1961-62 Chevy Impala, Bel Air, Biscayne; Rear Dummy Antenna Assembly; LH Drivers Side
Reproduction antenna assembly designed for use with 1961-62 Chevrolet Impala and full size models. Manufactured to factory specifications each piece is chrome plated, and includes correct mounting hardware to angle the...
1961-62 Chevy Impala, Bel Air, Biscayne; Rear Antenna Assembly; RH Passenger Side
Reproduction of the original rear antenna assembly for use with 1961-62 Chevrolet Impala and full size models. Manufactured to factory specifications each piece is chrome plated, and includes correct mounting hardware to...
1969-81 Chevrolet, GMC, Pontiac; AM/FM Antenna Mast; Non-Telescoping Fixed; Stainless Steel
Reproduction GM AM/FM non-telescopic stainless steel fixed front fender antenna mast for various GM models with an AM/FM radios including 1969 Camaro and Firebird models. Measures 30" non-retractable style round mast....
Universal HIDE-A-WAY Antenna AM/FM; OER Amplified Electronic
If you want great reception without a visible antenna, then the OER® Authorized Hide-a-Way amplified electronic antenna may be just what you need! A major breakthrough in antenna science, the OER® Authorized...
1962-64 Impala; Rear Seat Speaker Grill; 2 Door Hardtop; Convertible; GM Licensed
Quality reproduction of the original chrome rear seat speaker grill designed for use on 1962-64 Impala models. Each grill assembly is manufactured to original specifications offering a beautiful replica of the original...
New reproduction chrome radio faceplates are now available for 1965 Chevrolet models including Impala, Full Size, Chevelle, Malibu, and El Camino. The die-cast face is correct for AM/FM radios and includes the original style...
1965-67 Impala; Rear Seat Speaker Grill; GM Licensed
Quality reproduction of the original chrome center rear seat speaker grille designed for use on 1965-67 Impala models. Each grill assembly is manufactured to original factory specifications offering a beautiful replica of the...
1968-70 Camaro, Corvette, Impala; Radio Volume and Tuning Knobs; AM & AM/FM
OER® reproduction of the original volume and tuning control knobs designed for use with all 1968-70 factory original AM or AM/FM radios. Each knob is a perfect replication of the original. Manufactured in zinc die-cast...
1967-68 Camaro; Rear Mount Antenna Assembly Kit
Reproduction of the original style rear antenna assembly mounted on the rear quarter panel for use with 1967-68 Camaro models. This antenna kit includes all the necessary components required to replace or add a rear quarter...
1967-68 Camaro / Firebird; Dash Radio Bezel; Original Style
OER® reproduction of the original radio face plate bezel for use with 1967-68 Camaro and Firebird models. This die-cast plate is manufactured to original specifications and features the correct black semi gloss finish...
1967-72 Chevy, GMC Pickup, Blazer, Suburban; Fender Mount Antenna Assembly; FM Radio
Reproduction of the original FM antenna designed for 1967-1972 Chevrolet and GMC Pickup and Suburban models This complete antenna assembly is an exact reproduction of the original front fender mounted antenna including the...
1967-68 Camaro, Impala, Firebird Dash Radio Knobs ; Pair
Reproduction of the original volume control knob and tuner control knob radio knobs designed for use on various GM models including Camaro and Impala. Each knobs is manufactured in quality zinc die-cast metal and chrome...
1965-69 Impala, Camaro, Firebird: Convertible Speaker Bolt ; 4 Piece Set
Beautiful reproduction of the original rear speaker anchor bolt and screws designed for use on various 1965-69 GM convertible models. These special screws are used to mount the rear speakers, for use on models with rear...
1964-72 GM; Oval Front Dash Speaker; 4" x 10"; Four Bolt; 8 - 10 Ohms; Each
Reproduction 4" x 10" Oval 8-10 Ohm factory front dash speaker for various 1964-72 GM models. Each speaker is manufactured to original specifications featuring a cosmetically correct rectangular magnet and 4 bolt design for...
Repair the antenna mast and cable for the power antenna with this reproduction repair set. Works on various 1982-93 Buick, Chevrolet, Pontiac, and Oldsmobile models. Comes with the mast and cable. This is an upgraded service...
