1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models
1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1993-97 Camaro, Firebird; Fuel Tank; with Fuel Neck; Zinc Coated; 15 Gallon Tank
Reproduction of the original style fuel tank designed for use with 1993-97 Camaro and Firebird models. Each fuel tank is manufactured in quality stamped steel to factory specifications featuring a zinc coating offering long...
1957-69 Buick, 1968-70 Chevrolet; Vented Gas Cap; with Markings
Reproduction GM gas cap that includes the correct "S" rivet and properly engraved markings. Manufactured and designed from the original OEM cap, the quality and materials are manufactured to exact specification with the "show...
1994-99 Chevrolet, GMC, Suburban; Fuel Tank; Zinc Coated; Diesel Fuel; 42 Gallon
Correct reproduction of the original fuel tank designed for with 1994-99 Chevrolet and GMC Suburban C/K 1500, and 2500 Diesel fuel models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc...
Correct reproduction of the original fuel tank designed for 1998-2002 Chevrolet C2500, C3500, GMC C2500 and C3500 models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the...
Correct reproduction of the original fuel tank designed for 1992 Chevrolet Blazer, 1995-97 Chevrolet Tahoe, 1992-97 GMC Yukon models. This reproduction fuel tank is manufactured in zinc coated steel to protect against...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1990-97 Chevy, GMC Pickup; Zinc Coated Fuel Tank; Gas Powered; 2-Door Extended Cab; 31 Gallon Tank
Correct reproduction fuel tank for 1990-97 Chevrolet and GMC pickup truck models with 2 door extended cab. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for rust and corrosion...
Correct reproduction of the original fuel tank designed for with 1992-97 Chevrolet and GMC 3500 pickup truck models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for rust and...
1990-97 Chevrolet, GMC Pickup 1500, 2500 Fuel Tank; 2-Door Extended Cab; Diesel Fuel; Zinc Coated
Correct reproduction of the original fuel tank designed for with 1990-91 Chevrolet and GMC C/K 1500/ 2500 Diesel fuel pickup trucks, and 1992-97 1500/2500 models with Diesel (except 3500). This reproduction fuel tank is...
1996 Chevrolet S10, Blazer, GMC S15; Fuel Tank; without Filler Neck; 18 Gallons
Correct reproduction of the original fuel tank designed for 1996 Chevrolet S10, Blazer and GMC S15 models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the elements while...
1995 Chevrolet S10, Blazer, GMC S15; Fuel Tank; without Filler Neck; 18 Gallons
Correct reproduction of the original fuel tank designed for 1995 Chevrolet S10, Blazer and GMC S15 models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the elements while...
1988-97 Chevrolet, GMC Pickup; Fuel Tank Neck and Evaperator Hose Set; with Clamps
Reproduction of the original fuel tank filler neck, hoses, and hardware kit designed for use with 1988-97 gas Chevrolet and GMC C/K series pickup truck models. Filler necks are manufactured using heavy duty steel replicating...
Reproduction fuel tank support hanger, bracket and strap for 1988-98 Chevrolet and GMC C/K-Series GMT400 truck models. Each support hanger is manufactured in quality stamped steel to original factory specifications for an...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1968-72 Camaro, Impala, Nova; Holley Throttle Cable Bracket
Reproduction of the original style Holley throttle cable bracket designed for use with various 1968-72 Chevrolet models. Each cable bracket is manufactured in stamped steel to original factory specifications making this...
1968-70 Camaro, Firebird, Nova, Impala; Fuel Tank Vent Valve
Reproduction of the original gas tank vent valve that's installed on various 1968-70 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured in injection molded plastic to factory specifications. This commonly damaged...
1993-97 Camaro, Firebird; Fuel Tank Filler Neck
Reproduction of the original fuel tank filler neck for use with 1993-97 Camaro and Firebird models. Manufactured to factory specifications featuring the correct gas cap opening for proper fit, and functionality. Each filler...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Reduce heat coming off of the intake with this reproduction carburetor base gasket with heat shield, installs between the carburetor and intake manifold. This gasket and shield was original equipment for most 1970 Chevrolet...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1988-2000 Chevy, GMC Truck; Fuel Tank Mount Straps; 6" Bed, 25 Gal Tank; Coated Steel; Pair
Reproduction of the original style fuel tank mounting straps designed for use with 1988-2000 Chevrolet and GMC pickup truck models. Each strap is manufactured in quality to original factory dimensions replicating the original...
Reproduction of the original fuel tank mounting straps designed for use with 1988-2000 Chevrolet, GMC pickup truck models with 8 foot bed, 34 gallon tank. Each strap is manufactured in quality stamped steel, galvanized and...
Reproduction of the original fuel tank mounting straps designed for use with 1988-2000 Chevrolet, GMC pickup truck models with 8 foot bed, 34 gallon tank. Each strap is manufactured in quality stainless steel for long-lasting...
Reproduction of the original OE rubber bumper for use with 1979-86 Chevrolet and GMC C/K pickup truck models, and 1987-91 Chevrolet and GMC R/V models. Also fits other areas of the vehicle including the heat exhaust shield,...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1993-97 Camaro, Firebird; Ni-Terne Coated Fuel Tank; 15 Gallon Capacity
Quality reproduction of the original fuel tank designed for use with 1982-92 Camaro and Firebird models with the fuel pump in the tank. Each fuel tank is manufactured to factory specifications and features an original,...
