1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1970-75 GM; Windshield Molding Clip; Each
Reproduction of the front and rear window molding clip for various 1970-74 GM models. Manufactured to factory specifications for proper fitment and function. Popular models and applications are listed below, but may fit...
1967-85 GM, 1967-81 Camaro, Firebird; Molding Clip Set; Front or Rear Window; Steel; Set of 24
Replacement windshield and rear window molding steel clips to fit a wide variety of applications on various GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary...
1965-72 GM; Molding Clip Set; Windshield, Quarter, Back Window; 12-piece Set
Replacement style windshield molding installation clips for various GM models including, 1966-67 Chevy II and Nova and 1965-69 Impala and Full Size models. Each clip is designed and manufactured to replicate the OE style...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1968-77 GM; Molding Clip; Windshield and Back Window Reveal Molding; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1988-99 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Body Side Molding; Black & Chrome; 25" Roll
Original style body side molding designed for use on 1988-99 Chevrolet and GMC pickup truck, Suburban, Blazer, and Jimmy models. Manufactured like originals but not pre-cut, this molding set features the correct chrome finish...
Reproduction front windshield and back window molding retainer clip set designed for use with a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is...
1967-72 GM; Molding Clip; Windshield or Back Window; Upper; Lower; Each
Reproduction of the D-Shaped front windshield or back window molding clip for various 1967-72 GM models. Manufactured to factory specifications for proper fitment and function. Use as required. Sold individually. Replaces OE...
1988-2000 Chevy, GMC GMT400, C/K Pickup, Suburban; Rear Wheel Opening Molding; Black; LH Driver Side
OER® Authorized reproduction of the original rear panel wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck and SUV models. Each molding is stamped to original factory specifications featuring...
OER® Authorized reproduction of the original front wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck and SUV models. Each molding is stamped to original factory specifications featuring correct...
1967-72 GM; Molding Clip; Windshield or Back Window; Upper, Lower; 24 Piece Set
Reproduction of the D-Shaped front windshield molding clip for various 1967-on GM models. Manufactured to factory specifications for proper fitment and function. Use as required. Replaces OE #'s 7698976, 8736591. Sold as a...
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1965-72 GM; Windshield, Back Window Molding Clip; Each
Reproduction of the original style rectangular-shaped front and rear window molding clip designed for use with various 1965-72 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured to factory specifications for...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1988-2000 Chevy, GMC GMT400 Pickup, Suburban; C/K; Rear Wheel Opening Molding;LH Driver Side
Reproduction rear wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck and SUV models. Each molding is stamped to factory specifications featuring correct contours and a bright chrome finish for an...
1965-72 GM; Windshield, Quarter, Back Glass Molding Clip Set; 25 Piece Set
Oldsmobile Windshield Molding Clips: 1965-1968 442 (except convertible) 1965-1968 Ninety-Eight (except convertible) 1965-1968 Cutlass (except convertible) 1965-1968 Delta 88 (except convertible) 1967-1968 Delmont 88 (except...
1964-76 GM; Molding Clip Set; Windshield/Rear Window; 10 pcs With Screws
Reproduction molding retainer clip set for a wide variety of 1964-72 GM models. Designed for emergency use, when a screw-on clip is required. Each clip is produced in spring steel to OE specifications and comes with phillips...
1968-77 GM; Molding Clip; Windshield and Back Window Reveal Molding; Stamped Steel; 24 pcs
Reproduction windshield and rear window molding steel clip set to fit a wide variety of GM makes and models. Each set will provide a snug fit for the molding being attached. The amount of clips will vary depending on the...
Reproduction front windshield and back window molding retainer clip set for a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is required. Each clip...
1966-76 GM; Molding Clip; Windshield and Rear Window; With Screw
Reproduction molding retainer clip for a wide variety of 1964-72 GM models. Designed for emergency use, when a screw-on clip is required. Produced in spring steel to OE specifications. Sold individually. Replaces OE #...
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
Screw Set, Phillips Ovl # 8 X 3/4" Screw, 12 Pcs
Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 12 chrome phillips oval head #8 x 3/4" screws. Set includes 12 phillips oval head screws. Use as...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually.
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1969-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated
Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....
1962-87 GM; Wheel Well Molding Screw Set; Phillips; 8-18 x 3/8" L; 3/8" Head; Silver; 36 Piece Set
Reproduction of the original style screws designed for use with various GM models. This screw set can be used for all four wheel opening moldings. Replace your missing or worn out wheel well molding screws with this 36 piece...
1988-2000 Chevy, GMC GMT400 Pickup, Suburban; C/K; Front Wheel Opening Molding; RH Passenger Side
Reproduction front wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck models. Each molding is stamped to original factory specifications featuring correct contours and a bright polished finish for a...
Phillips Head 8-18 x 3/8" Molding Screw; 9/32" Diameter Washer Head; Silver Zinc-Plated
Retaining screws for installation of moldings or other trim that requires a 9/32" diameter round washer head phillips screw. Each zinc treated screw measures 8-18 x 3/8". These screws can also be used on various GM, Ford and...
