Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1969-87 Chevrolet, Pontiac; Door Hinge Repair Set; Except with 15mm OD Bushings
Reproduction of the original door hinge components for use on various GM models. Repair the broken door hinges with this comprehensive repair set. Each repair kit includes 4 properly hardened shoulder pivot pins and 8...
1981-87 Buick Regal, T-Type, GNX, Grand National; Chrome Front Bumper
Reproduction of the original front bumper designed for use on 1981-87 Buick Regal. T Type and Grand National models equipped with a chrome bumper. Each bumper is manufactured to factory specifications featuring all factory...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
Reproduction inner T-Top repair panel set for 1978-88 Buick, Chevrolet, Oldsmobile, and Pontiac G-Body models. Manufactured in stainless steel for strength and long term durability, each component is stamped to factory...
1984-87 Buick Regal Grand National; Trunk Mat Kit with Boards; Cutpile; Medium Doeskin
1984-1987 Buick Regal Grand National complete trunk mat kit. This kit is in the color in medium doeskin and comes with boards in a cutpile. Make the trunk look like new with this great trunk mat kit. {fitment}
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1981-87 Regal, T-Type, Grand National; Rear Spoiler; 3 Piece; Made in the USA
Reproduction bolt-on 3 piece rear spoiler for 1981-87 Regal, T-Type, GNX and Grand National models. Each spoiler section is manufactured in quality fiberglass material for correct fitment and long lasting dependability. Each...
1973-77 Regal; Cutlass; Monte Carlo; El Camino; LeMans; Body Mount Bushing Set; 28 piece
Reproduction 28 piece body mount bushing set for various 1973-77 GM models. Manufactured to factory specifications for proper fitment and function. These kits are made out of compression molded S.B.R. with steel sleeve...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
Reproduction windshield glass for various 1973-77 GM A-Body 4-door sedan and station wagon models. This windshield is manufactured with tempered laminate safety glass that meets the standard for protection against road...
1978-87 Buick Regal; G-Body; T-Top Center Rail; Stainless Steel; Black
Reproduction of the original style T-Top Center Rail. Manufactured out of stainless steel and painted black to replicate the original design and fitment. Designed for 1978-1987 Buick Regal, Monte Carlo and Oldsmobie 442 with...
OER reproduction of the front windshield glass for use with 1973-77 GM A-Body 2-door coupe models without the built-in antenna. This windshield is manufactured with tempered laminate safety glass that meets the standard for...
1978-85 Regal, Monte Carlo, Cutlass; Back Window Glass; 2-Door Coupe; with Defrost; Tinted
Reproduction of the original back window glass for various GM G-Body 2 door coupe models equipped with rear window defroster. Replace your missing, scratched or broken original glass with this new DOT (department of...
Reproduction of the original front windshield glass for use with 1978-88 Buick, Chevy, Pontiac, Oldsmobile G-Body models as listed. This windshield is manufactured with tempered laminate safety glass that meets the standard...
1981-87 Regal, Grand National; Front Bumper Impact Strip; without Accent Paint; Black;
Reproduction front bumper impact strip for 1981-87 Buick Regal models. Manufactured to factory specifications for proper fitment and appearance. The impact strip is inserted into the front bumper. NOTE: This bumper impact...
1981-87 Buick Regal; Front Bumper Reinforcement Bar; 2-Door Coupe; EDP Coated
Reproduction front bumper reinforcement bar for 1981-87 Buick Regal 2-door coupe models. Each reinforcement bar is manufactured to original factory specifications replicating the OE design featuring correct mounting...
1981-87 Buick Regal; Rear Bumper Reinforcement Bar; 2-Door Coupe; EDP Coating
Reproduction rear bumper reinforcement bar for 1981-87 Buick Regal 2-door coupe models. Each reinforcement bar is manufactured to original factory specifications replicating the OE design featuring correct mounting locations....
1978-87 Buick Regal; T Top Sun Visor Trim Panels; Tan; Pair
Reproduction of the original style t-top sun visor trim panels designed for use with various 1978-87 Buick Regal and GM G-Body models. Each visor trim panel is manufactured to factory specifications featuring the correctly...
Brand New Reproduction wiper motor built using the industry's most advanced engineering technology. Core shortages and low availability have made our brand new replacement wiper motors the high quality, low cost alternative...
Upgrade your classic with this brand new reproduction wiper motor, engineered using the latest advancements in automotive technology. Designed as a high-quality, cost-effective alternative to hard-to-find NOS, used, or...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1978-85 Buick, Chevrolet Pontiac, Oldsmobile; T Top Handle Set; Chrome; RH & LH; Pair
OER reproduction of the original T-Top handles designed for use on various 1978-85 GM vehicles. Each handle is manufactured in quality die-cast zinc and finished in bright polished chrome for an authentic factory appearance....
New power window motor for various GM passenger car and truck models. Manufactured to factory specifications for an original fit and function. This original style power window motor was used in wide variety of GM models....
