Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
Reproduction front bumper for 2003-07 Chevrolet Silverado and 2002-06 Avalanche (without body cladding) models. Each front bumper is manufactured to OE specifications ensuring a proper fit and appearance. Will replace the...
Reproduction rear bumper reinforcement or trailer hitch draw bar for various 1999-07 GMT800 Series pickup, 2000-06 Chevrolet Suburban, Tahoe, Yukon, 2002-13 Avalanche, 2007-13 Cadillac Escalade. Manufactured in heavy duty...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Reproduction factory fender flare for 1999-02 Silverado and Sierra Pickup, 2000-06 Tahoe, Yukon, and 2002-06 Avalanche. Manufactured in high-impact ABS, as original. Replaces OE # 88979839, 15054631, or Partslink # GM1268101....
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Reproduction of the original door glass for 1999-2007 Chevrolet, GMC pickup truck, Avalanche, Silverado, Yukon, Sierra, and Suburban 4 door models. Each door glass is molded in tempered glass with the correct shape and...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
1967-81 GM; Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; for Hood Hinges; 8 Piece Set; Various Models
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
Reproduction lower front air deflector unit for 2002-06 Chevrolet Avalanche, 2003-06 Silverado, and 2007 Silverado Classic models. Manufactured from durable injection-molded gray textured plastic, this reproduction piece is...
Reproduction door window regulator for power windows on 1999-07 Silverado, Sierra trucks and 2000-2006 SUV models. Each regulator is made to original factory specs to replace the worn or inoperative regulator in the front...
Reproduction door window regulator for power windows on 1999-07 Silverado, Sierra trucks and 2000-2006 SUV models. Each regulator is made to original factory specs to replace the worn or inoperative regulator in the front...
Reproduction NON-heated power remote side view mirror for 1999-02 Silverado/Sierra, 2000-02 Tahoe/Yukon, and 2000-02 Suburban/Yukon XL models. Fits Left Hand (Driver) Side with 8-head, 3-pin connector. Replaces OE # 15055274,...
Reproduction NON-heated power remote side view mirror for 1999-02 Silverado/Sierra, 2000-02 Tahoe/Yukon, and 2000-02 Suburban/Yukon XL models. Fits Right Hand (Passenger) Side with 8-head, 3-pin connector. Replaces OE #...
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
Hex Washer Head Spin Lock Bolt; Phospate Coating; 5/16" X 18 X 1-1/4"; Set of 24
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished in a black phospate coating for an authentic original appearance and corrosion resistance. Set of 24. Use as required. Product Specifications: Thread...
Reproduction of the original Trico Style wiper blade refill designed for use on the various models that require a 16" Trico style rainbow type wiper blade. Each wiper blade assembly will replace the original and offer years...
Reproduction manual side view mirrors for 1999-07 Silverado/Sierra, 2000-06 Tahoe/Yukon, Suburban/Yukon XL, and 2002-06 Avalanche and Escalade models. Available in black textured finish with chrome plated cover. Fits Right...
#10-24 x 1"; Phillips Oval Head Head Machine Screw; Stainless Steel
Stainless Steel Phillips #10-24 x 1" Oval Head Head Machine Screw. Sold individually. Specifications: Thread Diameter : 10-24 Length : 1" Head Style : Phillips Oval Head Size : Std Material : 18-8 Stainless Steel
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
Reproduction exterior door handle for various Chevrolet and GMC truck models. The exterior door handle is manufactured to match the original GM design. Will replace the faded or damaged original. Includes gasket. {fitment}
1999-07 Chevy GMC Truck, SUV; Exterior Door Handle; with Key Hole; Chrome; Front; LH Drivers Side
Reproduction exterior door handle for various Chevrolet and GMC truck models. The exterior door handle is manufactured to match the original GM design. Will replace the faded or damaged original. Includes gasket. {fitment}
Reproduction door window regulator for manual operated windows on 1999-07 Silverado, Sierra trucks and 2000-2006 SUV models. Each regulator is made to original factory specs to replace the worn or inoperative regulator in the...
1999-07 Chevrolet, GMC Truck/SUV; Exterior Door Handle; All Chrome; Rear Side Door; Left
Reproduction exterior door handle for various Chevrolet and GMC truck models. The exterior door handle is manufactured to match the original GM design. Will replace the faded or damaged original. Includes gasket. {fitment}
2003-07 Chevrolet Silverado GMT800 Truck, 2002-06 Avalanche; Hood Latch Assembly; Various Models
Reproduction hood latch assembly for 2002-06 Avalanche without body cladding and 2003-07 Silverado GMT800 models with alarm system. Each latch is designed as a direct replacement for the worn or inoperative original....
