1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
1991-96 Chevrolet Caprice/Impala; Fuel Tank Kit; With Neck, Hoses, Clamps, and Hardware
OER Replacement silver powder-coated steel fuel tank for 1991-96 Caprice/Impala and other GM models. The original plastic fuel tank is the weak link in the fuel system of the full size GM passenger car. Prone to cracking and...
Reproduction of the original style fuel tank designed for use with 1975-76 Impala, Bel Air, and Caprice station wagon models (except 2 and 4 door coupe models). Each fuel tank is manufactured in quality stamped steel and zinc...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1982-85 Citation, Skylark, 1982-84 Omega, Phoenix; Zinc Plated Fuel Tank; GM10B
OER Authorized reproduction fuel tank for 1982-83 Chevrolet Citation, 1984-85 Citation II, 1982-85 Skylark, 1982-84 Omega, Phoenix models. Each tank is manufactured in quality stamped steel featuring a galvanized zinc coating...
1973-77 Chevelle, Regal, Cutlass, LeMans; 19 Gallon Fuel Tank; w/o Filler Neck;
Reproduction fuel tank for various 1973-77 GM A-Body models including Chevelle, Regal, Cutlass and LeMans. This reproduction fuel tank is manufactured in quality stamped steel featuring a zinc coating for rust and corrosion...
1975-79 Nova, Apollo, Ventura, Omega; NiTerne Fuel Tank; 21 Gallon
Correct reproduction of the original fuel tank designed for with 1975-79 Chevrolet Nova and GM X-body models as listed below. This reproduction fuel tank is manufactured in Niterne steel. This is a 21 gallon fuel tank that...
1957-69 Buick, 1968-70 Chevrolet; Vented Gas Cap; with Markings
Reproduction GM gas cap that includes the correct "S" rivet and properly engraved markings. Manufactured and designed from the original OEM cap, the quality and materials are manufactured to exact specification with the "show...
1975-79 Nova, Apollo, Ventura, Omega; Fuel Tank; Zinc Coated; 21 Gallon Tank
Correct reproduction of the original fuel tank designed for with 1975-79 Chevrolet Nova and GM X-body models as listed below. This reproduction fuel tank is manufactured in zinc coated steel and includes the fuel sender...
Reproduction fuel tank for 1984-87 Buick Regal 2 door models equipped with a fuel injected 3.8L V6 engine. Manufactured to factory specifications, featuring original size, contours, filler neck, and come zinc coated for...
1978-87 Regal, 78-81 Cutlass; 4 Door; Fuel Tank; 17 Gallon; Zinc Coated
Reproduction tank for 1978-87 Buick Regal 4 Door models equipped with a carburated engine. Each fuel tank is manufactured in quality stamped steel to original factory specifications, featuring original size, contours, filler...
Reproduction fuel tank for carbureted gasoline powered or diesel powered 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac station wagon, El Camino and Caballero models. This fuel tank is manufactured in zinc-coated...
Reproduction fuel tank for carbureted gasoline or diesel powered 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac models. This fuel tank is manufactured in zinc-coated stamped steel to original factory...
Reproduction of the original style fuel tank designed for use with 1980-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac Full Size models as listed except station wagon. This fuel tank is manufactured in zinc-coated...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
Reproduction fuel tank sending unit for 1965-66 Chevrolet Impala, Bel Air, Biscayne, Caprice models and 1965-67 Chevelle, El Camino, Malibu and other GM A-Body and B-Body models with 5/16" line. The most accurate reproduction...
Reproduction of the original style fuel tank mounting straps designed for use with 1976-81 Camaro, Firebird, and 1976-79 Nova, and X-body GM models. Each strap is manufactured in quality stainless steel to original factory...
Reproduction of the original style fuel tank mounting straps that fit various 1964-1966 Buick, Chevrolet, Pontiac, and Oldsmobile mid-size, and full size models as listed (except station wagon). Each strap is manufactured in...
1968-69 Chevelle, El Camino, GTO, Skylark, LeMans, Tempest; Accelerator Pedal Assembly
Reproduction accelerator pedal assembly for 1968-69 Chevelle, El Camino, GTO, Skylark, LeMans, and Tempest models. Manufactured to factory specifications, this assembly includes the pedal pad, mounting arm, and firewall...
1976-81 Camaro, Firebird; 1976-79 Nova; Fuel Tank Mounting Straps; Pair
Reproduction fuel tank mounting straps produced using heavy duty zinc-plated pre-formed steel for an original appearance. If you are replacing your gas tank or restoring your classic, you may want to replace your old gas tank...
Reproduction of the original style fuel tank mounting straps that fit various 1964-1966 Buick, Chevrolet, Pontiac, and Oldsmobile mid-size, and full size models as listed (except station wagon). Each strap is manufactured in...
Reproduction of the original fuel tank mounting straps designed for use with 1974-75 Camaro, Firebird, and 1973-75 Nova and GM X-Body models. Each strap is produced using heavy duty pre-formed steel for an original...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
Reproduction fuel tank sending unit for 1968-70 Chevrolet Chevelle, El Camino, Pontiac GTO, Tempest, LeMans, Buick Skylark, GS, Oldsmobile Cutlass, 442, and 1970 Chevrolet Monte Carlo models. Manufactured to factory...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Reproduction fuel tank sending unit for 1964 Chevrolet Chevelle, El Camino, Pontiac GTO, LeMans, Tempest, Buick Skylark, and Oldsmobile Cutlass and 442 models. Manufactured to factory specifications, this sending unit...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Reproduction fuel tank mounting strap set for various 1977-1988 Buick, Chevrolet, Pontiac, and Oldsmobile full size models as listed (except station wagon). Each strap is manufactured in quality stamped steel, galvanized and...
