1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; RH Passenger Side; Various Models
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; LH Drivers Side; Various Models
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
1970-81 Rear Spring Shackle Bushing ; Camaro, Firebird, Nova, X-Body
Replace your cracked or worn out original rear spring shackle bushings and bring your rear suspension back to original factory ride specifications. Each bushing is designed and manufactured to replicate the original in...
1967-69 Camaro, Firebird, 1968-79 Nova; Mono Rear Leaf Springs; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models, and 1968-79 Chevy II, Nova, and X-body models. Each leaf spring is manufactured to factory specifications and...
5 Leaf Rear Leaf Springs (Spring Rate 143 Lbs) - Replacement Style
Replace the sagging leaf springs on your classic GM vehicle with this quality set produced by OER! These replacement rear leaf springs are designed to replace the original multi-leaf spring set while featuring a precise...
Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1970-81 Camaro, Firebird, 1970-79 Chevy II, Nova and X-Body; Rear Spring Shackle Bushing Set
Reproduction rear leaf spring shackle for 1970-79 Chevy II/Nova, GM X-Body, and 1970-81 Camaro, Firebird models. Each shackle eplaces the old or worn out original hardware and bushings with a quality reproduction. Includes...
1971-2005 GM; Lower Control Arm Bushing; Passenger Car and Truck; Varius Models; Each
Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or...
1970-72 Buick Skylark, GS 455, GS; Chassis & Suspension; Hardware Bolt Kit; OEM
This is a 129 piece kit it includes all the bolts needed to attach your suspension & steering to the frame for 1970-72 Buick Skylark, GS and GS 455 models. Includes brake line and fuel line "clamp bolts" as well as...
Enhance the handling performance of your 1964-72 GM A-Body model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension geometry for enhanced...
1968-69 Camaro, Firebird, 1968-79 Nova, X Body; Lower Rear Shock Mount Bolt; Each
Reproduction of the lower rear shock mounting bolt for 1968-69 Camaro, Firebird, and 1968-79 Nova, 1971-77 Ventura, 1973-80 Omega, 1973-75 Apollo, 1975-80 Skylark models with multi-leaf springs. This essential bolt was...
Front sway bar for various 1964-81 Buick, Chevrolet, Pontiac, and Oldsmobile models with a 1-1/8" diameter bar. This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...
1970-81 Camaro, Firebird; Front Sway Bar; with WS6 Suspension; 1-1/4"
Reproduction of the original factory style 1-1/4" front sway bar designed for use with 1970-81 Camaro and Firebird models with WS6 suspension. This silver zinc plated sway bar is compatible with factory mounting brackets....
Reproduction disc brake spindle set for various 1967-69 Camaro, Firebird, 1968-74 Nova, X-Body, and 1964-72 Chevelle, A-Body models. Each brake spindle set is manufactured in forged steel replicating the original in design,...
1970-81 Camaro, Firebird; Front Sway Bar; 1-1/16"; High Performance; LS5, LS6
Reproduction of the original factory style 1-1/16" front sway bar designed for use with 1970-81 Camaro and Firebird models including various 1964-72 Chevrolet, Buick, Olds, and Pontiac models with high performance suspension...
1968-72 GM A-Body; Upper Rear Trailing Arm Set
Reproduction rear upper trailing arms for 1968-72 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1968-72 Chevelle, Skylark, Cutlass, GTO; Control Arm; Rear Upper W/Polyurethane Bushings
Reproduction of the original rear upper control arm for use with various 1964-67 GM models including Chevelle, GTO, Cutlass. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design,...
1964-67 GM A-Body; Rear Trailing Arm Set; Upper
Reproduction rear upper trailing arms for 1964-67 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...