is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...
Reproduction headlamp connection wiring harness for 1955-56 Chevrolet Bel Air, 150, 210, Nomad, and 1955-57 Chevrolet pickup and Suburban models. Each harness is manufactured to correct factory specifications, offering an...
1940-55 GM; Headlamp Switch; with Shaft and Knob; 12-Volt; Universal Fit
Universal fit, service replacement headlight switch and knob designed for fitment on a variety of GM models with 12 volt system. A convenient way to update your headlight switch when upgrading and converting your 6 volt...
1964-66 Chevrolet, GMC Pickup, Suburban; Windshield Wiper Switch; 2 Speed
Quality reproduction of the original windshield wiper switch designed for use on 1964-1966 Chevrolet and GMC truck models. Each switch is designed and manufactured to replace the original in fit and appearance. 2-speed...
1969-88 Buick, Chevrolet, Pontiac, Oldsmobile; Turn Signal Switch; 13 Pin; Various Applications
Service replacement turn signal switch for various 1969-88 GM models. Located in the steering column this switch will aid in the prevention of accidents by warning other vehicles that you intend to turn. Fits a wide variety...
1964-66 GM Turn Signal Switch; Without Tilt Wheel
Replacement self-canceling turn signal switch with bearing and brass ring over bearings. Comes with the correct connector and 7-wire design featuring wire colors to match up with the colors on your stock 1964-66 Chevrolet...
1965-68 Chevrolet; Upper Alternator Bracket; Small Block with Short Water Pump
Original style reproduction of the original upper alternator bracket designed for use with 1965-68 Chevrolet small block engines with a short water pump. Each bracket is manufactured in stamped steel to original factory...
Cloth Wiring Harness Tape; 1" x 100 foot
If you want an OEM quality and appearance for your original or reproduction wiring, this specially manufactured black! This adhesive back tape will allow you to re-wrap your existing harness or replace tape which may have...
1967-81 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Ignition Switch; without Lock Cylinder
Replacement ignition switch designed for use with 1967-81 Chevrolet and GMC pickup, Blazer, Jimmy, Suburban, and 1967-1981 G, P van models. Switch does not include lock cylinder and keys. Replaces GM part numbers 1116683,...
1955-56 Chevy Bel Air, 150, 210, Nomad; Battery Hold Down Clamp & Hardware Set
Reproduction of the original style battery hold down for use with 1955-56 Chevrolet Bel Air, 150, 210, and Nomad models. Replace the old or worn-out original battery hold-down to ensure the battery is secure and stays in...
1964-79 Chevrolet; Alternator Pulley; Deep Groove; 3-3/16" Diameter
Reproduction 3-3/16" diameter deep groove alternator pulley for various 1965-1979 Chevrolet models as listed. Each pulley is manufactured from solid steel and precision machined to match the OE Design. Each pulley is Zinc...
1969-2002 AMC, Buick, Chevy, Olds, Pont; Turn Signal Switch; 10-Pin; 4-1/4" Wide Connector
Reproduction turn signal switch for 1969-2002 GM models as listed. Located in the steering column, this switch features the correct color-coded wiring, 10 pins, in a 4-1/4" wide plastic connector for a plug-in installation....
1968-88 GM; Transmission Throttle Control Kickdown Switch; with M40 TH400 Transmission
Reproduction kickdown (downshift) switch or transmission throttle control switch for various 1968-88 Buick, Chevrolet, Pontiac, and Oldsmobile models with an M-40, TH400 transmission as listed. Each switch is manufactured to...
1969-76 Chevy; Alternator Bracket Set; with Small Block; Long Water Pump; Polished Chrome
This convenient aluminum alternator bracket set is designed for small block Chevy engines with long style water pump. Will work to mount the alternator on the RH or passenger side of the vehicle using original holes in the...
1997-04 C5 Corvette; Power Seat Adjuster Switch; For Sport Seats
Reproduction power seat adjuster switch for 1997-2004 C5 Corvette models with sport seats. Produced in injection molded plastic, each assembly will fit either side for a convenient plug-n-play replacement. Not for standard...
1969-86 Chevrolet Big Block; Chrome Upper Alternator Bracket; With Long Water Pump
Chrome reproduction big block upper alternator bracket with factory intake manifolds. This bracket is for use with long water pumps on models equipped with an original big block engine.
1947-53 Chevrolet, GMC Truck; Ignition Switch Assembly
Quality reproduction of the original ignition switch designed for use on 1947-53 Chevrolet and GMC truck models. Each switch is designed and manufactured to replace the original in functionality.
1981-91 Chevrolet/GMC Truck, Blazer, Jimmy, Suburban; Main Battery Tray Assembly; RH
Reproduction main battery tray & support for 1981-86 Chevrolet & GMC truck, 1987-91 R/V models, 1981-91 Blazer, Jimmy & Suburban models. Manufactured to OE factory specifications replicating the original battery tray and...
1955-56 Chevrolet Bel Air, 150, 210, Nomad; Battery Tray; EDP Coated
Reproduction battery tray for 1955-56 Chevrolet Bel Air, 150, 210, and Nomad models. Each battery tray is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance...
1965-68 Chevrolet Big Block; 396-454; Chrome Upper Alternator Bracket; Short Water Pump
Chrome reproduction big block upper alternator bracket for use with factory intake manifolds. This bracket is designed for use with short water pumps on models with an original big block engine.
1969-74 Chevrolet Nova; Headlamp & Windshield Washer Switch Ground Strap; with Bracket
Reproduction of the original style headlamp and windshield washer switch ground strap for use with 1969-74 Chevrolet Nova reproduction headlamp and wiper switch ground strap and bracket. This reproduction is manufactured to...