1968-79 Camaro, Chevelle, Impala, Nova, Ventura; Rear License Plate Bracket; with Hinge; EDP Coated
Reproduction rear license plate bracket designed for various 1968-79 GM models. This authentic OE-style bracket is manufactured from quality stamped steel and includes a spring-loaded hinged door that allows access to the...
1981-87 Buick Regal; Front Bumper Reinforcement Bar; 2-Door Coupe; EDP Coated
Reproduction front bumper reinforcement bar for 1981-87 Buick Regal 2-door coupe models. Each reinforcement bar is manufactured to original factory specifications replicating the OE design featuring correct mounting...
1981-87 Buick Regal; Rear Bumper Reinforcement Bar; 2-Door Coupe; EDP Coating
Reproduction rear bumper reinforcement bar for 1981-87 Buick Regal 2-door coupe models. Each reinforcement bar is manufactured to original factory specifications replicating the OE design featuring correct mounting locations....
1971 Buick Skylark, GS, GS 455; Front & Rear Bumper OEM Bolt Kit
Front and rear bumper OEM hardware bolt kit for 1971 Buick Skylark and GS models. This kit is recommended when re-chroming bumpers. This Kit Includes: 2- 7/16" x 1 1/4" Stainless Bolts, 6- 7/16" x 1" Stainless Bolts,10- 7/16"...
1970 Buick Skylark, GS, GS 455; Front & Rear Bumper OEM Bolt Kit
Front and rear bumper OEM hardware bolt kit for 1970 Buick Skylark and GS models. This kit is recommended when re-chroming bumpers. Bumper bolt kit. This kit includes: 8 of 7/16" x 1" stainless bolts, 14 of 7/16" phosphate...
1981-87 Buick Regal; Front Bumper Impact Shocks; Aluminum; Pair
Reproduction of the original style aluminum front bumper support shock/bracket for use with 1981-87 Buick Regal models. These bumper supports weigh close to a pound and combine for a total weight savings of 7.4 pounds over...
1972 Buick Skylark, GS 455, GS; Front Bumper Rubber Impact Strip
This is the rubber front bumper impact strip for 1972 Buick Skylark, GS and GS 455 models. Originally, it was three separate pieces. This is a one piece unit that can be cut, but is not necessary. This piece attaches with...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1981-87 Buick Regal; Front Bumper Guard; Chrome; 2 Door; LH Drivers Side; OER
Reproduction of the original front bumper guard designed for use on 1981-87 Regal, Grand National, T-Type, and GNX models equipped with a chrome front bumper. Each bumper guard is manufactured to factory specifications...
1981-87 Buick Regal, Grand National; Rear Bumper Guard; Chrome; 2 Door; LH Driver Side
Reproduction of the original rear bumper guard designed for use on 1981-87 Regal, Grand National, T-Type, and GNX models equipped with a chrome rear bumper. Each bumper guard is manufactured to factory specifications...
1981-87 Buick Regal; Rear Bumper Guard; Chrome; 2 Door; RH Passenger Side
Reproduction of the original rear bumper guard designed for use on 1981-87 Regal, Grand National, T-Type, and GNX models equipped with a chrome rear bumper. Each bumper guard is manufactured to factory specifications...
1981-87 Buick Regal, Grand National; Front Bumper Guard; 2 Door; RH Passenger Side; Black EDP Coated
Reproduction of the original front bumper guard designed for use on 1981-87 Regal, Grand National, T-Type, and GNX models equipped with a chrome front bumper. Each bumper guard is manufactured to factory specifications...
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1971?73 Buick & Oldsmobile License Plate Bracket; except Station Wagon Models
Upgrade your restoration or replace a damaged original with this high-quality reproduction license plate bracket, designed specifically for 1971?1973 Buick and Oldsmobile models, excluding station wagons. Manufactured to...
1970-72 Buick Skylark, GS, GS 455; Front Bumper Guard Impact Strip; GM# 1239122
Reproduction of the original front bumper guard impact strip for 1970-72 Buick Skylark, GS and GS 455 models. This reproduction attaches to the bumper guard and acts as an impact point that helps protect the bumper from minor...
1981-87 Buick Regal; Front License Plate Bracket; Polished Chrome
Reproduction front bumper license plate bracket for 1981-1987 Buick Regal, Grand National, Type T, GNX, and Limited models. Each bracket is manufactured to correct factory specifications for an authentic appearance and...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
1979-81 Firebird, Trans Am; Rear License Plate Bracket
Correct reproduction rear license plate bracket for 1979-81 Pontiac Firebird and Trans Am and a variety of other GM models. Each bracket is manufactured in stamped steel to the original configuration featuring correct...
Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut
Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...
7/16"-14 X 1" Bolt With Hex Nut; Zinc Plated; With 29/32" Flat Stainless Steel Cap
This stainless capped bolt is used on both the front or rear, features the correct style head and includes a hex nut. Manufactured in zinc plated material, measures 7/16"-14 and is 1" and features a stainless steel cap. Head...
1972 Buick Skylark, GS, GS 455; Front & Rear Bumper OEM Bolt Kit
Front and rear bumper OEM hardware bolt kit for 1972 Buick Skylark and GS models. This kit is recommended when re-chroming bumpers. This Kit Includes: 2- 7/16" x 1 1/4" Stainless Bolts, 6- 7/16" x 1" Stainless Bolts,10- 7/16"...
