1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair
Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....
1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; RH Passenger Side; Various Models
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; LH Drivers Side; Various Models
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
1968-74 Chevy II / Nova Front End Rebuild Kit; With Outer Tie Rod Ends Only
This kit includes a comprehensive assortment of front end parts designed to renew worn out front suspension components. Restore your handling and reduce front tire wear. This is an essential kit when upgrading your...
1968-74 Chevy II / Nova Front End Rebuild Kit; With Inner and Outer Tie Rod Ends
This kit includes a comprehensive assortment of front end parts designed to renew worn out front suspension components. Restore your handling and reduce front tire wear. This is an essential kit when upgrading your...
1967-69 Camaro, Firebird, 1968-74 Nova; Lower Tubular Control Arm Set; Pair
Enhance the handling performance of your 1967-69 Camaro Firebird, or 1968-74 Nova model withthese quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature...
1967-69 Camaro, Firebird; 1968-74 Nova; Upper Control Arms; Pair
Reproduction upper control arms for various GM models including 1967-69 Camaro, Firebird, and 1968-74 Chevy II, Nova models. These reproduction upper control arms includes pre-installed bushings, shafts and ball joints. If...
1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1971-2005 GM; Lower Control Arm Bushing; Passenger Car and Truck; Varius Models; Each
Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or...
Enhance the handling performance of your 1964-72 GM A-Body model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension geometry for enhanced...
1978-2003 Buick, Chevrolet, GMC, Oldsmobile; Spindle Set; LH and RH; Stock Replacement
Stock replacement spindle set for a variety of GM vehicles. Identical to the stock GM spindle, this replacement spindle set is manufactured in cast iron and comes finished in black. Replaces OE # 18060564 for the RH...
Drop spindle set for a variety of GM vehicles to provide a 2" drop. Each set is manufactured in cast iron and comes finished in black. Drop spindles are the best way to lower you truck while maintaining a stock ride and...
Reproduction disc brake spindle set for various 1967-69 Camaro, Firebird, 1968-74 Nova, X-Body, and 1964-72 Chevelle, A-Body models. Each brake spindle set is manufactured in forged steel replicating the original in design,...
Stock replacement spindle for a variety of GM vehicles. Identical to the stock GM spindle, this replacement spindle is manufactured in cast iron and comes finished in black. Replaces OE # 18060563 for the LH (driver) side....
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1962-87 Buick, Chevrolet Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set
This rivet-style bolt set attaches the ball joint to the upper control arm, providing the appearance of a real rivet. A serrated locking rivet head prevents spinning when the nut is tightened. Includes eight Grade 8 rivet...
1978-05 GM; Lower Control Arm Bushing; Rearward
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
1967-74 GM; Control Arm Ball Joint; Upper
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1964-74 GM; Lower Ball Joint; Various Models; RH or LH
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1978-87 Regal; Lower Control Arms: Rubber Bushings; Pair; Various Models
Reproduction lower control arms for various 1978-87 GM vehicles including 1978?87 Buick Regal, Grand National, Type T, and GNX models. Each lower control arm is manufactured in heavy duty steel to factory specifications and...
1978-87 Buick Regal, A-Body & G-Body; Upper Control Arms: Rubber Bushings; Pair; Various Models
Reproduction upper control arms for various 1978-87 GM A & G-Body intermediate vehicles including 1978?87 Buick Regal models. Each lower control arm is manufactured in heavy duty steel to factory specifications and features...
1967-69 Camaro, Firebird, 1968-74 Nova; Tubular Control Arm Set; Upper
Enhance the handling performance of your 1967-69 Camaro Firebird, or 1968-74 Nova model withthese quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature...
Enhance the handling performance of your 1964-72 GM A-Body model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension geometry for enhanced...
1970-05 GM Cars / Trucks; Lower Ball Joint (Standard Size); Thread: 9/16"
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Lower; LH Driver Side
Reproduction lower control arm for use on a variety of 1964-72 GM A-Body models. Each control arm is manufactured in stamped steel to OE specifications for a precise fit and reliable performance. This complete assembly...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Lower; RH Passenger Side
Reproduction lower control arm for use on various 1964-72 GM A-Body models. Manufactured in stamped steel to OE factory specifications for a precise fit and reliable performance. Each assembly includes pre-installed round...
1971-96 GM; Upper Control Arm Bushing; Various Models; Pair
Reproduction style upper control arm bushing designed for various 1971-96 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1967-74 Camaro, Firebird, Nova, Omega, Ventura, Apollo; Front End Bushing Kit
The control arm bushings are an essential ingredient in maintaining control of the vehicle. Worn-out bushings are likely to effect the performance and handling of your classic. Replacing the old bushings can not only increase...
Stock replacement spindle for a variety of GM vehicles. Identical to the stock GM spindle, this replacement spindle is manufactured in cast iron and comes finished in black. Replaces OE # 18060564 for the RH (passenger) side....
