Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1995-2000 Escalade, Suburban, Tahoe, Yukon; Rear Window Glass; 3-Hole; Heated; Dk Privacy Tint
Reproduction of the original rear window glass designed for use with 1999-2000 Cadillac Escalade, and 1995-99 Suburban, and 1995-2000 Tahoe and Yukon models with rear wiper, and heated rear glass. Fits 1995-96 models from...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
1988-98 Chevrolet, GMC C/K GMT400 Series Truck, Blazer, Jimmy, Suburban; Front Bumper; Chrome
Reproduction chrome front bumper for 1988-98 Chevrolet and GMC 2 door or extended cab models. Manufactured to exact factory specifications, this reproduction chrome bumper is designed to replace the original in every detail....
1988-98 Chevy, GMC C/K Pickup, 1992-99 SUV; Radiator Support Bushing Kit; 10 Piece Set
Reproduction radiator support bushing set for 1988-98 Chevrolet and GMC C/K GMT400 Series pickups, 1992-94 Chevrolet Blazer, 1995-99 Chevrolet Tahoe, 1992-99 GMC Yukon, and Chevrolet/GMC Suburban models. Manufactured to...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
Reproduction paintable front bumper for 1988-98 Chevrolet or GMC GMT400 Series 2 door or extended cab pickup models. This excellent quality bumper is designed to replace the original in every detail. Features holes for...
1989-2000 Chevy, GMC Pickup, 1992-2000 Blazer, Yukon; Front Door Latch; LH Drivers Side;
OER® Authorized reproduction of the original front door latch designed for use with various 1989-2000 Chevrolet and GMC truck models. Each latch is precision manufactured in stamped steel and built to exact factory...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1988-2002 Chevy, GMC Pickup, Blazer, Suburban; Inner Front Fender Skirt; LH Driver Side
Restore the original appearance of your 1988-2002 Chevrolet or GMC truck with this high-quality reproduction front inner fender skirt. Designed for Pickup, Blazer, Tahoe, Suburban, Jimmy, Yukon, and Suburban models, this...
Reproduction upper front door hinge for various Chevrolet and GMC GMT400 Series models including 1988-98 C/K Pickup, 1992-94 Blazer, Jimmy, 1992-99 Suburban, 1995-00 Tahoe, and 1992-00 Yukon models. Each door hinge is...
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
1988-98 Chevy, GMC C/K Pickup Truck; Outer Door Sport Mirror; Black; RH Passenger Side
Reproduction outer door sport mirror for 1988-98 Chevrolet and GMC C/K (GMT400 Series) truck and SUV models. Each mirror is manufactured to precise factory specifications ensuring a correct fit and finish. The mirror housing...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1977-2005 Buick, Chevy, Pontiac, Oldsmobile;;Hood Latch Assembly; Various Models
Reproduction hood latch assembly for various 1977-2005 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed below. Each latch is designed as a direct replacement for the worn or inoperative original....
Reproduction of the original style outer door mirror designed for use with 1988-02 Chevrolet and GMC C/K pickup, 1992-94 Blazer, 1995-00 Tahoe, and 1992-99 Suburban models. Each mirror is precision-manufactured to OEM...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
OER® Authorized reproduction of the front door window regulator with power windows for use with various 1992-2002 Chevrolet and GMC truck models as listed. This window regulator is manufactured to the correct factory...
1988-02 Chevy, GMC Pickup, Blazer, Tahoe, Suburban; Manual Outer Door Mirror; Chrome; LH Driver Side
Each mirror is precisely manufactured to original GM specifications featuring a brilliant chrome plated finish for a factory-correct look. Includes the mounting base and gasket for easy installation. Features and Benefits:...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
Reproduction outer door mirror for the RH (passenger) side of 1988-2000 Chevrolet and GMC C/K (GMT400 Series) pickup, Blazer, Jimmy, Yukon, Suburban, and 2001-2002 Chevrolet C3500HD (GMT400) models. This mirror is built to...
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
1967-81 GM; Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; for Hood Hinges; 8 Piece Set; Various Models
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
1988-2002 Chevy Pickup, Tahoe, Yukon, Suburban; Front Bumper Guard; LH Drivers Side
Reproduction of the original front bumper guard designed for use with 1988-02 Chevrolet and GMC C/K pickup models, 1992-99 Tahoe/Yukon and Suburban models. This bumper guard is manufactured to factory specifications...
Hex Washer Head Spin Lock Bolt; Phospate Coating; 5/16" X 18 X 1-1/4"; Set of 24
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished in a black phospate coating for an authentic original appearance and corrosion resistance. Set of 24. Use as required. Product Specifications: Thread...
Reproduction front lower air deflector for 1988-00 Chevrolet and GMC 2 door and extended cab GMT400 Series pickup models, and 1992-1994 Blazer, 1995-2000 Tahoe, 1992-2000 Yukon, and 1992-1999 Suburban models. This version...
Reproduction windshield wiper arm for 1994-00 C/K (GMT400/480 style) Chevrolet & GMC pickup truck, 1994-02 C3500 HD, and 1994-00 Blazer/Jimmy/Suburban GMT410/415/420/425/430 style) models. Each arm is produced in steel and...
