OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...
1965-72 GM; Wiring Harness Firewall Retainer Gutter; 13" Long; OER
Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...
Reproduction of the original door frame weatherstrip that installs on the outer frame of the door on 1965-66 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile Full Size 2 door hardtop or convertible models. Manufactured in...
1963-64 Impala, Electra, Wildcat; Door Frame Weatherstrip Seal; 2-Door Hardtop; Convertible, Pair
Quality reproduction of the original door frame weatherstrip that installs on the outer frame of the door on 1963-64 Impala and GM full size 2 door hardtop and convertible models. Manufactured in the correct configuration...
Exact reproduction of the original door frame weatherstrip that installs on the outer frame of the door on 1961-62 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile full size passenger car models. Manufactured in the...
Quality reproduction of the original roof rail weatherstripping designed for 1959-60 Impala and Full size GM models. This quality reproduction seals the area between the roof rail and the door glass eliminating water and...
1955-59 Truck, 1955 Car 4-Hole 1-5/8" OD Wire Harness Grommet (Large)
Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...
Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each
Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.
1971-78 Cadillac; Hood to Fender Rubber Bumper; Each
Replace your original hood bumper with correctly configured bumpers.
1958-84 GM; Outer Rear Hood Rubber Stoppers; Pair; Various Models
Reproduction outer rear hood bumpers for various GM models. Each bumper is manufactured to quality EPDM rubber compound and matches the original in dimensions allowing proper fitment. Sold in pairs. Use as required Buick...
1957-70 Buick, Cadillac, Chevy, Pontiac, Oldmobile; Trunk Weatherstrip; Various Full Size Models
Reproduction of the original trunk weatherstrip manufactured in the correct configuration. Prevent water damage in your trunk area by replacing the worn and damaged weatherstrip with this authentic reproduction. The soft...
Nylon Fastener; 13/64" Dia. Stem; 13/32" Stem Length; For Door/Header Weatherstrip; Natural
This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...
Correct reproduction of the original roof rail weatherstrips designed for use on 1965-66 Impala and Full Size GM 2 door hardtop models. Eliminate water or other elements from entering the passenger area by replacing these...
1967-68 Impala / Full Size Quarter Window Weatherstrip, Convertible, Pair
Quality reproduction of the original weatherstripping designed for use on 1967-1968 Impala convertible models. Each strip is manufactured with OEM type rubber material for authenticity and fit. Installs vertically on the side...
1987-04 GM, 1993-97 Camaro, Firebird; Hood Adjuster Bumper Cap; Each
Reproduction of the front hood adjuster bumper cap for 1993-97 Camaro, Firebird, and various other 1987-2004 GM models. Manufactured to correct factory dimensions in quality EPDM rubber for an authentic replacement. Sold...
1982-2012 GM Fuel Door; Door Pull Handle; Hood Stop; Sunroof. Rubber Bumper; Each; Various Models
Reproduction of the original style rubber bumper that fits a wide variety of 1982-2012 GM models and applications. Can be used for the fuel door, front and rear door pull handle, hood stop bumper, and sunroof control arm....
Staple For Inner Fender Splash Apron, 1/2 inch
Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
1980-2016 GM; Outer Hood Adjust Rubber Bumper; Each; Various Models
Reproduction of the original molded rubber hood adjustment bumper located on the outer hood for various 1980-2002 GM models. This reproduction molded rubber bumper is manufactured to original specifications for an authentic...
1976-92 Buick, Chevrolet, Oldsmobile, Pontiac; Trunk & Hatchback Weatherstrip Seal; 18 Foot Length
Reproduction weatherstripping designed to replace the cracked or damaged original for various GM models. This weatherstripping is manufactured exactly like the original unlike other weatherstrips on the current market....
Correct reproduction of the original U-shape rubber molded weatherstrip seal originally installed on 1969-70 Buick, Chevy, Pontiac, and Oldsmobile Full Size hardtop & convertible passenger car models. This seal attaches to...
Sealstrip Glass Setting Tape; 10 Foot Roll; 1/32" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1955-1981 GM; Firewall Pad Fastener; Each
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each
Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...
Door, Vent, Quarter Glass; Sealstrip Glass Setting Tape;10 Foot Roll; 1/16" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
Reproduction door frame weatherstrip set for Chevrolet Impala and other GM Full Size 2-door hardtop and convertible models. This reproduction is designed to replace the original exactly featuring the correct molded ends and...
Correct reproduction of the original roof rail weatherstrips designed for use on 1967-68 Impala and Full Size GM 2 door hardtop models. Eliminate water or other elements from entering the passenger area by replacing these...
Sealstrip Glass Setting Tape ; 10 Foot Roll ; 3/64" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1967-69 Camaro, Firebird; Plastic Clip Set; Radiator Support To Hood Seal; 9 Piece Set
Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...
1938-91 GM; Consol & Glove Box Rubber Stoppers; Fits 1/4" Hole; Pair
Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...
1954-1981 GM; Hood Adjustor Rubber Bumper & Stud; Various GM Cars & Trucks
Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...
1941-76 Mohair Window Channel Liner ; 2-5/8" wide x 8" long
When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...
1955-58 Buick, Cadillac, Chevy, Pontiac, Olds; Windshield Pillar Post Weatherstrip; Pair
Reproduction of the original pillar post weatherstripping designed for use on various 1955-58 Buick, Cadillac, Chevy, Pontiac, and Oldsmobile models including 1955-57 Bel Air and full size Chevrolets. Replacing the windshield...
Quality reproduction of the original weatherstripping designed for use on 1965-66 Impala, Caprice, Electra, Wildcat, Calais, DeVille, Bonneville, Catalina 4 door hardtop models. Each weatherstrip is manufactured with OEM type...
1977-2005 Buick, Chevy, Olds, Pontiac; Compartment Lid Rubber Bumper; Front or Rear; Each
Reproduction of the original rear compartment lid rubber stopper needed to prevent the rear compartment lid from slamming against the body. Each rubber bumper is manufactured in quality EPDM rubber that replicates the...
1982-98 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac; Door Jamb Switch Seal
Reproduction door jamb switch seal for the door jamb switch on a wide variety of GM models. Manufactured in rubber like the original, this accordian style seal prevent the elements from entering into the door jamb switch...
Reproduction of the original rubber stopper designed for use on the upper door section of the various GM models listed below. Each rubber stopper is manufactured to replicate the original in fitment and appearance. This...
1958-64 Impala, Bel Air; Quarter Window Vertical Weatherstrip; 2 Door; Hardtop, Convertible
Reproduction of the original quarter window vertical weatherstripping designed for 1958-64 Impala, Bel Air, Electra, Le Sabre, El Dorado, and other Full Size GM models as listed. This high quality reproduction is manufactured...
1941-76 Mohair Window Channel Liner ; 1-5/8" Wide x 8" Long x 1/16" Thick
When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...