Reproduction of the original style fuel tank designed for use with 1970-74 Impala, Bel Air, Biscayne, Catalina, Bonneville and GM full size station wagon models. This fuel tank is made of zinc-coated steel and has a capacity...
Reproduction of the original style fuel tank designed for use with 1968-70 Impala, Bel Air, Biscayne, Catalina, Bonneville station wagon models. This fuel tank is made of zinc-coated steel and has a capacity of 22 gallons (91...
Reproduction clips used to mount the fuel line to the frame. Includes six 3/8" clips. Applications: 1967-69 Chevrolet Camaro - Big Block 1967-69 Chevrolet Camaro - Small Block w/4bbl 1965-86 Chevrolet/GMC Truck 1965-70...
1988-97 Chevrolet, GMC C/K Truck; Fuel Tank; Zinc Coated; 34 Gallon
Reproduction fuel tank assembly for 1988-1997 Chevrolet & GMC 2 door (C/K) pickup truck models. Comes complete with the locking ring for the fuel sender and the fuel sender sealing O-ring. Each tank is manufactured in stamped...
1988-2000 Chevrolet, GMC C/K Short Bed Pickup; Zinc Coated Fuel Tank; 25 Gallon; Standard Cab
Replacement fuel tank for various 1988-00 Chevrolet and GMC truck models. This fuel tank measures 48 1/2" x 16 1/2" x 14 1/8". This fuel tank is zinc-coated steel and has a capacity of 25 gallons (95 liters), features a pan...
1992-97 Chevrolet, GMC Suburban; Fuel Tank; Zinc Coated; 42 Gallon Tank
Correct reproduction of the original fuel tank designed for with 1992-97 Chevrolet and GMC Suburban C/K 1500, and 2500 gasoline models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc...
1965-74 Holley; Carburetor Heat Shield; 4 Barrel with 396,454 Engine
OER® reproduction carburetor heat shield for all GM models with a Holley 4 bbl carburetor. This heat shield will help cool the intake charge for better performance. Original for 1970 396ci & 454ci with Special...
Correct reproduction of the original fuel tank designed for 1990-1997 Chevrolet C2500, C3500, GMC C2500 and C3500 models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the...
Correct reproduction of the original fuel tank designed for with 1992-97 Chevrolet and GMC 3500 pickup truck models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for rust and...
Correct reproduction of the original fuel tank designed for 1984-1988 Buick Regal, Chevrolet Monte Carlo, Oldsmobile Cutlass and other "G-Body" models. This reproduction fuel tank is manufactured in zinc coated steel to...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
1958-60 Impala, Bel Air, Biscayne; Fuel Tank Sending Unit; with 348 ci; 3/8" Inlet
Reproduction fuel tank sending unit for 1958-60 Chevrolet Impala and Full Size models with 348ci engines. Features the original design for an authentic fit and genuine appearance. Each sending unit includes the sender,...
1983-96 Chevrolet G10, G20, GMC G1500, G2500; Fuel Tank; without Filler Neck; 22 Gallons
Correct reproduction of the original fuel tank designed for 1983-96 Chevrolet G10, G20, GMC G1500 and G2500 models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1983-85 Chevrolet S10, Blazer, GMC S15; Fuel Tank; without Filler Neck; 13.2 Gallons
Correct reproduction of the original fuel tank designed for 1983-1985 Chevrolet S10, S10 Blazer and GMC S15 Jimmy models. This reproduction fuel tank is manufactured in zinc coated steel to protect against corrosion from the...
1958-60 Impala, Bel Air, Biscayne; Fuel Tank Sending Unit; 5/16" Inlet; 6 or 8 Cyl.; Except 348 ci
Reproduction fuel tank sending unit for various 1958-60 Chevrolet Impala and Full Size hardtop and sedan models. Features the original design for an authentic fit and genuine appearance. Each sending unit includes the sender,...
1961-64 Impala, Bel Air, Biscayne 6 Pass Station Wagon; Fuel Tank Sending Unit; with 5/16" Line
Reproduction of the original fuel tank sending unit designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne station wagon models with 5/16" line. Each sender is produced in quality steel to resist corrosion...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
1982-2002 Camaro, Firebird; Fuel Tank Mounting Straps; Stainless Steel; w/Rubber Inserts
Reproduction of the original style fuel tank mounting straps designed for use with 1982-2002 Camaro and Firebird models. Each strap is manufactured in quality stainless steel to original factory dimensions replicating the...
1958-60 Chevrolet; 6 Passenger Wagon, El Camino; Sedan Delivery; Fuel Sending Unit; with 3/8" Line
Reproduction fuel tank sender unit for 1958-60 Chevrolet 6-passenger station wagons, or 1959-60 El Camino models. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge...
1958-60 Chevrolet Station Wagon / El Camino; Fuel Sending Unit; With 5/16" Line
Reproduction fuel sender for 1958-60 Chevrolet full-size wagon or 1959-60 El Camino. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with the signal to indicate fuel...
Reproduction of the original fuel tank mounting straps designed for use with 1958 Impala, Bel Air, Biscayne, Brookwood, and Nomad station wagon models. Each strap is manufactured in quality stamped steel, galvanized and EDP...