1969 Nova, Chevelle, El Camino; Front Fender Antenna Kit; AM / FM Radio
Reproduction of the original style non-telescoping fixed mast antenna mounted on the front fender for various 1969 Nova, 1969 Chevelle & El Camino models with AM/FM radio. Each set includes the cable, non-telescoping...
1955-59 Chevrolet, GMC Pickup Truck; Chrome Radio Speaker Cover
Reproduction speaker cover for 1955-59 Chevrolet and GMC truck models. Each speaker grill is manufactured to replicate the original in every detail. Features correct mounting locations as well as a bright polished chrome...
1969 Chevrolet Chevelle, El Camino; Plate; Radio Delete; Black W/Chrome Accent
This optional equipment delete plate was for use on 1969 Chevrolet Chevelle models that were ordered specifically without a radio, usually for racing applications. The plate is injection molded from sturdy black ABS plastic...
1967-68 In Dash Radio Knob Set ; Stereo ; 4 Piece Set ; Various Models
OER® reproduction of the original radio knob set designed for use on various 1967-68 Chevrolet models with a stereo radio. This radio knob set will replace the old or worn out original knobs on factory in-dash radios....
1970-81 Buick, Chevrolet, Pontiac, Oldsmobile; Rear Speaker Grille; With 4 Mounting Studs
Reproduction rear speaker grille for various 1970-81 Buick, Chevrolet, Pontiac, and Oldsmobile models including Camaro, Firebird, Impala, and Regal. Each grill is manufactured in stamped steel to correct factory...
1964-81 Buick, Chevy, Olds, Pontiac; Rear Seat Shelf Speaker Mounting Studs; 4 Piece Set
Reproduction of the original style rear seat shelf speaker mounting studs for use with various 1964-81 GM coupe and hardtop models. These studs have the correct spring clips used to keep tension on the stud when attached to...
Reproduction rear speaker grille for various GM, Ford, and Chrysler models including 1964-80 Buick, Chevrolet, Oldsmobile, Pontiac, Ford, Dodge, Plymouth. Fits Chevelle, Malibu, Impala, Caprice and Nova among other models....
1975-79 Nova, Ventura, Omega, Skylark; Dash AM Radio Knob Set; 4 Piece Set
Reproduction of the original radio knobs designed for use on vehicles originally equipped with AM radios. Set includes volume, tuning, tone and dummy knobs. Manufactured to exact specifications, knobs will fit all Nova and...
1966-79 GM; Rear Speaker Grill; 5 1/2" x 9 1/2"; Various Models; Each
Reproduction rear speaker grill for various 1966-79 Buick, Chevrolet, Pontiac, and Oldsmobile models (except wagons). Each grill is manufactured in quality stamped steel, replicating the original design for an authentic...
1947-53 Chevrolet/GMC Truck; Radio Push Button Set; Tan
Reproduction of the original radio push button knobs for 1947-53 Chevrolet and GMC trucks. Each knob is manufactured to factory dimensions to replace the cracked or weathered original buttons. Includes 5 push buttons.
1967-1974 Various GM Vehicles Including Camaro, Firebird, GTO; Dash Speaker; Mounting Bracket
New reproduction dash speaker mounting bracket for multiple GM vehicles including 1967-69 Chevrolet Camaro, Pontiac Firebird, and Oldsmobile Omega models. See vehicle fitment for all applications.
1966 Chevrolet Chevelle, Malibu, El Camino; Radio Face Bezel
Reproduction radio face bezel for 1966 Chevelle, Malibu, or El Camino models. Each radio face bezel is manufactured in quality injection molded ABS plastic featuring a bright chrome finish. Replaces your damaged, missing, or...
1964-65 Chevy II Nova; Chevelle; Impala; Radio Tone/Fader Knobs; Die-Cast Chrome; Pair
Reproduction tone/fader radio knobs for 1964-65 Chevy II Nova, Chevelle and El Camino models, replacement style for Impala, Bel Air and Biscayne models. Each knob is manufactured in quality die-cast zinc replicating the...
1975-91 Chevrolet, GMC Pickup Truck; Bracket; Rear Speaker; RH Passenger Side
Reproduction rear speaker bracket for the corner of the cab on 1975-86 C/K and 1987-91 R/V Chevrolet and GMC pickup models. These stamped steel brackets are exactly like the stock original brackets found in the corners of the...
