Reproduction LH rear frame rail section for 1978-88 Monte Carlo, Cutlass, Regal, and Grand Prix, and 1978-83 Malibu 2-door models. Each frame rail section is manufactured from quality stamped steel to factory specifications...
Reproduction floor pan half for various 1978-88 A-Body and G-Body 2 door models. Manufactured to factory specifications, featuring original style contours and stiffening ribs for added support matching the factory design....
Reproduction T-top header panel with weatherstrip retainer channels designed for 1978-87 Buick Regal, Type T, Limited, Grand National, and other GM G-Body models equipped with factory T-tops. Each panel is manufactured from...
Replace your rusted or damaged cowl side panel with this quality reproduction. This panel installs behind the fender at the side of the firewall. Made in USA. Features and Benefits: Authentic reproduction cowl side panel...
Reproduction front floor pan repair panel for 1978-87 Regal and various other 1978-88 GM A-Body and G-Body models. Manufactured for the purpose of repairing smaller sections of the floor pan without having to replace the...
Reproduction rear floor pan repair panel for 1978-87 Regal and G-Body models. Manufactured for the purpose of repairing smaller sections of the floor pan without having to replace the complete floor pan assembly. Each panel...
1978-88 Regal, GM G-Body; Lower A Pillar; RH Passenger Side
Reproduction lower A pillar repair panel for various 1978-88 G-Body models. Manufactured to factory specifications for proper fitment and appearance. Comes EDP coated for rust prevention. Replaces the often rusted out lower...
1978-88 GM A-Body, G-Body; Lower B-Pillar Panel; RH Passenger Side
Reproduction lower B-Pillar panel for 1978-88 GM A-Body, and G-Body models including Buick Regal. Replace the damaged or rusted panel on your classic GM vehicle with this quality reproduction panel. Each panel is manufactured...
1978-88 Buick Regal; Inner Bucket and 45/55 Split Bench Seat Mounts; 4 Piece Set
Reproduction of the original inner 45/55 bench and bucket seat mounts designed for use with 1978-88 Buick Regal and GM G-Body models. The seat mounts are manufactured to original factory specifications. Will work when...
1967-79 Camaro, Firebird, 69-79 Nova, GM X Body; Outer Cowl Side Panel; LH; Drivers Side; EDP Coated
Reproduction of the original outer cowl panel designed for use with various 1967-79 GM models including 1967-69 Camaro, Firebird, 1968-79 Nova, and GM X-body models. Each panel is manufactured in stamped steel to original...
1974-92 Buick, Chevrolet, Pontiac, Oldsmobile; Front Floor Pan Plug; 3-3/4" x 3-1/2"; Various Models
Reproduction original style floor pan plug designed for use on various 1974-92 GM models. Each floor pan plug is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...
Ford, Lincoln, Mercury Style; Floor Pan Plug; 2-7/8" x 4-5/8"
Galvanized and die stamped steel like the original. Can be used as a universal fit plug on practically any vehicle. The 2-7/8" x 4-5/8" floor pan plugs often need replaced from years of rust damage. Sold individually. Screws...
1974-92 GM; Floor & Trunk Pan Floor Plug; 5" x 4"; Stamped Steel; Various Models
Reproduction original style floor/trunk pan plug designed for various 1974-92 GM models. Each floor plug is manufactured in stamped steel to factory specifications featuring correct contours for an authentic appearance and...
Ford, Lincoln, Mercury; FLOOR PAN METAL PLUG; Pair; 3-3/4" x 2-3/8"
This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Sold individually.
1978-88 Regal, Monte Carlo, Cutlass, Grand Prix, G Body; Complete Floor Pan; 2 Door; EDP Coated
Reproduction of the original complete floor pan designed for use with 1978-87 Buick Regal, Chevrolet, Oldsmobile, and Pontiac G-body 2 door models. Each panel is manufactured in quality stamped steel to original factory...
Reproduction RH rear frame rail section for 1978-88 Monte Carlo, Cutlass, Regal, and Grand Prix, and 1978-83 Malibu 2-door models. Each frame rail section is manufactured from quality stamped steel to factory specifications...
Reproduction of the original windshield A-pillar designed for use with 1978-87 GM G-Body models with the t-top roof option. Each A-pillar is manufactured to correct factory specifications replicating the original design,...
Reproduction of the original windshield A-pillar designed for use with 1978-87 GM G-Body models with the t-top roof option. Each A-pillar is manufactured to correct factory specifications replicating the original design,...
Reproduction floor pan half for various 1978-88 G-Body 2 door models. Manufactured to factory specifications, featuring original style contours and stiffening ribs for added support matching the factory design. Comes with...
1978-88 Buick, Olds, Pontiac, Olds G-Body; Inner Rocker Panel; LH Driver Side
Reproduction inner rocker panel for various 1978-87 Buick, Chevrolet, Oldsmobile, and Pontiac G-Body models. Each rocker panel is manufactured to factory specifications featuring original style contours replicating the...
1978-88 Buick, Olds, Pontiac, Olds G-Body; Inner Rocker Panel; Passenger Side
Reproduction inner rocker panel for various 1978-87 Buick, Chevrolet, Oldsmobile, and Pontiac G-Body models. Each rocker panel is manufactured to factory specifications featuring original style contours replicating the...
Reproduction T-top header panel with weatherstrip retainer channels designed for 1978-87 Buick Regal, Type T, Limited, Grand National, and other GM G-Body models originally equipped with factory T-tops. Each panel is...
Reproduction rear floor pan repair panel for 1978-87 Regal and various 1978-88 GM A-Body and G-Body models. Manufactured for the purpose of repairing smaller sections of the floor pan without having to replace the complete...