Replacement washer pump designed for use with various 1970-2018 General Motors vehicles as listed. This quality replacement washer pump is an alternative to the original, and more expensive Delco washer pump. Installs as...
Reproduction manual side view mirrors for 1999-07 Silverado/Sierra, 2000-06 Tahoe/Yukon, Suburban/Yukon XL, and 2002-06 Avalanche and Escalade models. Available in black textured finish. Fits Left Hand (Driver) Side. Replaces...
1999-07 Chevrolet, GMC Truck/SUV; Exterior Door Handle; Without Key Hole; All Chrome; Front; Right
Reproduction exterior door handle for various Chevrolet and GMC truck models. The exterior door handle is manufactured to match the original GM design. Will replace the faded or damaged original. Includes gasket. {fitment}
U-Nut Set; M6 - 1.0; Panel Range.030" to.160"; Black Phosphate; 25 Piece Set
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160"). Set of 25 u-nuts. Specifications: OE #: 11503957 Quantity:...
Reproduction windshield washer jar and cap for various 1999-07 Chevrolet and GMC pickup, and SUV models with RPO: YE9 Convenience Package. The jar is manufactured to correct factory specifications offering an authentic...
1999-06 Silverado/Sierra 1500; Bumper Impact Bar Bracket; Front; Inner; RH Passenger Side
Reproduction of the original front inner bumper impact bar bracket for 1999-06 Chevrolet and GMC GMT800 Series truck models including 1999-06 Silverado, Sierra, 2002-06 Avalanche, and 2000-06 Suburban, Tahoe, Yukon and Yukon...
1999-07 Chevrolet, GMC Truck/SUV; Exterior Door Handle; Black Textured; Rear Side Door; Right
Reproduction exterior door handle for various Chevrolet and GMC truck models. The exterior door handle is manufactured to match the original GM design. Will replace the faded or damaged original. Includes gasket. Replaces...
1999-07 Chevrolet, GMC Truck/SUV; Exterior Door Handle; Black Smooth; Rear Side Door; Right
Reproduction exterior door handle for various Chevrolet and GMC truck models. The exterior door handle is manufactured to match the original GM design. Will replace the faded or damaged original. Includes gasket. {fitment}
1999-07 Chevrolet, GMC Truck/SUV; Exterior Door Handle; Black Smooth; Rear Side Door; Left
Reproduction exterior door handle for various Chevrolet and GMC truck models. The exterior door handle is manufactured to match the original GM design. Will replace the faded or damaged original. Includes gasket. {fitment}
Reproduction of the original exterior door handle designed for use with various Chevrolet and GMC truck models. Each handle is precisely manufactured to match the factory GM design, ensuring proper fit, function, and...
Replacement black nylon 1-3/4" hood insulation retainer is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models...
Installation hardware set for various 1985-92 Camaro models including IROC-Z models. Each set includes 18 of reproduction # 11508023 bolt. Specifications: Quantity: Set of 18 Class: 9.8 Color: Black Phosphate Material: Steel...
Tapping Screw; Hex Washer Head; #8-18 x 1/2" Long; Black Oxide
Hex, washer head #8-18 x 1/2 tapping screw, in phosphate and oil coating for various applications including mounting grill to various classic vehicles Screw Specs: Description : Tapping Screw Screw Size : #8 Length : 1/2"...
Reproduction exterior door handle for various Chevrolet and GMC truck models. The exterior door handle is manufactured to match the original GM design. Will replace the faded or damaged original. Includes gasket. {fitment}
Hex Bolt; 1/2"-13 x 4" LG; Gd 8; Yellow Dichromate
Hex Bolt; 1/2"-13 x 4" Lg; Gd 8; Yellow Dichromate Application 1973-1980 Chevrolet/GMC Radiator Core Support; STD Cab 1/2 & 3/4 Ton 1973-1980 Chevrolet/GMC Radiator Core Support; Crew Cab 3/4 Ton 1973-1980 Chevrolet/GMC Front...
Reproduction front outer bumper brace for 1999-02 Chevrolet and GMC GMT800 Series Silverado 1500, Sierra 1500, and 2000-06 Suburban, Tahoe, and Yukon models. Each bracket is manufactured in stamped steel to original factory...
1955-74 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 3/4"; Black Phosphate; 10 Piece Set
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. The OER® Authorized logo represents...
Bolt, 1/4-20 x 1-3/16" Dog Point Tip With Free Spinning Washer, Black Phosphate, 10 Piece Set
Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...