1970-72 Chevrolet Chevelle, El Camino, Monte Carlo, S.S. Models;Chrome Inner Mono Radio Knobs; Pair
These are rare inner radio knobs that fit all 1970-72 Chevelle, Monte Carlo and El Camino S.S. models with round gauge style dash. Make your radio function properly with new inner knobs. Fits all AM or Mono AM/FM radios.
1971-75 Various Chevrolet Models; Lens; AM/FM 8 Track Radio
In dash AM/FM radio with 8 track tape player lens each clear acrylic with white writing & blue light reflector. Replace the old faded lens with this new one. This lens has white and blue lettering. Freshen up your radio to...
1971-75 Various Chevrolet Models; Lens; AM 8 Track Radio
In dash AM radio with 8 track tape player lens each clear acrylic with white writing & blue light reflector. Replace the old faded lens with this new one. This lens has white and blue lettering. Freshen up your radio to make...
1971-75 Various Chevrolet Models; AM Radio; Lens; Blue Light
AM radio lens each clear acrylic with white writing & blue light reflector replace the old faded lens with this new one. This lens has white and blue lettering.Freshen up your radio to make it look new again. It fits...
1965-1975 Buick, Chevrolet, Pontiac, Oldsmobile, Radio Antenna Grounding Plate; Bronze; Front
Reproduction of the original radio antenna grounding plate for use with various 1965-75 GM models. Often referred to as a bezel or ring, this special bronze radio grounding plate mounts on the underside of the front fender...
1967-75 GM; Front Fender Mount Antenna Chrome Bezel ; Various Models
Reproduction of the original fender mounted chrome antenna bezel designed for use on various GM models. Manufactured in die-cast zinc to factory dimensions featuring brightly polished triple chrome plating. This chrome bezel...
1969-75 Front Fender Antenna Bezel ; Chrome
Reproduction of the original chrome front fender antenna bezel designed for use on various Camaro and Firebird models from 1969-1975. The bezel is manufactured in zinc die-cast metal to OE speicifactions. Includes a polished...
OER® reproduction chrome antenna bezel nut designed for various 1965-81 GM models. Each bezel nut is manufactured in die-cast zinc and chrome plated, matches the original in appearance and functionality. Antenna hole in...
OER® reproduction of the original chrome antenna bezel nut designed for use with various 1967-72 GM models. Each bezel nut is manufactured in die-cast zinc metal and chrome plated and matches the original in appearance...
Universal-fit, service replacement antenna for classic or late model vehicles with power antenna option. Each motor is mounted directly to the mast assembly and is designed to mount with the universal-fit bracket and 160 inch...
1966-67 Chevy II Nova; Dash Radio Face Bezel
Reproduction radio face bezel for 1966-67 Chevy II and Nova models. Each radio face bezel is manufactured in quality injection molded ABS plastic featuring a bright chrome finish. Can also be used to replace the original...
Reproduction round ball telescopic antenna mast for various GM models from 1962-72 including GM trucks. This reproduction telescoping antenna mast is manufactured to original specifications with stainless steel material for...
1970 Chevrolet; Rear Speaker Grille; with 4 Mounting Studs; Various Models
Reproduction rear speaker grille for various GMmodels. Correct for 1970 Chevelle, Nova, Impala, Caprice and Monte Carlo. This speaker grill features straight sides and four built-in studs like the original. This is a...
1964-66 Chevrolet, GMC Pickup, Suburban; Fender Mount Antenna Assembly; with AM Radio
Reproduction of the original AM antenna designed for 1964-66 Chevrolet and GMC Pickup and Suburban truck models This complete antenna assembly is an exact reproduction of the original front fender mounted antenna including...
Our Premium 5-1/2" round coaxial stereo speakers provide the ultimate audio quality in your classic car or truck. Speakers have 100 watts peak power capacity and a frequency response of 90-13KHZ. Ultra thin design makes this...
Premium Kick Panel Speakers; 4"; 70 Watts Peak Power; Pair
Our Premium 4" round stereo speakers provide the ultimate audio quality in your classic car or truck. Speakers have 70 watts peak power capacity and a frequency response of 100-13 KHZ. 2" deep design makes this speaker...