1978-87 Regal, Grand National, 1978-88 GM A, G-Body; Front Floor Repair Panel; RH; EDP Coated
Reproduction front floor pan repair panel for 1978-87 Regal and various other 1978-88 GM A-Body and G-Body models. Manufactured for the purpose of repairing smaller sections of the floor pan without having to replace the...
Reproduction rear floor pan body mount repair plate kit for 1978-88 Monte Carlo, Cutlass, and Grand Prix, 1982-87 Regal, and 1984-86 Bonneville models. Manufactured in stamped steel to factory specifications, these plates are...
1978-88 GM A-Body, G-Body; Lower B-Pillar Panel; LH, Driver Side
Reproduction lower B-Pillar panel for 1978-88 GM A-Body, and G-Body models including Buick Regal. Replace the damaged or rusted panel on your classic GM vehicle with this quality reproduction panel. Each panel is manufactured...
Ford, Lincoln, Mercury Style; Floor Pan Plug; 3" x 4-1/2"
Galvanized and die stamped steel like the original plugs found on many Ford, Lincoln or Mercury models. The 3" x 4-1/2" floor pan plugs often need replaced from years of rust damage. Can be used as a universal fit plug on...
1967-79 Camaro, Firebird, Nova; Outer Cowl Side Panel; RH; Passenger Side; EDP Coated
Reproduction of the original outer cowl panel designed for use with various 1967-79 GM models including 1967-69 Camaro, Firebird, 1968-79 Nova, and GM X-body models. Each panel is manufactured in stamped steel to original...
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
OER® Professional Grade; Black Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER Professional Grade; Weld-Thru Galvanizing Spray Coating; Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz)
OER® Weld-Thru Galvanizing Primer is a smooth, cold galvanizing compound that chemically fuses to bare steel and forms an extremely rust-resistant barrier. Comes in a 16 Oz. Aerosol Can (Net Wt. 12 Oz.). Perfect for...
OER® Gray Professional Grade High Solids Sanding Primer Case of 6 - 20 Oz Aerosol Cans
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Gloss Black High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Flat Black High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Gray High Solids Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Professional Grade Gray Weld-Thru Galvanizing Spray Coating Case of 6 - 16 Oz Aerosol Cans
OER® Weld-Thru Galvanizing Primer is a smooth, cold galvanizing compound that chemically fuses to bare steel and forms an extremely rust-resistant barrier. Perfect for application on the inside of newly installed panels...
OER® Dark Gray High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
Reproduction of the original B-Pillar T-Top Corner repair panel for 1978-88 Buick, Chevrolet, Oldsmobile, and Pontiac G-Body models. Each roof corner panel is manufactured in stamped steel to factory specifications for a...
OER® High Solids Stainless Steel Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER Professional Grade Red Oxide Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Comes in a 20 Oz. Aerosol Can (Net Wt. 17...
OER® Gloss Black High Solids Detail Coating 16oz Net Weight
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
Reproduction of the original lower hinge pillar to rocker panel reinforcement section for use with 1967-69 Camaro, Firebird, and 1968-79 Chevy II, Nova and GM X-body models. Each panel is manufactured in stamped steel to...
OER® Professional Grade; Green Zinc Phosphate Primer; 16 Oz. Aerosol Can (Net Wt 12 Oz)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form...
OER® Professional Grade; Red Oxide High Solids Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz)
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
1961-73 GM; Floor Pan Metal Plug; Oval; with Weld Hole; without Notches; Various Models
Reproduction oval metal floor pan and trunk pan plug used by General Motors on various 1961-73 models. Located on both the front and rear floor pans and the trunk floor pan, this plug is manufactured using heavy gauge steel...
1967-81 GM; Molding Retainer Clip; Various Models & Applications
Reproduction molding clip for various GM models. These special clips are used to install a variety of moldings including the applications listed below. Sold individually. Use as required. Buick Applications: 1976-1979 Buick...
OER® Red Oxide Professional Grade High Solids Sanding Primer Case of 6 - 20 Oz Aerosol Cans
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Professional Grade; Gray Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 15 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Comes in a 20 Oz. Aerosol Can (Net Wt. 15...
1978-88 Regal, GM G-Body; Lower A Pillar; LH Driver Side
Reproduction lower A pillar repair panel for various 1978-88 G-Body models. Manufactured to factory specifications for proper fitment and appearance. Comes EDP coated for rust prevention. Replaces the often rusted out lower...
Reproduction of the original B-Pillar T-Top Corner repair panel for 1978-88 Buick, Chevrolet, Oldsmobile, and Pontiac G-Body models. Each roof corner panel is manufactured in stamped steel to factory specifications for a...
OER® Professional Grade Green Zinc Phosphate Primer Case of 6 - 16 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form a...
OER® Professional Grade Yellow Zinc Phosphate Primer Case of 6 - 16 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form a...
OER® Gray Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Black Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Red Oxide Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Black Wrinkle Finish Paint Case of 6 - 16 Oz Aerosol Cans
Black Wrinkle finish is a durable and long lasting finish, which has a unique, wrinkled texture. Its excellent finish for hiding imperfections like pitting, scratches or chips. Extremely durable formula resists oil, gas and...
OER® Aluminum High Solids Detail Coating Case of 6- 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
Reproduction of the original lower hinge pillar to rocker panel reinforcement section for use with 1967-69 Camaro, Firebird, and 1968-79 Chevy II, Nova and GM X-body models. Each panel is manufactured in stamped steel to...
OER® High Solids Stainless Steel Detail Coating 16 Oz Net Weight Aerosol Can
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Yellow Zinc Phosphate Primer; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form...