1970-96 GM Lower Control Arm Bumper, Each, Various Models
OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...
1977-96 GM; Upper Control Arm; With Shaft; RH
Replacement upper control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement upper control arm includes pre-installed bushings and ball...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1971-2005 GM; Lower Ball Joint; Thread: 5/8"; RH or LH; Each
Reproduction of the original style lower ball joint for a variety of 1971-2005 GM models as listed. Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving...
1970-05 GM Cars / Trucks; Lower Ball Joint (.0025 Oversize)
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Upper; RH Passenger Side
Reproduction upper control arm for various 1964-72 GM A-Body models including Chevelle, Malibu, El Camino, Monte Carlo, GTO, Lemans, Tempest, Cutlass, F85, 442, Skylark, Special, GS models. This reproduction upper control arm...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Upper; LH Driver Side
Reproduction upper control arm for various 1964-72 GM A-Body models including Chevelle, Malibu, El Camino, Monte Carlo, GTO, Lemans, Tempest, Cutlass, F85, 442, Skylark, Special, GS models. This reproduction upper control arm...
1961-75 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bumper; Each
Quality reproduction of the original upper control arm bumper designed for use with various 1967-75 General Motors models. Each bumper is manufactured in heavy duty EPDM molded rubber material to original specifications...
1966-74 Camaro, Firebird, Nova; Lower Control Arm Bushing; Each
Chevrolet Applications: 1967-1968 Chevrolet Camaro (toward front of vehicle) 1969-1969 Chevrolet Camaro (toward front of vehicle) 1970-1970 Chevrolet Camaro (toward rear of vehicle) 1966-1969 Chevrolet Chevelle (toward rear...
1964-75 Camaro, Chevelle, Firebird, GTO; Upper A-Arm Bolt and Nut Set; 8 Piece Set
Reproduction of the upper control arm cross shaft bolt set used to retain the shaft to the frame mounting ears on various GM vehicles. The grade 8 ratings nuts & bolts are made from high strength steel which as been formed...
1964-74 GM; 2" Drop Spindles; with Disc Brakes; RH and LH; Pair
Reproduction of the original style 2" drop spindles for various 1964-72 Buick, Chevrolet, Pontiac, and Oldsmobile A, F, and X body models. These 2" drop spindles will replace OE single piston disc brake spindles. The stock...
1973-76 Impala / GM Full Size Steering Center Link
Reproduction drag link for 1973-76 Chevrolet Impala and full size models. Includes hardware. Ready to install. This center link is made of hot-forged alloy steel for superior strength and is coated to help provide rust...
1978-98 GM Cars & Trucks; Lower Control Arm Bushing; (Toward Front of Car)
Reproduction control arm bushing for the front position in the lower control arm on various Gm vehicles as listed. Rubber bushing is encased in steel sleeve as original. Sold individually. Specifications Material: Steel Clad...
1982-2003 GM; Upper Control Arm Bushing; Pair; Varuous Models
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
1955-74 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bushing; Each; Various Models
1958-1970 Chevrolet Biscayne 1958-1970 Chevrolet Bel Air 1966-1970 Chevrolet Caprice 1970-1972 Chevrolet Monte Carlo 1968-1968 Chevrolet Chevy II 1968-1974 Chevrolet Nova 1955-1957 Chevrolet Bel Air 1955-1957 Chevrolet One...
1966-74 Camaro, Nova, Impala, Caprice; Lower Control Arm Bushing; Each
Reproduction of the original control arm bushing designed for the lower control arm on various 1966-74 GM F-body, B-body, and X-body models. Manufactured in steel clad rubber to be pressed into place. If your suspension...
1971-72 GM Full Size Passenger Car; Center Link
Reproduction drag link/center link for 1971-72 Chevrolet Impala and various other GM full size models as listed. Includes hardware. Full ball stud pitman arm end, greaseable, self aligning no bind design, low friction, and...
1961-1994 GM, Ford; Upper Control Arm Bushing; Front or Rear; Various Applications
Reproduction of the original control arm bushing designed for use on the the upper control arm for various 1961-1994 GM and Ford models. Manufactured in steel clad rubber that replicates the original control arm bushing in...
1971-2005 GM; Rear Lower Control Arm Bushing; Each; Various Models
Reproduction control arm bushing for the lower control arm on various 1971-2005 GM models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or going over...
Spindle Nut & Cotter Pin; 3/4"-20 With 1-1/16" Hex Head
3/4"-20 With 1-1/16" hex head spindle nut and plated 1/8" x 1-1/2" cotter pin for securing drum or rotor to spindle. Kit contains one nut and one cotter pin. 2 kits required per vehicle. {fitment}
1970-87 Buick, Chevrolet, Olds, Pontiac; Upper Control Arm Bumper; Various Models; Each
Reproduction control arm bumper for Buick, Chevrolet, Oldsmobile, and Pontiac models. This upper control arm bumper is designed to replicate the factory original and is essential for proper suspension travel and ride control....