1969 Nova, Camaro, Firebird, Front Fender Antenna Kit; AM/FM Non-Telescoping Fixed Mast Radio;
Reproduction of the original style non-telescoping fixed mast antenna mounted on the front fender for various 1969 Chevy II Nova, and 1969 Camaro and Firebird models with AM/FM radio. Each set includes the cable,...
1967-68 Camaro, Firebird; Front Fender Antenna Kit; AM/FM Radio
Reproduction of the original style RGH front fender antenna for use with 1967-68 Camaro and Firebird models. This non-telescoping fixed mast antenna is mounted on the RH passenger front fender for vehicles that came with an...
1962-77 GM Car, Truck; Front Dash Speaker; 4" x 10"; 8 -10 Ohms; Authentic Reproduction
Reproduction 4" x 10" rectangular factory style front dash speaker for various 1962-77 GM models. The GM factory began using this style of speaker in 1962. By 1968 this speaker design was commonly found in almost all GM...
1958-83 GM; Front In Dash / Rear Seat Shelf Speaker; 6" x 9"; 8-10 Ohms; Each
Reproduction 6" x 9" factory style 8-10 Ohm speaker for various 1958-83 GM models. This is an exact replica of the speaker installed by the GM factory in the dash and/or beneath the rear seat shelf, manufactured to original...
1967 Chevrolet Impala, Full Size; Radio Delete Plate; Black Pebble Grain With Chrome Edge
This is the radio delete plate wth the black pebble finish and chrome on the edge for 1967 Chevrolet Impala, Caprice and Bel Air. It can also be used on 1968 models. Sold individually.
1969-70 Chevrolet Bel Air, Caprice, Impala; Radio Delete Plate Kit
Replacement radio delete plate for 1969-70 Chevrolet Bel Air, Caprice and Impala models. Injection molded like the OEM, black with chrome accents. Replaces GM part# 3948563.
1968-70 Inner Radio Control Knobs ; Stereo ; Pair
OER® reproduction of the original tone and fader control knobs designed for use on various 1968-70 GM models. Each knob is manufactured in quality injection molded ABS plastic with a bright chrome finish. Note: For use...
1973-89 Buick, Cadillac, Chevy, Pontiac, Oldsmobile; Rear Speaker Enclosure Retainer; Each
Reproduction of the original enclosed speaker retainer for use with various 1973-89 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models. This is the spring steel retainer that attaches the rear speaker enclosure on...
1971-78 Chevrolet, Pontiac, Oldsmobile; Radio Control Knobs; Volume and Tuning; Pair
Reproduction volume and tuning control knobs for 1971-78 General Motors factory radios. Each knob features the correct radio tuning symbol and music note markings as shown. Manufactured in injection molded ABS with correct...
1947-53 GMC Truck; Upper Dash Trim Molding
Reproduction upper dash trim molding for 1947-53 GMC pickup truck models. Manufactured from polished stainless steel with the wording "GENERAL MOTORS TRUCK". This molding attaches to the upper portion of the center dash...
Reproduction of the original 4" x 6" front kick panel speaker and in-dash speaker for various 1965-93 GM models with a factory 4-speaker stereo system that requires a 8-10 OHM speaker. Each speaker is manufactured to the...
1968-70 Inner Radio Control Knobs ; Mono ; Pair
OER® reproduction of the original tone and fader control knobs designed for use on various 1968-70 GM models. Each knob is manufactured in quality injection molded ABS plastic with a bright chrome finish. Note: For use...
Aftermarket replacement antenna features a telescopic mast that can be manually retracted in order to prevent it from being broken off or bent by low hanging branches, or bushes. This antenna mast is designed for mounting on...
Radio Installation Nuts; 7/16"-28 thread x 1/8" thick; Pair
Correct mounting nuts used to hold the radio in place on most GM applications. Fits radios that use 7/16"-28 thread x 1/8" thick flat style hex nuts.
1967-68 In Dash Radio Knob Set ; Mono ; 4 Piece Set ; Various Models
OER® reproduction of the original radio knob set designed for use on various 1967-68 Chevrolet models with a mono radio. This radio knob set will replace the old or worn out original knobs on factory in-dash radios. Knobs...