This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and Pontiac...
This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 65-70 Chevrolet Chevelle, Buick, Skylark, and Pontiac GTO models. These gearsets are heat treated...
Reproduction Hurst shifter rod & tab setup with metal bushings and clip kit for 1970-72 Pontiac GTO, LeMans, Tempest, Buick Skylark, Oldsmobile Cutlass and 1970-71 442 models with a 4-speed Muncie manual transmission....
1967-68 Skylark, Cutlass, GTO, Grand Prix; Hurst 4-Speed Manual Transmission; Shift Rods/Tabs Set
reproduction Hurst shifter rod & tab setup with metal bushings and clip kit for 1967-68 Pontiac GTO, LeMans, Tempest, Oldsmobile Cutlass and Buick Skylark models with a 4-speed manual transmission. These are 3/8? diameter...
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...
1964-66 Pontiac GTO, LeMans, Tempest; Clutch Bell Crank; Cross Shaft
New bell crank (z bar) for cars with manual transmission. It's what the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel....
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1966-67 Various GM Vehicles Including Skylark, LeMans, GTO; Clutch Bell Crank; Cross Shaft; Z-Bar
New bell crank (z bar) for cars with manual transmission. It's what the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel....
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
1969-72 GTO, Cutlass, Skylark; Hurst Shifter; Mounting Bracket
Reproduction of the Hurst shifter mounting bracket for various GM applications including GTO, Skylark, Cutlass models. This is an identicalMade from stamped steel and has a gold zinc coating for corrosion resistance and...
1964-66 Pontiac GTO, Oldsmobile Cutlass, Buick Skylark; Upper Clutch Rod
Reproduction of the correct clutch rod for 1964-66 Pontiac GTO, Oldsmobile 442 and Buick Skylark models. Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from...
Muncie 4-speed manual transmission shifter bracket for 1968-72 Skylark, Cutlass, Chevelle, El Camino and 1970-72 Monte Carlo models. This bracket is welded to the transmission crossmember and the shifter mounts to it. Used to...
1968-72 Various GM Vehicles Including Chevelle, LeMans, Cutlass; Upper Clutch Rod; Pedal To Z Bar
Reproduction of the correct clutch rod for 1968-72 Pontiac GTO Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from the Z bar to the clutch pedal. They...
Quality reproduction of the 1967-72 Hurst Competition shifter for various 1967-72 Buick Skylark, Gran Sport, GS 350 and GS 400 models. The shifter is designed for vehicles with or without a console and either bucket or bench...
A reproduction installation set for use when installing a Hurst Competition Plus shifter on 1968 and earlier Muncie 451 transmission. See various applications listed. Can also be used for custom installs on various passenger...
We now have a correct factory reverse lockout kit used on various GM models which include 1969-72 Pontiac GTO, Buick Skylark, Oldsmobile Cutlass models. Kit includes: Reverse tab - mounts on trans; rod that goes from the...
1963-71 GM; Various Models; Hurst 4-Speed Shift Knob; 3/8" Thread; Black With Chrome Base
Reproduction shift knob used with GM 4 speed Hurst transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1969-72 Cutlass, Skylark, GTO, GS; Hurst Shifter 3 Piece Tab Set
Reproduction Hurst shifter tab set for 1969-72 Pontiac GTO, Oldsmobile Cutlass, 442, W30, W31, Buick Skylark models with a Hurst shiter. These shifter tabs are die stamped they fit very and are a press to fit installation....
1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield
Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...
This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and...
Reproduction clutch bell crank (Z-bar) pivot stud nylon seat and retainer set for 1958-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a manual transmission. These plastic inserts allow the clutch bell crank...
Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...
Reproduction Steering Lock Out Swivel Insulator Bushing for 1969-72 GM A-Body, F-Body, and X-Body vehicles. Keep your steering lock-out system tight and rattle-free. Don't let a worn or missing insulator ruin the precise feel...
Restore smooth, factory-correct steering lock-out operation in your '69?'72 GM A, F, and X-body and bring back the crisp, positive action of your classic GM column with this precision-formed Steering Lock-Out Swivel Spring....
1967-74 Upper Clutch Push Rod Boot - Various Models
This OER® reproduction of the original upper push rod molded rubber boot is manufactured using correct E.D.P.M. rubber compound stock that is superior to the original. Molded in steel insert distributes mounting screw...
1953-2010 GM; Rear Axle / Transmission Ventilator; for 3/8" Hole
OER® reproduction of the original style ventilator used by GM on a wide range of applications from the 1950s through present-day cars and trucks. This ventilator is designed for use on rear axle housings, automatic...