Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1971 Buick Stage 1 GS 350, GS 455; Trunk Emblem; BY BUICK Nameplate
Reproduction "BY BUICK" nameplate emblem for the trunk lid on 1971 Buick GS 350 and GS 455 Stage 1 models. Each die-cast emblem is designed and manufactured to replicate the original for an authentic appearance and fit....
1965-70 Pontiac GTO, LeMans, Tempest; Rear Console Box; Lid; Door; Emblem
Authentic reproduction console door emblem. Features the Buick tri-shield logo and mounts on the console door pad. It fits 1965-70 Buick Skylark models. The backside features correctly spaced mounting pins for a hassle-free...
Reproduction of the original "Buick" trunk lid emblem for various 1978-87 Buick models as listed. Each emblem is manufactured in quality injection molded ABS featuring correct chrome block lettering that matches the OE...
1970 Buick Skylark, GS 455, GS; Radiator Tag; Code SJ (IA, CF, 3); Air Conditioning
Reproduction of the original radiator tag for 1970 Buick Skylark, GS 455 and GS models. These are factory style metal tags that GM put on all radiators. It gives you the codes that GM put on their radiators to identify what...
1964-72 Buick, Skylark, Gran Sport, GS; Console Emblem; 4-Speed Shift Pattern
Reproduction 4-speed shift pattern emblem for the floor-mounted center console in various 1964-72 Buick A-Body models with manual transmission and console. Each console emblem has the R, 1, 2, 3, 4 shift pattern with the...
1970-72 Buick Skylark; Fender Emblem "BUICK MOTOR DIVISION"
Replacement front fender emblem "Buick Motor Division" for use on 1970-72 Buick Skylark, GS and GS 455 models. Red background is inset with chrome lettering and border. It has two mounting pins and one guide pin on the...
1970 Buick Skylark, GS; Emblem; Door Panel GS
Replacement inside door trim panel GS emblem for 1970 Buick Skylark GS and GS models. This emblem attaches to the door trim panel. It has bright red GS with a chrome border and a black dividing line. Sold individually.
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1967-1974 "GM Mark Of Excellence" Door Deflector Decal; Embossed; Blue; Each
Reproduction of the original "GM Mark of Excellence" door reflector decal original installed on many various 1967-74 General Motors vehicles. It is used as a reflector to allow upcoming traffic to see the car door when...
1972 Buick Skylark, GS; Rear Bumper Emblem; Buick Nameplate
Reproduction "BUICK" nameplate emblem for the rear bumper on 1972 Buick A-Body models. Each die-cast emblem is designed and manufactured to replicate the original for an authentic appearance and fit. Chrome plated emblem with...
1979-93 Buick Riviera; Hood Ornament; With -R- Insignia
Reproduction hood ornament assembly for the front end on 1979-93 Buick Riviera models. This ornament mounts to the front end of the vehicle. Each die-cast ornament assembly features chrome plated Oval head with -R- insignia...
1970-72 Buick GS, Front Fender Emblem; Stage 2
Reproduction fender emblem nameplate with "STAGE 2" insignia for 1970-72 Buick GS models. If you are lucky enough to have one of the extremely rare 1970 Stage 2 models, this is the emblem for the front fender to designate the...
1972 Buick GS; Grill Emblem; GS by BUICK Nameplate
Reproduction GS by BUICK nameplate grill emblem script. This emblem fits on left side front grill. Zinc die-cast emblem features chrome plated GS letters, backfilled in red, with black background accenting and BY BUICK lower...
1970-72 Buick Skylark Custom; Trunk/Decklid Emblem; "GS"
New reproduction fender emblem for 1970-72 Buick GS and GS 455 models. This emblem is the "GS " that mounts on the trunk/decklid. Red inlayed red lettering and a chrome border.
1964-89 Buick, Chevy, GMC, Pontiac, Oldsmobile; Rear Axle Identification Tag; Various Models
This reproduction limited slip rear axle ID tag is designed to ensure the correct gear oil is used when servicing the rear end. Commonly found on 1964-1989 GM models, this tag identifies the proper lubrication requirement for...
1970-74 Buick Skylark, Riviera, LeSabre; Fender Emblem; 455
Replacement die-cast fender emblem for use on 1970-74 Buick Skylark, Riviera, LeSabre and GS models. This is the 455 fender mounted emblem. Sold individually.
1958-89 Various GM Vehicles Camaro, Firebird, Regal, 442; Differential Limited Slip Lube; Tag
Positive traction differential metal tag that states "USE LIMITED SLIP DIFFERENTIAL LUBE ONLY" for multiple 1967-89 GM vehicles which includes Firebird, Camaro, Regal, 442 models. Give the differential the original look with...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Universal Barrel Nut Kit, fits 1/8" Emblem Stud, fits 11/64" Hole; 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....
1978-90 Door Sill Plate Emblem; Body By Fisher; Each
Correct reproduction "B ody by Fisher" door opening sill plate emblem for various 1978-90 Buick, Chevrolet, Pontiac, and Oldsmobile models. Each emblem is correctly stamped in aluminum material to exact specifications...
Push On Flat Nut, Fits 3/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits5/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Thread Cutting Nut, 1/8" Stud Size, 1/4" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut, Fits 5/32" Stud, Fits 7/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Push On Flat Nut, Fits 1/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 1/8" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 5/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 3/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; "Body by Fisher" Door Sill Plate Emblem; Embossed; Each
Reproduction "Body By Fisher" door sill plate emblem for GM vehicles. This emblem is manufactured to correct specifications and includes the correct coach colors and the word "Fisher" embossed on the emblem with a peel and...
Thread Cutting Pal Nut Set; with Sealer, 3/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut, 5/32" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 3/16" Stud Size, Hex Washer Head, Zinc Plated
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 1/4" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...
Thread Cutting Pal Nut Set; with Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Round Push On Flat Nut, Fits 5/32" Stud Size, Zinc Plated, 10 Piece Set
Replacement push on round flat nuts used on various vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Thread Cutting Pal Nut, 5/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...