1981-87 Buick Regal; Rear License Plate Pocket; Black
Reproduction of the original license plate pocket designed for use with 1981-87 Buick Regal models as listed. Each pocket is manufactured injection-molded material to correct factory specifications replicating the original...
Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...
License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear
Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...
1968-70 Buick/Oldsmobile License Plate Holder Bracket
Reproduction license plate holder bracket to fit a variety of Buick and Oldsmobile models. Stamped steel with tension springs as original. Buick Applications: 1968-70 Skylark and GS models Oldsmobile Applications: 1968-70...
1981-87 Buick Regal; Front Bumper Guard; Chrome; 2 Door; RH Passenger Side; OER
Reproduction of the original front bumper guard designed for use on 1981-87 Regal, Grand National, T-Type, and GNX models equipped with a chrome front bumper. Each bumper guard is manufactured to factory specifications...
License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...
License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)
Correct replacement license plate nylon nut insert and slotted pan head screw used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality...
1981-87 Buick Regal, Grand National; Front Bumper Guard; 2 Door; LH Drivers Side; Black; EDP Coated
Reproduction of the original front bumper guard designed for use on 1981-87 Regal, Grand National, T-Type, and GNX models equipped with a chrome front bumper. Each bumper guard is manufactured to factory specifications...
1981-87 Buick Regal, Grand National, GNX; Rear Bumper Guard; 2 Door; Black EDP Coated; LH
Reproduction of the original rear bumper guard designed for use on 1981-87 Regal, Grand National, T-Type, and GNX models equipped with a paintable rear bumper. Each bumper guard is manufactured to factory specifications...
Reproduction of the original rear bumper guard designed for use on 1981-87 Regal, Grand National, T-Type, and GNX models equipped with a paintable rear bumper. Each bumper guard is manufactured to factory specifications...
1981-1987 Buick Regal; Front License Plate Bracket; Black
Reproduction front bumper license plate bracket for 1981-1987 Buick Regal, Grand National, Type T, GNX, and Limited models. Each bracket is manufactured to correct factory specifications for an authentic appearance and...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1/2" Hole; GM # 14103461; 25 Pieces
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold in set of 25 pieces. Use as required....
7/16"-14 X 1-3/8"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head
This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 7/16"-14 X 1-3/8" and features a stainless steel cap. Head diameter 7/8". Shoulder length...
7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish
7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish. Sold inidvidually.
Original Equipment Reproduction License Plate
Put a highly visible accent on your restoration with a quality aluminum OER® license plate, a recognized symbol of originality and authenticity.
M6-1.0 Metric Standard Flange Spin Lock Nut with Serrations; Pair
M6-1.0 metric standard flange spin lock nut with serrations. Sold as a pair.
1981-87 Buick Regal; Front Bumper Reinforcement; 2- Door; Aluminum
This front bumper inner reinforcement mounts behind the bumper to help mitigate the impact on your vehicle in the event of a collision. This bumper reinforcement is made of aluminum and are less than half the weight of the...
1981-87 Buick Regal, Grand National 2 Door; Rear Bumper Impact Strip; with White Line Accent
Reproduction rear bumper impact strip for 1981-87 Buick Regal 2 door models. Manufactured to factory specifications for proper fitment and appearance. The impact strip is inserted into the front bumper. Note: This bumper...
Reproduction front bumper impact strip for 1981-87 Buick Regal models. Manufactured to factory specifications for proper fitment and appearance. The impact strip is inserted into the front bumper. Note: This bumper impact...
License Plate Mounting Kit; Features Slotted Round Washer Head Screws; (4 Screws, 4 Nuts)
This license plate mounting set comes with four plastic nuts and four screws, which is enough to mount one license plate. These are original style nuts and screws, and they'll make sure your license plate stays securely...
1955-77 Ford; Bumper Bolt; Stainless Steel Cap; 7/16-14 x 1-1/2"; Various Models; Box of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
5/16-18" x 3/4" Bolt; With Stainless Steel Cap; Each
Reproduction 5/16-18" x 3/4" bumper bolt with stainless steel cap for various Ford and other models. Perfect as a replacement for the small 1964-70 Mustang front bumper end mounting bolt. Sold individually. Specifications:...
1981-87 Buick Regal; Rear Bumper Reinforcement; 2- Door; Aluminum
This rear bumper inner reinforcement mounts behind the bumper to help mitigate the impact on your vehicle in the event of a collision. This bumper reinforcement is made of aluminum and are less than half the weight of the...
7/16-14 x 1-1/2"; Bumper Bolt; Stainless Steel Cap; Each
Reproduction bumper bolt that measures 7/16-14 x 1-1/2" with a stainless steel cap and round head willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company models. Sold...
Push-in retainer clip, also know as a blind rivet for various GM applications. Fits a wide number of applications including front and rear bumper fascia, and other urethane and plastic body components. Fits 1/2" hole. Set of...
7/16"-14 x 1-1/4" Hex Bolt, Grade 5, Zinc
7/16"-14 x 1-1/4" Hex Bolt, Grade 5, Zinc chromate finish. Sold individually.
Reproduction license plate / fuel door stoppers for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note: REV. 5-80 (cut 1/4"...
1981-87 Regal, Grand National; Rear Bumper Impact Strip; 2 Door; without White Line Feature
Reproduction rear bumper impact strip for 1981-87 Buick Regal models. Manufactured to factory specifications for proper fitment and appearance. The impact strip is inserted into the front bumper. Note: This bumper impact...