OER® Authorized reproduction of the original rear panel wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck and SUV models. Each molding is stamped to original factory specifications featuring...
OER® Authorized reproduction of the original front wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck and SUV models. Each molding is stamped to original factory specifications featuring correct...
1994-97 Chevrolet S10 Pickup, S10 Blazer; Wheel Well Opening Molding; Front; RH
Reproduction front fender wheel opening molding for 1994-97 Chevrolet S10 pickup trucks, and 1994 S10 Blazer models. Each molding is manufactured to correct factory dimensions ensuring an authentic appearance and fitment....
1994-97 Chevrolet S10 Truck; Wheel Well Opening Molding; Rear RH
Reproduction rear passenger side wheel well opening molding for 1994-97 Chevrolet S10 truck models. Each molding is manufactured to correct factory dimensions ensuring an authentic appearance and fitment. Fits the rear RH...
1994-97 Chevrolet S10 Pickup, S10 Blazer; Wheel Well Opening Molding; Front LH
Reproduction front fender wheel opening molding for 1994-97 Chevrolet S10 trucks, and 1994 S10 Blazer models. Each molding is manufactured to correct factory dimensions ensuring an authentic appearance and fitment. Fits the...
1938-1972 Chevrolet, GMC; License Plate Panel Pinch Clip, Various GM Applications; Each
Correct style metal pinch clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment...
Molding Clip Stud Screw Set; #4 x 3/8" with 1/8" Shoulder; Zinc Plated; Package of 10
Replacement mounting screw set for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be...
1988-2000 Chevy, GMC GMT400 Pickup, Suburban; C/K; Rear Wheel Opening Molding; RH Passenger Side
Reproduction rear wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck and SUV models. Each molding is stamped to factory specifications featuring correct contours and a bright chrome finish for an...
1988-2000 Chevy, GMC GMT400 Pickup, Suburban; C/K; Front Wheel Opening Molding; LH Driver Side
Reproduction front wheel opening molding for 1988-2000 Chevrolet and GMC GMT400 Series truck models. Each molding is stamped to original factory specifications featuring correct contours and a bright polished finish for a...
1938-1972 GM; Pinch Clip, Various GModels; Bulk Set of 25 Piece Set
Correct style metal pinch clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment...
1938-1972 GM Vehicles; Pinch Clip, Various GM Applications; Set of 15
Correct style metal pinch clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment...
Tapping Screw; Phillips Flat Washer Head; #8 x 3/4"; Black; Each
Replacement Phillips flat top washer head tapping screw used on various GM vehicles. Each screw is a #8 x 3/4" long Pillips flat top washer head with a black E-coat. Quantities vary by model. Use as needed. Can be used with...
1994-97 Chevrolet S10 Pickup, S10 Blazer; Wheel Well Opening Molding; Rear; LH
Reproduction rear wheel opening molding for 1994-97 Chevrolet S10 pickup trucks, and 1994 S10 Blazer models. Each molding is manufactured to correct factory dimensions ensuring an authentic appearance and fitment. Fits the...
Speed Nut 1/4" X 7/8" Dia. X 11/16" O.D.; Pair
Replacement molding clip retaining speed / pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing...
#8 x 3/4" Phillips Head Tapping Screw; Black Oxide; #6 Head
Replacement black trim screw for use on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality reproduction of the original black phillips head...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 8 Piece Set
Retaining screws for installation of moldings or other trim that require a 9/32" diameter round washer head #8-18 phillips screw. Each zinc-plated screw measures 3/8" long. Each set includes 8-pieces which is enough for the...
Hex Flanged Stamped Steel Thread Cutting Nut;.88mm Diameter; With Mastic Sealant; Set of 8
Reproduction stamped steel thread cutting nut set for a variety of applications including for use to secure the tail light bezels on 1974-78 Firebird and other models. Can be used anywhere on your car where a 1/4" post...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head, 10 Piece Set
Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...
Screw Set; Chrome Plated ; #8 x 3/4" Oval Phillips Head ; Set of 8 ;
Original style oval head chrome screw set designed to install sill plates, headlamp bezels, shift plates and other various components and parts. Includes 8 chrome phillips oval head #8 x 3/4" screws. Use as required. Can be...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
# 8 x 3/4" Oval Phillips Head Screw; Black Oxide; #8 Head
Original style oval head black-oxide screw originally used to install moldings, grill and headlamp bezels, and various other components and parts on classic American cars and trucks. Sold individually. Use as required. Can be...
1955-76 Chevrolet Bel Air, 150, 210, Impala, Caprice; Fender Skirt Rubber Seal ; 120" Long; OER
Reproduction fender or quarter panel skirt rubber seal for various 1955-76 Chevrolet models. Manufactured to correct dimensions from quality EDPM rubber that replicates the original in fitment and appearance. Measures 120"...