1984-87 Buick, Chevrolet, GMC, Oldsmobile, Pontiac; Windshield Wiper Motor; 2 Terminal; Brand New
Brand New Reproduction wiper motor built using the industry's most advanced engineering technology. Core shortages and low availability have made our brand new replacement wiper motors the high quality, low cost alternative...
1981-87 Buick Regal; Front Bumper Impact Shocks; Aluminum; Pair
Reproduction of the original style aluminum front bumper support shock/bracket for use with 1981-87 Buick Regal models. These bumper supports weigh close to a pound and combine for a total weight savings of 7.4 pounds over...
Reproduction power window lift motor for various 1979-2005 GM models. Return your power windows to good working order by replacing your missing or nonfunctional original motor with this brand new reproduction motor. {specs}...
Reproduction of the original GM frame body mount cushion for various 197-96 GM models. Each body mount is produced using correct compression molded S.B.R. that replicates the original in quality and fitment. 1977-79 Nova/GM...
Reproduction exterior door mirror for various 1978-81 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. Each mirror is precision-manufactured in high-quality die-cast zinc and finished in bright chrome plating to...
Reproduction exterior door mirror for various 1978-81 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. Each mirror is precision-manufactured in high-quality die-cast zinc and finished in bright chrome plating to...
1978-87 Buick Regal; G-Body; T-Top Center Ridge; Stainless Steel; Black
Reproduction of the original style T-Top Center Ridge. Manufactured out of stainless steel and painted black to replicate the original design and fitment. Designed for 1978-1987 Buick Regal, Monte Carlo and Oldsmobie 442 with...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1973-77 Chevelle, Malibu, El Camino, Laguna; Monte Carlo, Regal; Upper Door Hinge; LH Driver Side
Reproduction upper front door hinge designed for 1973-1977 GM A-Body models, including Chevrolet Chevelle, Malibu, El Camino, Monte Carlo, and Laguna. This high-quality reproduction is built to factory specifications to...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
OER reproduction retaining pin used by GM for various applications. Manufactured from injection molded plastic as original, this retaining pin measures M4.2 x 1.41 x 15 and fits a 4.75mm diameter hole. Sold individually. Use...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
1976-88 Buick, Chevy, Pontiac Olds; Exterior Door Handle; Black; LH Driver Side; Various Models
Reproduction of the original style exterior door handle designed for use with various 1976-88 Buick, Chevrolet, Pontiac, and Oldsmobile models. This door handle is produced in die-cast metal featuring a glossy black finish...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1978-87 Regal, G-Body; Upper Door Hinge; LH Driver Side; EDP Coated
Reproduction of the original upper door hinge designed for use with various 1978-87 GM G-Body models. Each hinge is precision manufactured in high-quality stamped steel and built to OE specifications for a perfect fit and...
Reproduction lower front door hinge designed for use with 1973-1977 Chevrolet Chevelle, Malibu, El Camino, Monte Carlo, Laguna, and other GM A-Body models. Each hinge is precision manufactured to factory specifications for...
1982-92 Camaro, Firebird, Regal; Fisher T Top Handles; Die-Cast; Black; Pair
OER reproduction of the original Fisher T-Top handles, also referred to as roof glass lift-off handles. Each handle is manufactured in quality die-cast zinc with a durable black finish for an authentic appearance. These...
1978-87 Regal, G-Body; Lower Door Hinge; RH or LH; Each; EDP Coating
Reproduction of the original lower door hinge designed for use with various 1978-87 Buick Regal and GM G-Body models. Each hinge is precision manufactured from high-quality stamped steel and built to OE specifications for...
1978-87 Regal, G-Body; Upper Door Hinge; RH Passenger Side; EDP Coated
Reproduction of the original upper door hinge designed for use with various 1978-87 GM G-Body models. Each hinge is manufactured from high-quality stamped steel and built to OE specifications to ensure proper fit, function,...
Replacement T-Top inner plastic trim cover/molding non locking style for various 1978-88 GM Applications, including Buick Regal, Chevrolet Monte Carlo, Pontiac Grand Prix. Each panel is manufactured in injection-molded ABS...
1977-2005 Buick, Chevy, Pontiac, Oldsmobile;;Hood Latch Assembly; Various Models
Reproduction hood latch assembly for various 1977-2005 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed below. Each latch is designed as a direct replacement for the worn or inoperative original....
Correct reproduction washer pump for various 1973-1984 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models. Each pump is engineered to match original equipment washer pump in functionality, fitment, and cosmetic...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
1978-88 Regal, Monte Carlo, Cutlass, Grand Prix; Windshield Wiper Arm; Silver; RH Passenger Side
Reproduction windshield wiper arm for various 1978-88 GM A-Body and G-Body models as listed. Each wiper arm is manufactured to original factory specifications for proper fit and functionality, and features an authentic...
1981-87 Buick Regal; Front Bumper Guard; Chrome; 2 Door; LH Drivers Side; OER
Reproduction of the original front bumper guard designed for use on 1981-87 Regal, Grand National, T-Type, and GNX models equipped with a chrome front bumper. Each bumper guard is manufactured to factory specifications...