Reproduction windshield wiper arm for 1994-00 C/K (GMT400/480 style) Chevrolet & GMC pickup truck, 1994-02 C3500 HD, and 1994-00 Blazer/Jimmy/Suburban GMT410/415/420/425/430 style) models. Each arm is produced in steel and...
1995-98 Chevy, GMC Pickup, Tahoe, Suburban, Yulon; Exterior Door Handle; Chrome; LH Driver Side
Reproduction of the original exterior door handle designed for use with various Chevrolet and GMC truck models. Each handle is precision manufactured to match the factory GM design, ensuring an accurate fit, appearance, and...
OER® Authorized reproduction of the original style power front door window regulator without motor for 1992-2000 Chevrolet and GMC truck models. Manufactured to original specifications and designed for use with power...
Reproduction of the original Trico Style wiper blade refill designed for use on the various models that require a 16" Trico style rainbow type wiper blade. Each wiper blade assembly will replace the original and offer years...
#10-24 x 1"; Phillips Oval Head Head Machine Screw; Stainless Steel
Stainless Steel Phillips #10-24 x 1" Oval Head Head Machine Screw. Sold individually. Specifications: Thread Diameter : 10-24 Length : 1" Head Style : Phillips Oval Head Size : Std Material : 18-8 Stainless Steel
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
1988-02 Chevy, GMC Truck; Front Bumper Impact Strip; Black/Chrome; RH Passenger Side
Reproduction of the original front bumper impact strip for various 1988-2000 Chevrolet and GMC truck models with bumper guards. This reproduction attaches to the bumper and acts as an impact point that helps protect the...
Reproduction of the original front bumper impact strip for various 1988-2000 Chevrolet and GMC truck models with bumper guards. This reproduction attaches to the bumper and acts as an impact point that helps protect the...
Reproduction door glass sash channel assembly for 1981-86 Chevrolet and GMC C/K and 1987-91 R/V truck models. This is the stamped aluminum sash that the door glass sits into at the base of the glass. The regulator attaches to...
1995-2000 Chevy GMC Pickup, Tahoe, Suburban, Yukon; Front Outer Door Handle; RH Passenger Side
OER® Authorized reproduction of the original outer front door handle designed for use with 1995-00 Chevrolet and GMC pickup, extended cab models, 1995-00 Tahoe/Yukon, Suburban and Escalade (except Denali) models. Replace...
1994-2002 Chevrolet, GMC; Front Bumper Filler Panel Extension; RH Passenger Side
Quality reproduction front bumper filler panel extension for 1994-1998 Chevrolet and GMC C/K series pickup truck (except 3500HD), and 1994-2000 Tahoe/Yukon and 1994-1999 Suburban/Yukon models. Manufactured to factory...
1994-2002 Chevrolet, GMC Truck; Front Bumper Filler Panel Extension; LH; Driver Side
Quality reproduction front bumper filler panel extension for 1994-1998 Chevrolet and GMC C/K series pickup truck (except 3500HD), and 1994-2000 Tahoe/Yukon and 1994-1999 Suburban/Yukon models. Manufactured to factory...
OER® Authorized reproduction outer door handle for the overhead style rear gate on 1992-94 Blazer, 1992-2000 Tahoe, and Yukon (without Denali Package), 1992-99 Suburban, and 1999-00 Escalade. Produced in cast zinc metal...
Replacement washer pump designed for use with various 1970-2018 General Motors vehicles as listed. This quality replacement washer pump is an alternative to the original, and more expensive Delco washer pump. Installs as...
U-Nut Set; M6 - 1.0; Panel Range.030" to.160"; Black Phosphate; 25 Piece Set
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160"). Set of 25 u-nuts. Specifications: OE #: 11503957 Quantity:...
1975-2014 Chevrolet, Pontiac; Windshield Washer Tank Cap; with Windshield Washer Logo
Reproduction windshield washer jar cap for various 1975-2014 GM models. This injection molded cap features the "windshield washer" logo on the cap. Each cap is manufactured with injection molded ABS replicating the original...
1988-2002 Chevy, GMC Truck; Front License Plate Bracket; without Bumper Impact Strip
Reproduction front license plate bracket for 1988-2002 Chevrolet and GMC C/K pickup truck models, and 1992-99 Tahoe/Yukon and Suburban models. Each license plate bracket is designed and manufactured to replace the original...
1995-00 Chevrolet GMC Truck; Exterior Door Handle; Rear Side Door; Textured; Black; LH
Reproduction exterior rear side door handle for 1995-00 Chevrolet and GMC pickup, crew cab models, and 1995-00 Tahoe/Yukon, Suburban and Escalade (except Denali) models. Replace your faded or damaged original with this...
Reproduction exterior door handle for the split style rear cargo doors on 1999-2000 Cadillac Escalade, 1995-2000 Tahoe, Yukon (without Denali Package), and 1995-99 Suburban. Features a textured black finish. Replaces OE #'s...
Installation hardware set for various 1985-92 Camaro models including IROC-Z models. Each set includes 18 of reproduction # 11508023 bolt. Specifications: Quantity: Set of 18 Class: 9.8 Color: Black Phosphate Material: Steel...
Replacement black nylon 1-3/4" hood insulation retainer is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models...