1968-72 Buick Skylark; Fuel Line Retaining Clips; 1/4" to 3/8" lines; 3 Piece Set
Reproduction fuel line retaining clip for 1/4" to 3/8" fuel lines for 1968-72 Buick Skylark models. This application uses 3 of these special clips per car. These are used on the driver side frame to hold lines in place. Sold...
1973-77 Chevelle, Regal, Cutlass, LeMans; Fuel Tank Filler Neck; 13-1/4" Long, 2" Diameter
Reproduction of the original fuel tank filler neck designed for various 1973-77 GM A-Body models including Chevelle, Regal, Cutlass and LeMans models. Each neck is manufactured to factory dimensions and replaces the original...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Reduce heat coming off of the intake with this reproduction carburetor base gasket with heat shield, installs between the carburetor and intake manifold. This gasket and shield was original equipment for most 1970 Chevrolet...
Reproduction of the original fuel tank mounting straps designed for use with 1958 Impala, Bel Air, Biscayne, Brookwood, and Nomad station wagon models. Each strap is manufactured in quality stamped steel, galvanized and EDP...
Reproduction of the original fuel tank mounting straps designed for use with various 1973-77 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured with high strength corrosion-resistant stamped steel to factory...
1967-73 Skylark, Riviera, Regal; Accelerator Return Spring; Bracket
This is the factor throttle/accelerator return spring bracket that attaches to the intake and hold returns spring. For various Buick models including Electra, Skylark, Regal, LeSabre. Sold individually. See vehicle fitment...
1974-81 Outer Accelerator Pull Spring
Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...
Reproduction of the original OE rubber bumper for use with 1979-86 Chevrolet and GMC C/K pickup truck models, and 1987-91 Chevrolet and GMC R/V models. Also fits other areas of the vehicle including the heat exhaust shield,...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
Reproduction of the original style fuel tank designed for use with 1970-74 Impala, Bel Air, Biscayne, Catalina, Bonneville and GM full size station wagon models. This fuel tank is made of zinc-coated steel and has a capacity...
Reproduction of the original style fuel tank designed for use with 1968-70 Impala, Bel Air, Biscayne, Catalina, Bonneville station wagon models. This fuel tank is made of zinc-coated steel and has a capacity of 22 gallons (91...
1973-1974 Apollo, Nova, Omega, Ventura; Ni-Terne Coated Fuel Tank; 21 Gallon Capacity
Reproduction of the original Ni-Terne fuel tank designed for use exclusively with 1973-74 Buick Apollo, Chevrolet Nova, Oldsmobile, Omega, Pontiac Ventura models. This OE-quality Ni-Terne coated reproduction stamped steel...
1975-77 Regal and Cutlass; Fuel Tank; Zinc Coated; 21.9 Gallon Capacity
Reproduction fuel tank for 1975 Buick Regal and Oldsmobile Cutlass models and 1976-77 Buick Regal and Oldsmobile 4 door models (except wagon). Each fuel tank is manufactured to correct factory specifications featuring...
1973-74 Nova, Ventura, Omega, Apollo; Zinc Coated Fuel Tank; 21 Gallon
Reproduction of the original fuel tank designed for use with 1973-74 Chevrolet Nova, 1973-74 Pontiac Ventura, Olds Omega, and Buick Apollo models with Evaporative Emission Control (EEC). Each fuel tank is manufactured in...
1976-81 Camaro, Firebird, 1973-79 Nova, X-Body; Fuel Tank Sending Unit; with Return Line; 3/8" Line
Reproduction fuel tank sending unit for a variety of GM models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send...
Replacement fuel tank without filler neck for carbureted gasoline powered 1977-79 Chevrolet passenger models (except wagon). This fuel tank measures 39-3/4" x 26-1/2" x 9-1/4" and has a capacity of 19 gallons. Includes the...
Reproduction fuel tank for 1968-69 Chevrolet Chevelle and 1970 Buick Skylark, GS and GS455 models. This reproduction fuel tank is manufactured in quality stamped steel featuring a zinc coating for rust and corrosion...
Reproduction of the original fuel tank designed for use with 1978-87 Buick Regal 2 door models equipped with a carburated engine. Each fuel tank is manufactured in quality stamped steel to original factory specifications,...
Reproduction of the original style fuel tank designed for use with 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac station wagon models. This fuel tank is manufactured in zinc-coated stamped steel to original...
Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...
1973-75 Apollo, Nova, Omega, Ventura; Fuel Tank Sending Unit; 3/8" Single Fuel Line
Reproduction of the original fuel tank sending unit designed for use with 1973-75 Chevrolet Nova and GM X-body models with single 3/8 fuel line. After years of use, your fuel sending unit can wear out or stop working. When...
1976-81 Buick, Chevy, Olds, Pontiac; Fuel Tank Sending Unit; 3/8" Single Line
After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1991-96 Impala, Caprice; Sedan; Fuel Filler Neck; with Fuel Cap; Except Station Wagon Models
Reproduction of the original style steel fuel tank filler neck designed for use with 1991-96 Caprice, Impala, Hearst Limousine, Buick Roadmaster and other GM full size models. Each filler neck assembly is manufactured in...
1973-77 GM A-Body; Fuel Tank Sending Unit; with A/C; 3-Lines; Regal, Century, Chevelle, Laguna
Reproduction of the original fuel tank sending unit designed for use with 1973-77 GM A-body models with 3/8" line. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause your...
Reproduction of the original fuel tank sending unit for use with various 1973-77 Regal, Century, Chevelle, Laguna, Malibu, Monte Carlo, etc. models as listed. These sending units will replace the old or worn out original...